Extron Electronics VTR001 User Manual

VTT001 and VTR001

Twisted Pair Transmitter and Receiver

User Guide

Twisted Pair

68-760-01 Rev. I

11 12

Safety Instructions

Safety Instructions • English

WARNING: This symbol, , when used on the product, is intended

to alert the user of the presence of uninsulated dangerous voltage
within the product’s enclosure that may present a risk of electric
shock.

ATTENTION: This symbol, , when used on the product, is intended to alert

the user of important operating and maintenance (servicing) instructions in
the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.

Instructions de sécurité • Français

avertissement: Ce pictogramme, , lorsqu’il est utilisé sur le produit,

signale à l’utilisateur la présence à l’intérieur du boîtier du produit d’une
tension électrique dangereuse susceptible de provoquer un choc
électrique.

attention: Ce pictogramme, , lorsqu’il est utilisé sur le produit, signale

à l’utilisateur des instructions d’utilisation ou de maintenance importantes
qui se trouvent dans la documentation fournie avec le matériel.

Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron,
réf. 68-290-01, sur le site Extron,

www.extron.fr.

Sicherheitsanweisungen • Deutsch

warnung: Dieses Symbol auf dem Produkt soll den Benutzer

darauf aufmerksam machen, dass im Inneren des Gehäuses dieses
Produktes gefährliche Spannungen herrschen, die nicht isoliert sind
und die einen elektrischen Schlag verursachen können.

Chinese Simplified（简体中文）

警告： 产品上的这个标志意在警告用户该产品机壳内有暴露的危险

电 压 ，有 触 电 危 险 。

注意： 产品上的这个标志意在提示用户设备随附的用户手册中有

重要的操作和维护(维修）说明。

关于我们产品的安全指南、遵循的规范、

使用的特性等相关内容，敬请访问 Extron

安全规范指南，产品编号 68-290-01

EMI/EMF 的兼容性、无障碍
网站 www.extron.com，参见 Extron

。

Chinese Traditional（繁體中文）

警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著

可能會導致觸電之風險的未絕緣危險電壓。

注意 若產品上使用此符號，是為了提醒使用者。

有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細

資訊，請瀏覽 Extron 網站：

性與法規遵守手冊》，準則編號 68-290-01。

www.extron.com，然後參閱《Extron 安全

Japanese

警告: この記 号 が製品上に表示されている場合は、筐体内に絶縁されて

いない高電圧が流れ、感電の危険があることを示しています。

注意: この 記号 が製品上に表示されている場合は、本機の取扱説明書に

記載されている重要な操作と保守 (整 備)の指 示についてユーザーの

  注意を喚起するものです。

Vorsicht: Dieses Symbol auf dem Produkt soll dem Benutzer in der im

Lieferumfang enthaltenen Dokumentation besonders wichtige Hinweise
zur Bedienung und Wartung (Instandhaltung) geben.

Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie
in den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer 68­290-01) auf der Extron-Website,

www.extron.de.

Instrucciones de seguridad • Español

ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto, avisa al

usuario de la presencia de voltaje peligroso sin aislar dentro del producto, lo que
puede representar un riesgo de descarga eléctrica.

atenciÓn: Este símbolo, , cuando se utiliza en el producto, avisa

al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.

Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y temas
relacionados, consulte la Guía de cumplimiento de normativas y seguridad
de Extron, referencia 68-290-01, en el sitio Web de Extron,

extron.es.

www.

安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に
つ い て は 、エ ク スト ロ ン の ウェ ブ サ イト www.extron.comより

『Extron Safety and Regulatory Compliance Guide 』 (P/N 68-290-01) をご覧くだ さ い 。

Korean

경고: 이 기호 , 가 제품에 사용될 경우, 제품의 인클로저 내에 있는 접지되지

않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을 경고합니다.

주의: 이 기호 , 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와

있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.

안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련
항목에 대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의
Extron 안전 및 규제 준수 안내서, 68-290-01 조항을 참조하십시오.

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference; the user must correct the interference at his own expense.

NOTE: This unit was tested with shielded I/O cables on the peripheral devices. Shielded

cables must be used to ensure compliance with FCC emissions limits.

For more information on safety guidelines, regulatory compliances,
EMI/EMF compatibility, accessibility, and related topics, see the “Extron Safety and

Regulatory Compliance Guide” on the Extron website.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Conventions Used in this Guide

Notifications

The following notifications are used in this guide:

WARNING: A warning indicates a situation that has the potential to result in death or

severe injury.

CAUTION: A caution indicates a situation that may result in minor injury.

NOTE: A note draws attention to important information.

Copyright

© 2012 Extron Electronics. All rights reserved.

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

Contents

Introduction ................................................... 1

Features ............................................................. 2

Installation ..................................................... 3

Rear Panel Connectors ....................................... 3

Front Panel Connector and Indicator .................. 6

Cabling and Setup .............................................. 7

Compatibilty with Other Extron Products ........ 8

Cable Testing .................................................. 8

Equalizing Pair Skew....................................... 9

Sharpness Adjustment.................................... 9

Mounting ...................................................... 10

Preparing the Wall Box ................................. 10

Reference Information ............................... 17

Parts List .......................................................... 17

VTT001 MAAP and VTR001 MAAP .............. 17

VTT001 and VTR001 Tabletop ...................... 17

VTR001 AAP ................................................ 17

Included Parts .............................................. 17

Skew-Free™ AV UTP Cables ........................ 18

Other Accessories ........................................ 18

VTT001 and VTR001 User Guide • Contents v

Introduction

The Extron VTT001 Twisted Pair (TP) Transmitter Series and VTR001 Twisted Pair Receiver
Series provide a system for sending VGA, RGBHV, ansd RGBS signals up to 500 feet
(150meters) over Extron Skew-Free AV UTP cable. They can also send these signals over
CAT5/5e/6shielded twisted pair (STP), unshielded twisted pair (UTP), or foil shielded
twisted pair (FTP) cable.

Both transmitter and receiver have remote power capability. For transmission distances up
to 300 feet, the applied power is required at either the transmitter or the receiver. Greater
distances require power to be applied locally to both transmitter and receiver.

Depending on the model, both transmitter and receiver modules may be mounted in a
wall, a rack, or in other Extron products that accept a double-sized MAAP panel (such as
CPM101, CPM200, and CPM112R), or Extron AAP mounting products; or they may be set
on a tabletop. The MAAP model comes in a black finish; the AAP model comes in a white
finish; and the tabletop model comes in a black finish.

The following table specifies the maximum recommended transmission distances for the
VTT001/VTR001 pair with a signal at 60 Hz.

Video Resolution Recommended

640 x 480 500 feet

800 x 600 400 feet

1024 x 768* 300 feet

1280 x 960* 200 feet

1280 x 1024* 200 feet

1360 x 765 200 feet

1365 x 768 200 feet

1366 x 768 200 feet

1440 x 900 200 feet

1440 x 1050 200 feet

1600 x 1200* 150 feet

NOTE: Video resolutions marked with an asterisk (*)

have the same range specification at 75 Hz.

Maximum Range

NOTES: • Extron recommends using at least 50 feet of TP cable between the transmitter

and the receiver.

• It is possible to exceed the recommended distances. However, image quality

may be reduced.

VTT001 and VTR001 User Guide • Introduction 1

Features

• Video sharpness control — Optimizes the video image for different cable lengths

between transmitter and receiver.

• Removable faceplate — The module faceplate may be removed for tabletop use or

attachment to an equipment rack.

• Compatibility — The VTR001 receiver also functions as the receiver for output from the

Extron IN1404XT video scaler, Extron TP T 15HD A, TP T 15HD AV, TP T BNC,
TPT15HD 45, TPX 88, TPX 88 A, and TP T BNC DA4.

• Remote power capability — Both transmitter and receiver can be powered remotely

when cable runs are 300 feet or less.

VTT001 and VTR001 User Guide • Introduction 2

Installation

VTR001-VTT001 Panel Layout 2

The Installation section describes:

• Rear Panel Connectors

• Front Panel Connector and Indicator

• Cabling and Setup

Rear Panel Connectors

Figure 1. VTT001 MAAP and VTT001 Rear Panel Views

1a

VTT001 MAAP

TX

9VDC-12VDC

500mA

2a

VTT001

TX

9VDC-12VDC

500mA

2b

1a

NOTE: The VTT001 MAAP and VTT001 models differ in how they are mounted (see

Mounting on page 10).

Figure 2. VTR001 MAAP, VTR001, and VTR001 AAP Rear Panel Views

NOTE: The VTR001 MAAP, VTR001 AAP, and VTR001 models differ in how they are

mounted (see Mounting on page 10).

1b

1b

VTR001 MAAP

2a

VTR001 AAP

RX

9VDC-12VDC

500mA

2a

RX

9VDC-12VDC

500mA

VTR001

2b

RX

9VDC-12VDC

500mA

1b

VTT001 and VTR001 User Guide • Installation 3