Extron electronic MLC 52 IR, MLC 52 RS User Manual

MLC 52
BASIC MLC - MEDIALINK™
CONTROLLER
Economical control for
classroom A / V systems
MediaLink
Universal display control
Discrete ON and OFF display power
controls
Configurable buttons
Backlit, easy-to-label buttons
IR learning, preconfigured display drivers, and IR beaming
Inactivity timer for display shutof f
Front panel security lockout
Includes black and white high-impact
plastic mounting faceplates
www.extron.com
Introduction
M L C 5 2
The Extron MLC 52 IR and MLC 52 RS Basic MediaLink Controllers are economical control panels ideally suited for classroom A/V systems. Each model comes with a black and white faceplate and offers IR control, while the MLC 52 RS also includes unidirectional RS-232 control. By providing easy input selection, power, and volume control, these controllers make classroom A/V operations simple.
Consistent Control in Every Room
Each MLC 52 controller acts as an extended remote control panel, providing user-friendly control for a display’s power, volume, and input selection. Because the MLC 52 IR and MLC 52 RS offer a central point of control for a display device’s key functions, they eliminate the need for the display’s IR remote control, making operations much more efficient. With the MLC 52 IR and MLC 52 RS, there are no misplaced remotes to search for, no confusing menus to navigate, and no dead batteries.
No matter what brand of display is installed in each presentation venue, the MLC 52 IR and MLC 52 RS MediaLink Controllers always provide a consistent control method from room to room. Presenters with little or no training can walk into any MediaLink equipped classroom and operate the A/V system with minimal effort.
Configurable Buttons for Flexible Control Options
No programming knowledge is necessary to install MLC 52 MediaLink Controllers. The four lower buttons on the MLC 52 IR and MLC 52 RS default to Volume Up, Volume Down, Select PC Input, and Select Video Input. Using the intuitive setup software provided, these buttons can be configured to send out any IR or RS-232 command supported by the display, making it easy to customize the controller to meet the needs of most single-display A/V systems. For example, three of the four buttons could be configured for input selection, with the fourth button dedicated to video mute or auto image.
Each button can store up to four separate commands, providing additional flexibility to meet the specific control requirements for most display devices. When a button is configured for Macro mode, all of the stored commands associated with that button are sent with a single button press. In Toggle mode, the button steps through a series of two, three, or four commands, issuing a single command with each press of the button.
Free Projector drivers
Extron creates and administers a wide selection of commonly used projector control drivers. These IR and serial RS-232 drivers allow MediaLink Controllers to communicate with a display device. They enable control of basic projector functions such as power, input selection, and volume adjustment. Go to the Extron Web site at www.extron.com to download drivers for the latest and most popular projectors.
Three Easy Ways to Configure
The MLC 52 IR and MLC 52 RS enable integrators to choose any of three methods when configuring the controllers. When used with the supplied Windows®-based configuration software, installation files can be saved and used to duplicate additional MLC 52 models. The files can also be archived for later use.
IR learning - Allows MLC 52 controllers to be set
up directly from the IR remote without the need for software and a PC.
IR beaming - Quickly and easily duplicates
complete configuration from one MLC 52 model to another without cables or software.
Extron’s easy-to-use configuration software -
Provides fast and simple setup via RS-232 when combined with one of many IR drivers available on the Extron Web site.
MLC 52 RS VC MediaLink Controller
Overview
M L C 5 2
Display ON/OFF
Clearly labeled buttons make it easy and convenient to turn the display on and off, eliminating the need for an external display remote
Volume Control
Provides up and down volume control of the display. If volume control is not required, or additional source switching is needed, these buttons can be configured for input selection or other commands
Optional Mount
An optional MLM 52 VC mounting kit can provide a separate volume knob to control Extron MPA – Mini Power Amp series amplifiers
Inactivity timer for display shut-off
Adjustable timer controls automatic shutdown to conserve energy, prevent plasma burn-in, or extend projector lamp life
MLC 52 Front Panel
Compact Size
One-gang design easily mounts in a wall or lectern
Backlit Buttons
Illuminated buttons can be custom­labeled with supplied label insert sheets for easy identification. These buttons are helpful for presenters in low-light environments
Multiple Memories
Each button can store up to four IR or serial RS-232 commands
Configuration Port
Allows for configuration of the MLC 52 via the front panel
Built-In IR Emitter/Receiver
Enables IR learning of commands from IR remote controls. Also provides IR beaming for controller-to-controller configuration without software
Status LEDs
Provide status of IR learning and configuration
Black and White
Includes black and white high impact plastic faceplates and mud ring mount brackets
IR Remote Control Input Port
Hardwired IR input for control with optional IR 402 and IRL 20 or IR Link
Serial RS-232 and IR Ports
Provides serial RS-232 and IR universal display control
MLC 52 Back Panel
MLC 52 Medialink Controller Models
M L C 5 2
MLC 52 IR
Basic MLC - MediaLink™ Controller with IR Display Control
Uni qU e Feat Ur eS
IR port for universal display control
One-gang faceplate
MLC 52 IR VC
Basic MLC - MediaLink Controller with IR and Volume Control
Uni qU e Feat Ur eS
IR port for universal display control
Integrated volume control knob with 10k potentiometer
controls MPA - Mini Power Amplifier
Two-gang faceplate
MLC 52 RS
Basic MLC - MediaLink Controller with IR and RS-232 Display Control
Uni qU e Feat Ur eS
IR and RS-232 ports for universal display control
One-gang faceplate
MLC 52 RS VC
Basic MLC - MediaLink Controller with IR, RS-232, and Volume Control
Uni qU e Feat Ur eS
IR and RS-232 ports for universal display control
Integrated volume control knob with 10k potentiometer
controls MPA - Mini Power Amplifier
Two-gang faceplate
Sheets of pre-printed button label inserts are included with every MediaLink Controller.
MLC 52 MOUNTING OPTIONS
MLC 52 Controller models can be mounted in a standard electrical box or the included mud rings, allowing the controller to be installed virtually anywhere,
including walls, lecterns, or tables. Additional mounting options include:
MLM 52 1GWP
One-gang wall mounting kit with metal faceplate, available in black or white.
MLM 52 L VC
Metal lectern mounting kit with an integrated volume control knob that allows for remote volume control of an Extron MPA Mini Power Amplifier. Available in black or white.
MLM 52 VC
Two-gang wall mounting kit with an integrated volume control knob that allows for remote volume control of an Extron MPA Mini Power Amplifier. Includes both black and white high-impact plastic mounting faceplates. Also available with black or white metal mounting faceplate.
Application Diagram
C
OM
1
L
A
N
U
I
D
#
0
9
3
0
1
2
0
5
2
P
O
W
E
R
1
2
V
.
5
A
MA
X
C
O
M
1
TX
R
X
T
X
R
X
C
O
M
2
C
OM
2
TCP/IP
Netwo rk
B
A
S
S
L
E
V
E
L
T
R
E
B
L
E
M
I
N
I
P
O
W
E
R
A
M
P
L
I
F
I
E
R
M
P
A
1
22
O
N
O
F
F
L
IM
IT
E
R
S
T
E
R
E
O
D
U
A
L
M
O
N
O
Ext ron WPB 103
VGA & Audi o Wall Plate
Lapto p w/ Audio
V
CR/DV D
Combo Pl ayer
Ext ron PMK 35 0
Pole Moun ting Ki t
Ext ron MPA 181T
Mini Power Ampli er (70V )
Audio Out put
MPA Volume Control
IR Projec tor Control
Projec tor
Etherne t
Help De sk
RS-232
Remote Monito ring, Schedu ling an d Contro l
Ext ron IPL T S2
Ethern et Cont rol Inter face Op tion
Ext ron MLC 52 IR V C
MediaL ink™ Cont rolle r w/ IR and Volu me Contr ol
IR
Ext ron PCM 24 0
Projec tor Dro p Ceilin g Mount O ption
Ext ron PMP
Projec tor Moun t Pole Opt ion
Ext ron UPB 25
Univer sal Pro jector Mounti ng Brac ket Optio n
Ext ron WPB 101
Compo site Vid eo & S-vi deo w/ Audio Wal l Plate
WP
B
1
0 1
S
­V I
D
E O
V I D
E O
L
R
W
PB
10
3
AU
D
I O
C
O
M
P UT
E
R
D
I S
P L
A Y
ML
C
52
D
V D
O
N
O
F F
P
C
A
UT
O I M
A
G
E
V CR
V
OL
U
ME
Ext ron SI 3CT L P
Full-R ange Ceilin g Speake rs - 1 Pai r Option
Ext ron SI 3CT L P
Full-R ange Ceilin g Speake rs - 1 Pai r
M L C 5 2
Extron Electronics, Europe
Beeldschermweg 6C, 3821 AH Amersfoort The Netherlands +800.3987.6673 +31.33.453.4040 FAX +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Rd. #04-01 PM Industrial Bldg. Singapore 368363 +65.6383.4400 FAX +65.6383.4664
Extron Electronics, Japan
Kyodo Building, 16 Ichibancho Chiyoda-ku, Tokyo 102-0082 Japan +81.3.3511.7655 FAX +81.3.3511.7656
Extron Electronics, USA
1230 South Lewis Street Anaheim, CA 92805
800.633.9876 714.491.1500 FAX 714.491.1517
specifications
Specifications
M L C 5 2
CONTROL/REMOTE — MLC CONTROLLER HOST PORTS
Serial control port ........................................... 1 front panel 2.5 mm mini stereo jack
(tip-ring-sleeve)
Baud rate and protocol ..................................... 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations ........................ Mini stereo jack: tip = TX, ring = RX,
sleeve = GND
Program control ............................................... Extron’s configuration program for Windows®
Extron’s Simple Instruction Set (SIS™)
CONTROL — PROJECTOR/PLASMA (MLC 52 RS)
Projector control port ....................................... (1) 3.5 mm direct insertion captive screw
connector, 6 pole for IR and 1-way RS 232
control (port is shared between power input and
IR and 1-way RS-232 projector control)
IR control ........................................................ TTL level (0 to 5 V) modulated infrared control from 30 kHz
up to 1 MHz
RS-232 control RS-232 control (1-way) ............ ±5 V
Baud rate and protocol (RS-232) ...................... 57600 to 1200 (9600 default) baud (configurable);
8 (default) or 7 data bits;
1 stop bit (±5 V); no parity (default), or even or odd parity
IR learning frequencies..................................... 30 kHz to 62 kHz
IR learning distance ......................................... 4" (10 cm) to 14" (36 cm) from the front panel
CONTROL — PROJECTOR/PLASMA (MLC 52 IR)
Projector control port ....................................... (1) 3.5 mm direct insertion captive screw connector,
6 pole for IR (port is shared with power input)
IR control ........................................................ TTL level (0 to 5 V) modulated infrared control from 30 kHz
up to 1 MHz
IR learning frequencies..................................... 30 kHz to 62 kHz
IR learning distance ......................................... 4" (10 cm) to 14" (36 cm) from the side panel
GENERAL (CONT.)
Model Version Description Part Number
MLC 52 IR IR Control - Black & White......................................................... 60-744-02
MLC 52 RS IR and RS-232 Control - Black & White ......................................
MLC 52 IR VC IR and Volume Control - Black & White ......................................
MLC 52 RS VC IR, RS-232, and Volume Control - Black & White ........................
Optional Accessories
CFG Cable 9 DB Female-2.5 mm TRS Config Cable - RS Version Only ......... 70-335-01
IPL TS 2 Two Serial Port IP Link Ethernet Control Interface .......................
IR Link Wall-Mountable IR Signal Repeater ............................................
IR Sensor Remote IR Receiver ..................................................................
MLM 52 VC Two-Gang Wall Mounting Kit with Volume Control - Black & White 70-527-02 MLM 52 VC Two-Gang Wall Mounting Kit with Volume Control - Black Metal .. MLM 52 VC Two-Gang Wall Mounting Kit with Volume Control - White Metal .. MLM 52 1GWP Metal One-Gang Wall Mounting Kit for the
MLC 52 Series - Black .............................................................
Included Accessories
12V, 1A
power supply 100-240VAC, 50/60Hz, to 12VDC,1A, wire ................................
MLC 52 Series
Button Labels Text and Icon Labels .................................................................
International Labels MediaLink International Faceplate Labels ...................................
IR Emitter and
Shield Kit IR Emitter Kits ..........................................................................
Plastic Mud Ring Black & White ..........................................................................
60-744-12 60-745-02 60-745-12
60-544-01 60-404-02 70-223-01
70-538-02 70-538-03
70-498-02
70-055-01
33-1262-01
33-1167-0X
70-283-01
70-519-X1
GENERAL
External power supply ...................................... 100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable;
Power input requirements ................................ 12 VDC, 0.15 A
Rack mount ..................................................... No, but wall- and furniture-mountable
Enclosure type ................................................ High-impact plastic or metal
Enclosure dimensions
MLC 52 faceplate ........................................ 4.5" H x 2.75" W x 0.13" D (11.4 cm H x
MLC 52 VC faceplate ................................... 4.5" H x 4.6" W x 0.1" D (11.4 cm H x
Device............................................................. 2.5" H x 1.6" W x 1.5" D (6.4 cm H x 4.1 cm W x
Product weight ................................................ 0.2 lbs (1 kg)
Shipping weight ............................................... 3 lbs (2 kg)
Vibration ........................................................ ISTA 1A in carton (International Safe Transit Association)
Listings ........................................................... UL, CUL
Compliances ................................................... CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF .............................................................. 30,000 hours
Warranty ........................................................ 3 years parts and labor
NOTE: All nominal levels are at ±10%
to 12 VDC, 1 A, regulated
7.0 cm W x 0.3 cm D) (1 gang)
11.7 cm W x 0.3 cm D) (2 gang)
3.8 cm D) (Depth excludes connectors and buttons.)
Specifications are subject to change without notice.
© 2007 Extron Electronics. All rights rese rved. All trademarks mentioned are the property of their re spective owners.
07-05 68-1439-01 REV. A
Loading...