FAAC 302210 User Manual

America’s radio controls,

from the leader in

wireless technology.

Radio control

applications

come in all

sizes, and

Multi-Code has

an answer for

every one.

Single and

multi-channel

versions.

Transmitters in

a variety of

case styles,

including mini,

micro, and standard

visor-clip/handhelds.

Wall-mounted key-

pads, both hardwire

and wireless.With

receivers to match a

full range of power

and installation

requirements.All radio

controls offer excellent range performance

and long-term reliability.

From gated communities to industrial sites;

from private residences to parking lots; from

single barrier arms to sophisticated gate systems,

Multi-Code by Linear is in control.

The Multi-

Code brand is

synonymous

with superior,

ultra-reliable

radio control,

as evidenced

by its prefer-

ence among

so many

installers of

gate operators

and systems,

garage door

operators, and commercial access control

systems, both for new construction and for

the replacement market. Now, the same

familiar, reliable RF controls you’ve been using

are available from a

dependable new

source—Linear. The

operative word is

dependable. Linear

has been a pioneer in

engineered RF prod-

ucts and a worldwide

supplier of wireless

security systems, access control systems and

wireless remote controls for over three decades.

There’s a Multi-Code

radio control

for every requirement.

Multi-Code Models At A Glance

RECEIVERS

General Purpose Gate

1090 1099-20 1099-30 1099-40 3021 3028

General Purpose 3089

••••••

4120

••••••

4140

••••••

3060

••••••

3083

••••••

3070

••••••

Gate 3022

••••••

Miscellaneous 4100

4200

••••••

TRANSMITTERS

Miniature Transmitters

Mini Transmitters:
Model 3060 One-Channel,

One-Button Transmitter

Model 3083 Two-Channel,

Two-Button Transmitter

Micr

o Transmitter:

Model 3070 One-Channel,

One-Button Transmitter

• Test/operate LED

• Neutral case with fine grain finish

• Molded-in hole to accept keychain
or keyring

• Supplied velcro strip for visor or dashboard mounting

• Two-channel model (3083) operates two independent
garage doors or an automatic gate and a garage door

• Operates with all Multi-Code receivers and transmitters

Specifications
Power: long-life 12 V battery

Frequency: 300 MHz (310 MHz also available for Models

3083, 3070)

Codes: 1,024 (set by sip switches)
Dimensions: mini (2.5 x 1.5 x .625 inches); micro

(2 x 1.5 x .625 inches)

Handheld Transmitters

Model 3089 One-Channel,

One-Button Transmitter

Model 4120 Two-Channel,

Two-Button Transmitter

Model 4140 Four-Channel,

Four-Button Transmitter

• Test/operate LED

• Neutral case color

• Molded design to comfortably
fit the hand

• Easy access to battery and dip
switch

• Two-channel model (4120) operates two independent
garage doors or an automatic gate
and a garage door; four-channel model (4140) provides
control of up to four separate operations

• Operates with all Multi-Code receivers and transmitters

Specifications
Power: long-life 9 V battery

Frequency: 300 MHz (310 MHz also available)
Codes: 1,024 on one and two-channel models; four-

channel features two sets of dip switches, offering 512
codes each
Dimensions: 3.75 x 2.5 x .875 inches

Gate Edge Transmitters

Model 3022 Wireless Safety Edge Transmitter

• For use with safety edges on gates and large
commercial doors

• Can be used where hard wires are impractical

• Easy to install and mount

• More economical than
coil/cord sets

Specifications
Power: 9 V battery

Frequency: 300 MHz (310 MHz

also available)

Codes: 1,024 (set by dip switches)
Dimensions: 4 x 4.28 x 2.22 inches

Wall-Mounted Lighted Keypads

Model 4200 Wireless Keypad

• Tamper-resistant and weatherproof

• Easy mounting with two screws

• 12-button, alphanumeric keypad

• LED mode indicator

• Operates with all Multi-Code receivers

Specifications
Power: 9 V battery

Codes: 4-digit PIN code access
Frequency: 300 MHz (310 MHz also

available)

Dimensions: 2.75 x 6.25 x 1 inches

4100 Series Hard-Wired Keypads

• Choice of models with independent
power supply for operation of many
different openers

• Tamper-resistant and weatherproof

• Easy mounting with two screws

• 12-button, alphanumeric keypad

• Operates with all Multi-Code receivers

Specifications
Available Models:

a. Model 4100-05: 24 Vac without

transformer, relay output, input voltage
of 18 to 33 volt ac at 75 mA min

b. Model 4100-15: 24 Vac with transformer,relay output,

input voltage of 18 to 33 volt ac at 75 mA min

Codes: 4-digit PIN code access
Switching Voltage: 30 volts at 1 amp ac or dc max
Dimensions: 2.5 x 6.0 x 1 inches

2055 Corte Del Nogal, Carlsbad, CA 92009

[phone] [phone] Fax [phone]

www.linearcorp.com • www.multi-code.com

Copyright 2000, Linear Corporation 99-289 P/N 217064 B Printed in Hong Kong

Model 3028 Light-Duty Commercial
Gate Receiver

• Identical to Model 3021, except for
enclosure

• Housed in light, stamped steel cabinet

• Ideal for sites with dual-channel
requirement and a protected
environment

Specifications
Power: 24 Vac ±10% power

Frequency: 300 MHz (310 MHz also

available)
Codes: 1,024 total (set by dip switches);
512 codes each of two channels
Dimensions: 6 x 8 x 2 inches

Accessories

Model 1066 Coaxial Cable

• For use with all 1099, 3021, and 3028 series receivers

• Includes 16 feet of coaxial cable with F-type
connectors at both ends, plus a BNC to F-type adapter
and a 5.25-inch mounting bracket with a 2.5-inch
outward extension

Model 1092-01 115 V Adapter Harness with Old
Style Terminal Block

• For use in applications with an older receiver
(with terminal lugs rather than spades)

• Includes six feet of wire, adapter to block, as well as
installation instructions

• 115 Vac transformer input

• Rated 1 amp @ 30 Vac maximum on relay contacts

Model 1092-06 24 Volt Adapter with Push/On
Connection

• For remote mounting where operator supplies 24V

power to radio through three terminal screws

• Push-on connectors at the radio and lugs for operator
terminal screws

• Includes three feet of wire

Model 1092-07 115 V Adapter Harness with
Push/On Connection

• For installations requiring a 115 Vac adapter

• Quick connection to 1090 receiver spade lugs (with lug
connections for operator pushbutton terminals)

• Includes six feet of wire (adapter to lug)

• 115 Vac transformer input

• Rated 1 amp @ 30 Vac maximum on relay contacts

Receivers

Model 1090 General Purpose Digital Receiver

• Exclusive two-way lugs fit under terminal screws or
accept push-on terminals in remote sites

• 11-inch wire antenna supplied

• Three tabs for universal operator
mounting

Specifications
Power: for connection to any

three-terminal 24 V operator (for higher
voltages, consult factory); no need for
separate transformer or adapter

Frequency: 300 MHz (310 MHz also available)
Codes: 1,024 (set by dip switches)
Dimensions: 3 x 5.5 x 1.5 inches

1099 Series Gate Receivers

• For use inside metal enclosures and in other
applications requiring stronger signal reception

• Antenna with coaxial connector supplied

• Three models for varying power inputs

• 1 amp output @ 30 Vac maximum on
relay contacts

Specifications
Available Models:

a. Model 1099-20: 115 Vac, transformer

input (included)
b. Model 1099-30: 24 V input
c. Model 1099-40: 12 V input

Frequency: 300 MHz (310 MHz also
available for Model 1099-30)

Codes: 1,024 (set by dip switches)
Dimensions: 5.25 x 3.625 x 1.5 inches

Model 3021 Heavy-Duty
Commercial Gate Receiver

• For any application requiring two channels in one
location — 512 codes each channel

• Up-down, open-emergency-stop,and other functions

• For heavy-duty operation

• Cabinet meets NEMA 13, JIC specs

• Two-channel relay output, N/O, N/C, Common — rated
1 amp @ 30 Vac max

Specifications
Power: 24 Vac ±10% power

Frequency: 300 MHz
Codes: 1,024 total (set by dip switches);

512 codes each of two channels

Dimensions: 6 x 8 x 4 inches