Specifications — DVS 150 Digital Video Scaler
Video input
Number/signal type ................... 1 RGBHV, RGBS, RGsB pass-through,
1 component video (Y, R-Y, B-Y),
1 S-video,
1 composite video
Connectors .................................... 3 BNC female .......................... component video
1 4-pin mini-DIN female....... S-video
1 BNC female........................... composite video
1 15-pin HD female ............... RGB pass-through
Minimum/maximum levels ...... Analog ....... 0.0V to 1.0V p-p with no offset
Impedance .................................... 75 ohms
Vertical frequency ....................... 50 Hz to 60 Hz (does not apply to pass-through)
Video output
Number/signal type ................... 1 scaled RGBHV, RGBS, RGsB
1 scaled RGBHV or pass-through RGBHV/RGBS/RGsB
Connectors .................................... 6 BNC female
1 15-pin HD female
Minimum/maximum levels ...... 0.0V to 0.7V p-p
Impedance .................................... 75 ohms
Vertical frequency ....................... 56 Hz, 60 Hz, or 75 Hz
Scaled VGA resolution ............... 640x480, 800x600, 832x624, 848x480, 852x480, 1024x768, 1280x768, 1280x1024,
1360x765, HDTV 480p, 720p, and 1080p
Sync
Input type ..................................... RGBHV, RGBS, RGsB
Output type .................................. RGBHV, RGBS, RGsB
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Output level.................................. TTL ............. 5.0V p-p
Output impedance....................... 75 ohms
Polarity .......................................... Positive or negative (switch-selectable)
Control/remote — decoder/scaler
Serial control port ........................ RS-232, 9-pin female D connector
Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity
Pin configurations ....................... 1 = input 1 select
2 = TX
3 = RX
4 = input 2 select
5 = GND
6 = input 3 select
7 = input 4 select
Contact closure ............................ 9-pin female D connector (same as RS-232 connector)
Contact closure pin configuration . See pins 1, 4, 6, and 7 above.
Program control ........................... Extron’s control program for Windows®
Extron’s Simple Instruction Set™ – SIS™
General
Power............................................. 100VAC to 240VAC, 50/60 Hz, 30 watts, internal, auto-switchable
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
Rack mount................................... Yes, with optional rack shelf, part #60-190-01
Enclosure type .............................. Metal
Enclosure dimensions ................. 1.6" H x 8.75" W x 9.4" D (1U high, 1/2 rack width)
4.1 cm H x 22.2 cm W x 23.9 cm D
1-2 DVS 150 • Specifications
Product weight ............................. 3.3 lbs (1.5 kg)
Shipping weight ........................... 6 lbs (2.7 kg)
Vibration ....................................... ISTA/NSTA 1A in carton (International Safe Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A
Warranty ....................................... 3 years parts and labor
Specifications are subject to change without notice.
(7.31-110601-D1-112012)
1-3DVS 150 • Specifications