extrudr GREENTEC DATA SHEET

MATERIAL SAFETY DATA SHEET

extrudr GREENTEC

1. PRODUCT IDENTIFICATION

1.1 PRODUCT IDENTIFIER

TRADE NAME

Extrudr GREENTEC

1.2 MANUFACTURER

ADRESS

FD3D GmbH/Extrudr
Höchsterstraße 81
A-6972 Fußach

EMAIL

[e-mail]

1.3 USE OF PRODUCT

Biodegradable polymer compound, suitable for 3D printing filament

2. HAZARD IDENTIFICATION

CLASSIFICATION

LABEL ELEMENTS

SPECIAL ADVICE ON HAZARDS

No need for classification according to GHS criteria for
this product (according to Regulation (EC) No. 1272/2008
[CPL]).

According to Regulation (EC) No. 1272/2008 (CLP) his pro­duct does not require a hazard warning label in accordance
with GHS criteria.

Danger of burns in contact with hot polymer.
Hazardous vapours in case of burning.

3. COMPOSITION

CHEMICAL CHARACTERISTICS

ADDITIONAL INFORMATION

Biodegradable batch based on PLA, contains copolyester
and additives.

No harmful ingredients

MATERIAL SAFETY DATA SHEET

extrudr GREENTEC

12. January 2018

Page 1/4

4. FIRST-AID MEASURES

ON SKIN CONTACT

In case of contact with molten polymer immediately cool
the skin with cold water. Medical aid may be required to
remove adhering material and for treatment of burns.

AFTER INHALATION

After inhalation of decomposition gases or dust remove
patient to fresh air. Contact a doctor in case of discomfort.

ON INGESTION

No effects known. Rinse mouth with water and drink more
water. Contact a doctor in case of discomfort.

ON EYES CONTACT

Rinse open eyes thoroughly with water.

5. FIRE-FIGHTING MEASURES

SUITABLE FIRE EXTINGUISHING MEDIA

SPECIAL EXPOSURE HAZARDS

SPECIAL PROTECTIVE EQUIPMENT

REMARK

Water, dry chemical extinguisher, foam, carbon dioxide.

During incomplete combustion release of carbon mon­oxide, tetrahydrofurane, acetic acid and decomposition
products possible.

Self-contained breathing apparatus.

Accumulations of dust can be inflammable.

6. ACCIDENTAL RELEASE MEASURES

PERSONAL PRECAUTIONS

METHODS FOR CLEANING UP

Use suitable protective clothing. Avoid eye contact and
inhalation of dusts. Keep ignition sources away.

Sweep up material and place in a container, risk of slip­ping. Avoid ingress of material into drainage systems.

7. HANDLING AND STORAGE

HANDLING

STORAGE

Avoid contact with molten polymer. Avoid generation of
dust and electrostatic charge.

Protect against moisture and UV radiation. Store cool and
keep packaging closed when not in use. Avoid sources of
ignition.

MATERIAL SAFETY DATA SHEET

extrudr GREENTEC

12. January 2018

Page 2/4