Extron electronic MVX-128 User Manual

Specifications — MVX 128 Plus Series

Video

Routing .......................................... 12 x 8 matrix

Gain ............................................... Unity

Bandwidth .................................... >300 MHz (-3 dB), fully loaded

0 - 10 MHz ................. no more than +0.1 dB to -0.1 dB

0 - 130 MHz ............... no more than +0.8 dB to -0.8 dB

Crosstalk ....................................... -80 dB @ 1 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz

Switching speed ........................... 200 ns (max.)

Video input

Number/signal type ................... 12 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, component video,

S-video, composite video

Connectors .................................... 12 female 15-pin HD

Nominal level ............................... 1 Vp-p for Y of component video and S-video, and for composite video

0.7 Vp-p for RGB and for R-Y and B-Y of component video

0.3 Vp-p for C of S-video

Minimum/maximum levels ...... Analog: 0.5 V to 2.0 Vp-p with no offset

Impedance .................................... 75 ohms

Return loss .................................... <-30 dB @ 5 MHz

DC offset (max. allowable) ......... 1.5 V

Video output

Number/signal type ................... 8 RGBHV, RGBS, RGsB, HDTV component video, component video, S-video,

composite video (follows input type)

Connectors .................................... 8 female 15-pin HD

Nominal level ............................... 1 Vp-p for Y of component video and S-video, and for composite video

0.7 Vp-p for RGB and for R-Y and B-Y of component video

0.3 Vp-p for C of S-video

Minimum/maximum levels ...... 0 V to 2.0 Vp-p (follows input)

Impedance .................................... 75 ohms

Return loss .................................... -30 dB @ 5 MHz

DC offset ....................................... ±5 mV with input at 0 offset

Switching type ............................. Triple-Action

™

1-2

Sync

Input type ..................................... RGBHV, RGBS, RGsB, RsGsBs

Output type .................................. RGBHV, RGBS, RGsB, RsGsBs (follows input)

Tri-level on Y, R-Y, B-Y channels (component video 720p, 1080i, 1080p)

Bi-level on Y channel (for all other component video rates)

Input level ..................................... 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal

Output level .................................. AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated

Input impedance .......................... 510 ohms

Output impedance ...................... 75 ohms

Max input voltage ....................... 5.0 Vp-p

Max. propagation delay.............. 30 ns

Max. rise/fall time ....................... 4 ns

Polarity .......................................... Positive or negative (follows input)

Audio

Routing .......................................... 12 x 8 stereo matrix

Gain ............................................... Unbalanced output: -6 dB; balanced output 0 dB

Frequency response ..................... 20 Hz to 20 kHz, ±0.05 dB

THD + Noise ................................ 0.03% @ 1 kHz at nominal level

Extron MVX 128 Plus Series Matrix Switchers • Specifications

S/N ................................................ >90 dB, balanced, at maximum output (21 dBu), unweighted

Crosstalk ....................................... <-80 dB @ 1 kHz, fully loaded

Stereo channel separation .......... >80 dB @ 1 kHz

CMRR ............................................ >75 dB @ 20 Hz to 20 kHz

Audio input

Number/signal type ................... 12 stereo, balanced/unbalanced

Connectors .................................... (12) 3.5 mm captive screw connectors, 5 pole

Impedance .................................... >10k ohm, balanced/unbalanced, DC coupled

Nominal level ............................... 0 dBV (316 mV)0 dBu (775 mV)

Maximum level ............................ +19.5 dBu, (balanced or unbalanced) at 0.01% THD+N

Input gain adjustment................. -18 dB to +24 dB, adjustable per input by RS-232/422, Ethernet, or front panel

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu

Audio output

Number/signal type ................... 8 stereo, balanced/unbalanced

Connectors .................................... (8) 3.5 mm captive screw connectors, 5 pole

Impedance .................................... 50 ohms unbalanced, 100 ohms balanced

Gain error ...................................... ±0.1 dB channel to channel

Maximum level (Hi-Z) ................ >+21 dBu, balanced or unbalanced at 0.10%THD+N

Maximum level (600 ohm) ......... >+15 dBm, balanced or unbalanced at 0.10%THD+N

Output volume range ................. 0 to 64 (-75.8 dB to 0 dB) in 1 dB increments from steps 1 to 64, 12 dB increment

from step 0 to 1

Control/remote — switcher

Serial control port ........................ 1 RS-232 or RS-422, 9-pin female D connector

Baud rate and protocol ............... 9600 (default), 19200, 38400, 115200 baud (adjustable); 8 data bits, 1 stop bit, no

parity

Serial control pin configurations RS-232: 2 = TX, 3 = RX, 5 = GND

RS-422: 2 = TX-, 3 = RX-, 5 = GND, 7 = RX+, 8 = Tx+

Ethernet control port ................... 1 RJ-45 female connector

Ethernet data rate ........................ 10/100Base-T, half/full duplex with autodetect

Ethernet protocol ......................... ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP

Program control ........................... Extron’s control/configuration program for Windows

Extron’s Simple Instruction Set (SIS™)

Microsoft

®

Internet Explorer, Telnet

®

General

Power ............................................. 100 VAC to 240 VAC, 50/60 Hz, 30 watts, internal

Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

Operating: +32 to +113 °F (0 to +45 °C) / 10% to 90%, noncondensing

Cooling .......................................... Convection, vented

Rack mount................................... Yes, with included brackets

Enclosure type .............................. Metal

Enclosure dimensions ................. 3.5" H x 19.0" W x 9.4" D (2U high, full rack wide)

8.9 cm H x 48.3 cm W x 23.9 cm D

(Depth excludes connectors. Width includes rack ears.)

Product weight ............................. 14.4 lbs (6.5 kg)

Shipping weight ........................... 21 lbs (10 kg)

DIM weight, international .......... 25 lbs (12 kg)

Vibration ....................................... ISTA 1A in carton (International Safe Transit Association)

Listings .......................................... UL, CUL

Compliances ................................. CE, FCC Class A, VCCI, AS/NZS, ICES

Extron MVX 128 Plus Series Matrix Switchers • Specifications

1-3