Faber 630006499, 630006498, 630006500, 630006501 User Manual
NEW MODEL - 500 AND 280 CFM AVAILABLE
Tender
traditionally styled value rangehood
wall canopy rangehood
°
sleek styling
°
500 cfm or 280 cfm motor
°
2 halogen lights
°
3 speed slide controls
°
dishwasher safe grease filters
°
convertible to ductless*
°
6” round duct
°
* it is highly recommended that
professional style cooking always be
vented to the outside.
Decorative Collection
Size/Color/Model #
500 CFM models
30 Stainless (NEW)
36 Stainless (NEW)
280 CFM models
30 Stainless (NEW)
36 Stainless (NEW)
a
24” High Backsplash
24” high, mounts to the wall beneath
c
the rangehood for a coordinated look
c
30 x 24 Stainless
e
36 x 24 Stainless
s
30” High Backsplash
30” high, mounts to the wall beneath
s
the rangehood for a coordinated look
o
30 x 30 Stainless
36 x 30 Stainless
r
High Ceiling Chimney Kit
i
One 39” upper chimney to replace 21
e
10/16” upper chimney that came with hood
s
Stainless 620000648
630006498
630006499
630006500
630006501
6098835
6098815
620000095
620000096
Designed to offer a high-end decorative
look while taking into consideration great
value. Traditional styling, standard features,
and solid performance make the Tender a
great choice in canopy rangehoods.
Ductless Conversion Kit
Includes: • Lower Chimney with holes for ducting • Ductless Diverter Assembly • Vent Grates
• Charcoal Filter
Stainless
Replacement Charcoal Filter
620000649
6093034
p.o. box 435 • Wayland, MA 01778 • tel: (508) 358-5353 • fax: (508) 358-5730 • e-mail: info@faberonline.com • www.faberonline.com
Dimensional Diagrams
30” Ducted
36” Ducted
Pre-Planning Your Installation - Important: Consult the installation instructions before you begin installing this rangehood.
Ducted
For ducted installations
the chimneys are adjustable and
designed to meet varying ceiling
heights between 7’ 9 2/16” and 9’
11 2/16” depending on the distance
between the bottom of the hood
and the cooktop (distance x in the
ducted diagram).
For shorter ceilings, have
the chimney cover(s) cut at a sheet
metal shop. For higher ceiling
installations, the High Ceiling
Chimney Kit includes a new 39”
upper chimney which would replace
the 21 10/16” upper chimney that
came with the hood.
21 10/16
22 1/16”
1” min
” max
7/16”
9
x
upper
chimney
lower
chimney
canopy
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
also consult cooktop
manufacturer's recommendation
19”
min & max ceiling height examples
x = 24"
min
7'
9 2/16"
max
9'
5 2/16"
x = 26"
7'
9'
min
11 2/16"
max
7 2/16"
x = 28"
min
8'
1 2/16"
max
9'
9 2/16"
x = 30"
min
8'
3 2/16
max
9'
11 2/16"
36”
cabinet base
Note: If 24” or 30” High Backsplash is being installed, the distance between the bottom of the hood and the cooktop (distance x in diagram) is equal
to the height of the Backsplash.
Pre-Planning Your Installation - Important: Consult the installation
instructions before you begin installing this rangehood.
Make your ductrun as straight and short as possible. The ductrun should not exceed
35 equivalent feet if ducted with the required minimum of 6” round duct. Count 45º
angles as 3 feet, 90º elbows as 5 feet, and 90º at elbows as 12 feet.
For best results, use no more than three 90° elbows. Make sure that there is a
minimum of 24” of straight duct between elbows if more than one is used. Do
not install two elbows together. If you must elbow right away, do it as far away
from the hood’s exhaust opening as possible.
Ductless Installations*
For installations where ductwork is impossible or highly impractical, a Ductless
Conversion Kit is available. A charcoal
filter, which attaches under the blower
assembly, absorbs smoke and odors. A
ductless diverter assembly directs the air
out to a lower chimney with vent grates cut
into the sides.
* it is highly recommended that
professional style cooking always be
vented to the outside.
Rev. 06/08
WARNING! Product specications are subject to change without notication. Consult the installation instructions before you begin installing this rangehood.
Loading...