Extreme Networks 10301 User Manual
DATA SHEET
10G SFP+ Optic
The IEEE 802.3ae committee ratified
the 10 Gigabit Ethernet standard and
along with the general specification,
defined a number of fiber optic
interfaces. These standard interfaces
attempted to satisfy a number of
dierent objectives including support
for MMF and SMF compatibility.
SR SFP+
• 10GBASE-SR transceivers
are used in a data center to
interconnect two Ethernet
switches or to link an end-device
(e.g. 10 Gigabit Ethernet servers or
NAS device) to an Ethernet switch
LR SFP+
The SFP+ pluggable interface is an industry standard—Multisource
Agreement (MSA) for pluggable 10 Gigabit Ethernet Optics.
COPPER SFP+
SR SFP+ ZR SFP+LR SFP+
LR SFP+
• 10GBASE-LR transceivers are
most commonly deployed in interbuilding single mode connections
ER SFP+
• 10GBASE-ER transceivers are
most commonly deployed in
between sites or locations of
40 kilometers
ZR SFP+
• 10GBASE-ZR transceivers are
most commonly deployed in
between sites or locations of
80 kilometers
COPPER-CU SFP+
• 10GBASE-Copper cables are
most commonly deployed in data
centers between two devices in
the same rack (server to switch or
switch to switch)
Features
SR SFP+
• 10GBASE-SR transceiver support with a link length up to 300 meters over 850
nm multimode fiber, LC Connector
LR SFP+
• 10GBASE-LR transceiver support with a link length up to 10 kilometers over
1310 nm single mode fiber, LC Connector
ER SFP+
• 10GBASE-ER transceiver support with a link length up to 40 kilometers over
1550 nm single mode fiber, LC Connector
ZR SFP+
• 10GBASE-ZR transceiver support with a link length up to 80 kilometers over
1550 nm single mode fiber, LC Connector
COPPER SFP+
• 10GBASE-Copper CU is a direct attached passive twin-ax copper cable with
link lengths of 1m to 10m
10G SFP+ Optics – Data Sheet 1
Technical Specifications
SR SFP+ LR SFP+ ER SFP+ ZR SFP+ COPPER SFP+
Fiber Type Multimode (MMF) Single-mode (SMF) Single-mode (SMF) Single-mode (SMF) N/A
Connector Type LC LC LC LC Direct attach
Launch Power min (avg) -7.3dBm -8.2dBm -4.7dB -4.7dBm N/A
Receiver Power Range -1 ~ -9.9dBm 0.5 ~ -14.4dBm -1 ~ -15.8dBm -1 ~ -15.8dBm N/A
Optical Link Budget
Center Wavelength Range 840 to 860nm 1260 to 1355nm 1530 to 1565nm 1530 to 1565nm N/A
Distance Range 2m to 300m 2m to 10km 2m~40km 2m~80km 1m~10m
Mean Time Between Failure
(MTBF) Hours
Note: All Extreme Networks qualified SFP+ plugables meet or exceed the IEEE 802.3ae 10 Gigabit Ethernet specification. The table above shows some SFP+
parameters that may be useful for 10 Gigabit Ethernet deployments
*62.5 µm (160/200 MHz*km) = 1.6 dB (typically 26 meters)
62.5 µm (200 MHz*km) = 1.6 dB ) (typically 33 meters)
50 µm (400 MHz*km) = 1.7 dB ) (typically 66 meters)
50 µm (500 MHz*km) = 1.8 dB (typically 82 meters)
50 µm (2000 MHz*km) = 2.6 dB (typically 300 meters)
*Depends on fiber type.
See below.
4901960 3921568 1399188 1443343 1000000
7dB 10dB 10dB N /A
Physical Specifications
• Dimensions (HxWxD): 0.48x0.54x2.70 in
1.22x1.38x6.86 cm)
• Weight: 0.06 lb (25.1 g) unpackaged, 0.30 lb
(135 g) packaged
• Shipping box dimensions (HxWxD): 2.1x6.8x7.7 in
(5.4x17.2x19.6 cm)
TECHNICAL SPECIFICATIONS
SFP+ Optics are supported on:
• Summit® X650 Series – XGM2-2xf module
• VIM-10G8X
• Summit X450a/e – XGM2-2bt
• BlackDiamond 8800 series
ENVIRONMENTAL CONDITIONS OPERATIONAL
• Operating Temperature: 0° C to +40° C (32° F to 104° F)
• Operating Humidity: 10% to 93% non-condensing
• Altitude: 0 – 4000 meters (13,000 ft)
• Operational Shock: 30 m/s2 (3g), 11ms
• Operational Random Vibration: 5 – 500 Hz @ 1.5 Grms
TRANSPORTATION & STORAGE
• Temperature: -40° C to 70° C (-40° F to 158° F)
• Relative Humidity: 10% to 93%
• Shock: 180 m/s2 (18g), 6ms
• Random Vibration: 5 – 20 Hz @ 1.0 ASD w/-3dB/ oct. from
20 – 200 Hz
• Drop: 42” (105cm)
ENVIRONMENTAL STANDARDS
• EN 300 019-2-3 v2.1.2 (2003-04), Stationary Use, Class 3.1e
• EN 300 019-2-2 v2.1.2 (1999-09), Public Transportation,
Class 2.3
• EN 300 019-2-1 v2.1.2 (2000-09), Storage, Class 1.2
• RoHS 6 compliant
• China RoHS compliant
• WEEE Compliant
SAFETY COMPLIANCE
North American Safety of ITE
• UL60950:2000 3rd edition of later, Recognized Component
• cUL to CSA 22.2#60950:2000 3rd Ed or later,
Recognized Component
10G SFP+ Optics – Data Sheet 2
Loading...