Extech EX845 Data Sheet

Ordering Information:
EX845 ..................1000A AC/DC True RMS Clamp/DMM+IR Thermometer
EX845-NISTL*......EX845 with NIST Cert.
*NISTL is a Limited NIST: Product is certified to all functions except IR Thermometer
Features:
Built-in non-contact IR Thermometer design
with laser pointer
METERLiNK Wireless communication with FLIR Thermal
CAT IV safety rating for industrial applications
True RMS Current and Voltage measurements
Peak hold captures inrush currents and Transients
1.7" (43mm) jaw opening for conductors up to
750MCM or two 500MCM
4000 count backlit display
Autoranging with manual range button
Data Hold, Min/Max and Auto Power off
Complete with CAT IV test leads, 9V battery, Type K
probe, pouch case, and Professional Test Lead Set
CAT IV 1000A Clamp Meter + IR Thermometer
Bluetooth®Transmitter with METERLiNK
Wirelessly transmits Voltage and Current readings to your FLIR high-definition
infrared camera to incorporate meter readings with thermal images
Specifications subject to change without notice. Copyright © 2010 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
03/10/10 - R1
Specifications Range Basic Accuracy
AC/DC Current 0.1 to 1000A ±2.8% AC/DC Voltage 0.1mV to 1000V AC: ±1.5%; DC: ±2.8% Resistance 0.1 to 40MΩ ±1.5% Capacitance 0.001nF to 40,000μF ±3.0% Frequency 0.001kHz to 4kHz ±1.5%
IR Temperature -58 to 518ºF (-50 to 270ºC) ±2.0% rdg or ±4ºF/±2ºC
Type K Temperature -4 to 1400ºF (-20 to 760ºC) ±(3%rdg+9°F/5ºC) Continuity Yes Inrush Yes Diode Yes Dimensions/Weight 10.6x4.3x2" (270x110x50mm)/ 13.6oz (386g)
METERLiNK frees the Thermographer
from the manual process of
collecting field data
Infrared cameras quickly locate problems
with electrical equipment
Collecting current measurements and
associating them with the right component
identified on an infrared image, can be a
complicated and cumbersome process
Manual data collection results in unnecessary
complexity and risk. METERLiNK eliminates this problem by allowing the thermographer to quickly take a current reading on an electrical target and
associate those readings with the corresponding
targets stored in an infrared image
Patented Built-in IR Thermometer with laser pointer is an excellent troubleshooter for locating hot spots and overheating motors.
CAT IV -600V safety rating for added protection and True RMS feature gives you accurate readings of non-sinusoidal waveforms.
Professional Test Leads:
8-Piece Professional Test Lead set
Two 42" (1m) PVC lead extensions with shrouded banana
plugs at both ends
Two modular 4" (102mm) Heavy Duty test probe handles
with 0.16" (4mm) banana plug tip
Two standard size, alligator clips with insulated rubber boot
Two extra large, double-insulated, alligator clips with sharp
teeth for piercing insulated wire. Jaws open to 0.8" (20mm)
Patented
Patented
Loading...