Ordering Information:
MN25 ............Manual Ranging MiniTec® Digital MultiMeter
MN26T ..........Auto Ranging MiniTec® Digital MultiMeter
TP873 ............Spare Type K Bead Wire Temperature PRobe (-22 to 572°F/-30 to 300°C)
409992 ..........Vinyl Pouch Carrying Case
Specifications subject to change without notice.
Copyright © 2007-2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
1/13/12 - R1
Rugged pocket design with 8 to 11 Functions
Includes Relative zero, Data Hold and Range Hold
MiniTec® Digital MultiMeters
Specifications MN25 MN26T Basic Accuracy
(Manual Ranging) (Autoranging) (MN25/MN26T)
Display Count 2000 count 4000 count
DC Voltage 600V (0.1mV) 600V (0.1mV) ±0.5% ±1.0%
AC Voltage 600V (0.1V) 600V (0.1mV) ±1.5% ±1.5%
DC Current 10A (1μA) 10A (0.1μA) ±1.2% ±1.5%
AC Current 10A (1μA) 10A (0.1μA) ±1.8% ±1.8%
Resistance 2MΩ (0.1Ω) 40MΩ (0.1Ω) ±0.8% ±1.2%
Capacitance — 200μF (0.001nF) — ±3.5%
Frequency — 10MHz (0.001Hz) — ±1.5%
Temperature — 0 to 1400°F (1°) — ±3.0%
0 to 760°C (1°)
Duty Cycle — 0.1% to 99.9% (0.1%) ±1.2%
Diode/Continuity Yes Yes
Dimensions/ Wt 4.8x2.4x1.6" (122x61x40mm)/ 9.17oz (260g)
Test Leads included for easy measurements
• 4000 counts on large LCD with full function indication
• Measures AC/DC Voltage and Current,
Resistance, Capacitance, Frequency and Temperature
• Temperature measurements to 1400°F (760°C)
• Duty Cycle, Continuity and Diode test
• Autoranging with manual range override
• 10A fuse protection
• Overload protection and indication
• Auto power off saves battery life
• Includes protective rubber holster, general purpose bead wire
Type K temperature probe (Model MN26T), two 1.5V AAA
batteries and test leads
MN26T
MN25