Extron Electronics EMOTIA Jr. 800 User Manual
Specifications
Specifications
Compatibility ...................................... VGA and VESA signals up to
............................................. 800 x 600 resolutions (from 31-48 kHz)
Input ............................................. V GA male
Outputs ............................................. Video (RCA), S-VHS (4-pin mini-din) and
............................................. V GA female
Connectors......................................... RCA, 4-pin mini-din, 15-pin HD male
............................................. (input),15-pin HD female (local monitor
............................................. output)
Power supply
NTSC version.............................. 115 VAC, 60 Hz to 9 VDC/1A-wall mount
PAL version ................................. 230 VAC, 50 Hz to 9 VDC/1A-wall mount
Approvals ........................................... CE, UL, CUL pending
Dimensions ........................................ 1.6” H x 8” W x 5.9” D
............................................. 4.06 H x 23 W x 14.9 D cm
Weight ............................................. 4 lbs. (1.8 kg)
Warranty....................................... Two years, parts & labor
User’s Guide
FREEZE
EE
MOTIA MOTIA JJRR..
COMPUTER TO TV SCAN CONVERTER
FLICKER
CONTROL
800800ExtronExtron
POWER
EXTRON ELECTRONICS
1230 South Lewis Street
Anaheim, CA 92805
(714) 491-1500 FAX (714) 491-1517
SM
U.S.A.
EXTRON ELECTRONICS, EUROPE
Beeldschermweg 6C
3821 AH Amersfoort
+31-33-453-4040 FAX +31-33-453-4050
The Netherlands
EXTRON ELECTRONICS, ASIA
41B Kreta Ayer Road
Singapore 089003
+65-226-0015 FAX +65-226-0019
Singapore
79-05
68-296-01
Rev. B
ExtronExtron
POWER
COMPUTER
EMOTIA Jr. 800
(P/N 60-226-01 NTSC, 60-226-02 PAL)
INPUT
S-VIDEO
OUTPUT
MONITOR
VIDEO
UNDER
OVER
PICTURE
Scan Converter
Installation
FLICKER
CONTROL
PICTURE
S-VIDEO
Features
Extron’s EMOTIA JR. 800™ converts VGA sources (31.5 - 48 kHz)
with resolutions up to 800 x 600 into NTSC or PAL and S-Video
compatible outputs. The E
Simply connect it from the PC to the desired display (LCD
Projector, CRT Projector, consumer TV, VCR or compatible video
display).
Installation
1. Turn the PC and its monitor Off.
2. Connect the input cable’s (26-112-15) male end to the PC and the
female end to Emotia Jr. 800’s 15-pin HD, VGA Input connector.
3. Use the PC monitor’s cable to connect to Emotia Jr. 800’
Output.
4. Connect the desired output cable (S-VHS or RCA) to the input
connector of the display device.
5. Turn PC and PC monitor power On.
6. Plug the power supply into a service outlet and plug its cable to
Emotia Jr. 800’
7. Use Emotia Jr. 800’S and controls to center the image on the
screen.
8. Set the front panel “Underscan/Overscan” switch to select the
desired
image size.
Parts included with the
Emotia Jr. 800 are:
VGA (male-female) 6’
Input cable –26-112-15
(PC to Emotia Jr. 800)
MOTIA JR. 800 requires no software.
S connector marked “Power 9v, 1A”.
S VGA
Front Panel Features
FREEZE
Freeze - Press this button to capture a still image of a scan-
FREEZE
converted computer screen. The LED indicates when Freeze
mode is active.
Flicker Control Switch – 3 positions:
Up = Normal Mode
Mid-position = Flicker Reduction Mode
Down = Non-Interlaced Mode
Rear Panel Features
ExtronExtron
POWER
COMPUTER
S-Video - Use this output for devices that use S-Video or S-VHS.
This is the highest quality recordable video out of the E
800.
INPUT
S-VIDEO
OUTPUT
MONITOR
COMPUTER TO TV SCAN CONVERTER
FLICKER
CONTROL
UNDER
OVER
VIDEO
PICTURE
EE
MOTIA MOTIA JJRR..
POWER
800800ExtronExtron
MOTIA Jr.
Composite (RCA), 6’
Output cable –26-345-01
(Emotia Jr. 800 to Composite
Video device)
S-Video (S-VHS) , 6’
Output cable –26-316-02
(Emotia Jr. 800 to S-Video
device)
External Power Supply,
9 VDC –28-023-01
(Emotia Jr. 800 to AC power
source)
Tweaker (small screwdriver)
1
Extron • EMOTIA JR. 800 • User’s Guide
Video = NTSC or PAL (depending on version) - An RCA
connector provides either NTSC or PAL composite video.
VIDEO
Underscan/Overscan - This switch either underscans or
UNDER
overscans the displayed image on the screen. (Use this switch in
the underscan position when displaying text.)
OVER
Picture – These two controls are:
Vertical Center (
) (shifts the image up or down on the screen).
Horizontal Center (
Extron • EMOTIA JR. 800 • User’s Guide
) (shifts the image left or right on the screen).
2
Loading...