HAI 100 4K Plus • Setup Guide
BB
EE
CC
AA
DD
Do not tin the wi
Balanced Audio Input
Unbalanced Audio Input
No Ground Here
LR
AA
Output Cord
The Extron HAI 100 4K Plus is an audio embedder that embeds either two-channel analog audio, or two-channel or multi-channel
S/PDIF digital audio onto the HDMI output signal. The HAI 100 4K Plus includes an HDMI input, analog stereo audio and S/PDIF
audio inputs, as well as an HDMI output.
Mounting
The HAI 100 4K Plus can be placed on a desktop or tabletop using the included rubber feet, or mounted to a rack or furniture (see
the HAI 100 4K Plus User Guide, available at www.extron.com, for mounting options and instructions).
Cabling
Rear Panel Features and Cabling
POWER
12V
0.4A MAX
OUTPUT AUDIO INPUTSINPUT
Figure 1. HAI 100 4K Plus Rear Panel
Power input — Connect the provided power supply to the 3.5 mm, 2-pole captive
A
LR
S/PDIFANALOG
HAI 100 4K PLUS
Power input
A
HDMI input
B
HDMI output
C
Analog audio input
D
S/PDIF audio input (see the next page)
E
3/16"
(5 mm) Max.
Smooth
Ridges
screw power receptacle (see the image at right).
ATTENTION:
• Do not connect the power supply before reading the Attention in the
Power Supply section of the HAI 100 4K Plus User Guide.
• Ne branchez pas la source d’alimentation externes avant d’avoir lu les
mises en garde dans la section «PowerSupply» du HAI 100 4K Plus
User Guide.
HDMI input — Connect an HDMI input source into this female HDMI type A connector.
B
SECTION A–A
Power Supply
Captive Screw
Connector
NOTE: By default, the EDID stored at the HDMI input is set to 1080p at 60 Hz with 2-channel audio. EDID can be
congured using Extron PCS software (see Configuration on the next page).
HDMI output — Connect an HDMI output device into this female HDMI type A connector.
C
Analog audio input — Connect an analog audio device to this 5-pole 3.5 mm captive screw connector (see figure 2). This
D
connector accepts 2-channel stereo balanced or unbalanced audio.
NOTE: By default, the HAI 100 4K Plus is congured to always embed analog audio. This can be congured using
Extron PCS software or SIS commands (see Configuration on the next page).
Tip
Ring
Sleeves
res!
Figure 2. Analog Input Connector Wiring
ATTENTION:
Tip
Ring
LR
Sleeves
Tip
Tip
No Ground Here
• Connect the sleeve to the ground (Gnd) terminal. Connecting the sleeve to a negative (-) terminal will damage the
audio output circuits.
• Connectez le manchon à la terminaison terre (Gnd). Connecter le manchon à une terminaison négative (-)
endommagera les circuits de la sortie audio.
S/PDIF audio input — Connect a S/PDIF audio output device into this female RCA connector. This connector accepts
POWER
12V
0.4A MAX
OUTPUT AUDIO INPUTSINPUT
HAI 100 4K PLUS
LR
S/PDIFANALOG
BB
BB
EE
CC
AA
DD
E
digital S/PDIF audio formats (2-channel LPCM, Dolby Digital, or DTS).
NOTE: The HAI 100 4K Plus can be congured to embed S/PDIF audio using Extron PCS Software or SIS
commands (see “Conguration” below).
Front Panel Features and Cabling
IN OUT
SIGNAL
CONFIG
HDCP
HAI 100 4K PLUSE
AA
Figure 3. HAI 100 4K Plus Front Panel
Power LED — The LED indicator lights when the unit is receiving power.
A
Config port — Connect a control PC to this female Mini-B USB Cong port to update the rmware, congure various
B
CC
functions of the unit, and view the current status of the unit.
Input and Output LEDs — These four LEDs provide the status of the HDMI input and output:
C
• Signal — Input LED lights when the unit is receiving a signal on the HDMI input.
Output LED lights when a sink device is connected to the HDMI output.
• HDCP — Input LED lights when the input signal is HDCP encrypted.
Output LED lights when an HDCP compliant sink device is detected and the output is encrypted.
Configuration
Several HAI 100 4K Plus features can be congured using Extron PCS software or SIS commands:
• Extron Product Configuration Software (PCS): To congure the unit using PCS, download the software from
www.extron.com (see the HAI 100 4K Plus User Guide for details).
• Simple Instruction Set™ (SIS) commands: SIS commands can be sent from a PC to the HAI 100 4K Plus using Extron
DataViewer or other command interface (see the “SIS Commands” section of the HAI 100 4K Plus User Guide).
For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the
Extron Safety and Regulatory Compliance Guide on the Extron website.
© 2020 Extron Electronics — All rights reserved. www.extron.com
All trademarks mentioned are the property of their respective owners.
Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876
68-3110-50
Rev. A
03 20
Loading...