Extron Electronics RJ-45 User Manual

NETXA Male-Female RJ-45 Crossover Adapter

The Extron NETXA Male-Female RJ-45 Crossover Adapter is a 3" length of
Category (CAT) 6 cable that is terminated as a crossover cable with a male RJ-45
connector on one end and a female RJ-45 connector on the other end. Crossover
cables allow direct connection (non-network) between two IP enabled devices. With
a NETXA adapter, an installer can carry only patch (straight) cables of various
lengths for installation jobs and then use the adapter if necessary.

The total length of all Ethernet cables and adapters is limited to 328’ (100 m).

See the pin assignment drawing on the reverse side of this card.

Side View

Clip Down View

www.extron.com

Extron Electronics, USA

1230 South Lewis Street
Anaheim, CA 92805
USA

714.491.1500
Fax [phone]

Extron Electronics, Europe

Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax [phone]

Extron Electronics, Asia

135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax [phone]

Extron Electronics, Japan

Kyodo Building
16 Ichibancho
Chiyoda-ku, Tokyo 102-0082 Japan
+81.3.3511.7655
Fax [phone]

NETXA RJ-45 Crossover Adapter Pin Assignments

Clip DownSide

1Pins 2345678

1

2345678

RJ-45
connector

Male connector

Pin

1
2
3
4
5
6
7
8

Female connector

Wire color

White-orange
Orange
White-green
Blue
White-blue
Green
White-brown
Brown

68-1173-01

PinWire color

1White-green
2Green
3White-orange
4Blue
5White-blue
6Orange
7White-brown
8Brown

Rev. A

07 05

1&2

3&6 4&5

7&8

Twisted
Pairs