Faber 630000815 User Manual
Axia Isola
a sophisticated silhouette
island canopy rangehood
°
sleek styling
°
600 cfm PRO motor
°
Silent Kit noise reduction
°
4 halogen lights
°
3 speed control
°
integrated control panel
°
stainless steel baffle filters
°
modified pro depth
°
convertible to ductless*
°
adjustable mounting system
°
Easy Cube motor access
°
sone range: 3.5 - 6.5
°
6” round duct
°
* it is highly recommended that professional
style cooking always be vented to the
outside.
D E S I G N E R
pro-style baffle filters with
European flair and a built-in
grease control system; bright
ha log en lights en cir cled
by a stylish stainless bezel
Size/Color/Model #
36 x 29 Stainless
48 x 29 Stainless
The slim stainless steel and
glass profile of the Axia Isola
is perfect for the sleek and
modern kitchen. The quiet,
600 cfm PRO motor is located
in the chimney, allowing for an
ultra thin canopy and room for
a view. Part of the
collection, the Axia Isola
looks and performs equally well
over professional or European
style cooking surfaces.
a c c e s s o r i e s
Ductless Conversion Kit
Includes: • Lower Chimney with hole for
ducting • Ductless Diverter Assembly •Vent
Grate • Charcoal Filter
Stainless
Replacement Charcoal Filter
p.o. box 435 • Wayland, MA 01778 • tel: (508) 358-5353 • fax: (508) 358-5730 • e-mail: info@faberonline.com • www.faberonline.com
630000815
630001068
plus
designer
plus
620000042
620000041
Mounting Support
Template
The hole in the ceiling for the ductwork should not be centered over the exact center of the cooking surface as the
duct work that runs up inside the chimney and through the ceiling is not in the exact center of the chimney.
upper
chimney
cover
ductless
lower
chimney
cover
canopy
cabinet base
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
also consult cooktop
manufacturer's recommendation
1" min
7" max
31"
36”
x
min & max ceiling height examples
x = 30"
min
8' 4 5/8"
max
8'
10 5/8"
x = 28"
min
8' 2 5/8"
max
8'
8 5/8"
x = 26"
min
8' 5/8"
max
8'
6 5/8"
x = 24"
min
7'
10 5/8"
max
8'
4 5/8"
20"
2
5/8”
3 3/4”
upper
chimney
cover
lower
chimney
cover
canopy
cabinet base
x = distance from hood to cooktop
(varies depending on installation)
min - 24”, suggested max - 30”
also consult cooktop
manufacturer's recommendation
3
3/8”
min
14
3/8”
max
23
5/8”
2
5/8”
36”
x
min & max ceiling height examples
x = 30"
min
7'
11 5/8"
max
8'
10 5/8"
x = 28"
min
7'
9 5/8"
max
8'
8 5/8"
x = 26"
min
7'
7 5/8"
max
8'
6 5/8"
x = 24"
min
7' 5 5/8"
max
8'
4 5/8"
Dimensional Diagrams
Ducted Ductless
Note: The Ductless Vent
Grate exhausts toward the
rear of the chimney.
Pre-Planning Your Installation
-
Important: Consult the installation instructions before you begin installing this rangehood.
Ducted
The ducted Axia Isola Plus chimney can be adjusted for ceilings between 7ʼ 5 5/ 8” and 8ʼ 10 5/ 8” depending on the distance between the bottom of the hood and the cooktop
(distance x in above DUCTED diagram). The ductless Axia Isola Plus chimney can be adjusted for ceilings between 7ʼ 10 5/ 8” and 8ʼ 10 5/ 8” depending on the distance
between the bottom of the hood and the cooktop (distance x in above DUCTLESS diagram).
Pre-Planning Your Ductwork
Make your ductrun as straight and short as possible. The ductrun
should not exceed 35 equivalent feet if ducted with the required
minimum of 6” round duct. Count 45º angles as 3 feet, 90º elbows
as 5 feet, and 90º flat elbows as 12 feet.
For best results, use no more than three 90° elbows. Make sure
that there is a minimum of 24” of straight duct between elbows
if more than one is used. Do not install two elbows together. If
you must elbow right away, do it as far away from the hoodʼs
exhaust opening as possible.
WARNING! Product specifications are subject to change without notification. Consult the installation instructions
before you begin installing this rangehood.
Ductless Installations*
For installations where ductwork is
impossible or highly impractical, a
* it is highly recommended that professional style cooking always be vented to the outside.
ductless conversion kit is available. A
charcoal filter, which attaches under the
blower assembly, absorbs smoke and
odors. A ductless diverter assembly
directs the air out to a lower chimney
with a vent grate cut into the back.
Ductless
Rev.04/05
Loading...