Faber 620000362 User Manual

NEW MODEL
Orizzonte
The art of ventilation
LUXURY STYLING
stainless steel styling
°
artistic design, impeccable fit & finish
°
3 halogen bulbs with a dimmmer
°
°
Easy Cube™ Mounting System
°
18” mounting height for sleek cabinet design
°
HIGH PERFORMANCE TECHNOLOGY
Comfort-Panel™ perimetric suction system
°
600 cfm internal PRO™ blower model
°
pre-installed Silent Kit™ sound-proofing
°
STATE OF THE ART CONTROLS
push-button (LED) electronic controls on panel
°
4 pre-set speeds plus Intensive Power Boost
°
24-hour kitchen anti-pollution mode
°
30 minute delayed shut-down mode
°
grease filter saturation indicator
°
Designer Collection
DUCTING OPTIONS
top 6 “ round venting
°
convertible to ductless
°
Faber has redefined the rangehood with the new Orizzonte, a patented stainless steel angled ventilation panel that hangs on the wall behind the cooking surface.
Size/Color/Model #
36 x 30 Stainless (NEW)
a c
High Ceiling Chimney Kit
c
One 40” upper chimney to replace 16
e
1/8” upper chimney that came with hood
s
Stainless 620000362
s o r i e s
p.o. box 435 • Wayland, MA 01778 • tel: (508) 358-5353 • fax: (508) 358-5730 • e-mail: info@faberonline.com • www.faberonline.com
630006242
Ductless Conversion Kit
Includes: • Lower Chimney with holes for ducting
• Ductless Diverter Assembly • Vent Grates
• Charcoal Filter
Stainless
Replacement Charcoal Filter
620000363
620000041
Dimensional Diagrams
Ducted
MIN. 26 3/8" - MAX. 37 3/8"
Ductless
MIN. 32" - MAX. 38 1/8"
Pre-Planning Your Installation - Important: Consult the installation instructions before you begin installing this rangehood.
The suggested height to install the hood above the cooktop is 18” . The Orizzonte chimneys are adjustable and designed to meet varying ceiling heights. The
chimneys can be adjusted for ceilings between 7' 10 3/16" - 8' 9 3/16" for ducted installations and between 8’ 3 3/16” - 8’ 9 15/16” for ductless installations.
For shorter ceilings, have the chimney cover(s) cut at a sheet metal shop. For higher ceiling installations, the High Ceiling Chimney Kit includes a new 40” upper chimney which would replace the 16 1/8” upper
chimney that came with the hood.
Pre-Planning Your Installation - Important: Consult the installation
instructions before you begin installing this rangehood.
Make your ductrun as straight and short as possible. The ductrun should not exceed 35 equivalent feet if ducted with the required minimum of 6” round
duct. Count 45º angles as 3 feet, 90º elbows as 5 feet, and 90º at elbows as
12 feet.
For best results, use no more than three 90° elbows. Make sure that there is a minimum of 24” of straight duct between elbows if more than one is used. Do not install two elbows together. If you must elbow right away, do it as far away from the hood’s exhaust opening as possible.
Ductless Installations*
For installations where ductwork is impos­sible or highly impractical, a Ductless
Conversion Kit is available. A charcoal
filter, which attaches under the blower
assembly, absorbs smoke and odors. A
ductless diverter assembly directs the air out to a lower chimney with vent grates cut into the sides.
* it is highly recommended that professional style cooking always be vented to the outside.
Rev. 06/08
WARNING! Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this rangehood.
Loading...