Extron Electronics Extron IR Sensor User Manual
Extron IR Sensor Installation Guide
Extron IR Sensor Installation Guide, cont’d
The Extron IR Sensor can be used as an accessory for the IRL 20 IR receiver
or the IR 102 Universal Remote Control Kit. The diagram below is a
reference for wire assignments during installation.
+5 VDC input
Demodulated IR signal
Ground ( , drain wire)
IR Sensor
The diagram on the other side of this card shows the maximum accepted
input signal angle and distance from an Extron IR remote control to the
IR Sensor.
www.extron.com
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
800.633.9876 714.491.1500
FAX 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort, The Netherlands
+800.3987.6673 +31.33.453.4040
FAX +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Rd. #04-01
PM Industrial Bldg., Singapore 368363
+800.7339.8766 +65.6383.4400
FAX +65.6383.4664
Extron Electronics, Japan
Kyodo Building, 16 Ichibancho
Chiyoda-ku, Tokyo 102-0082
Japan
+81.3.3511.7655 FAX +81.3.3511.7656
68-1037-01
Rev. D
05 07
21’ (6.4 m) max.
The IR Sensor has a 6-foot (1.8-meter)
cord. Do not extend the IR Sensor
cable beyond 21 feet (6.4 meters).
40 40
30’
max.
Extron
IR Remote
Control
IR Sensor
Loading...