Ordering Information:
EX840 ..................1000A AC/DC True RMS Clamp/DMM+IR Thermometer
EX840-NISTL*......1000A AC/DC True RMS Clamp/DMM+IR Thermometer w/NIST Cert.
*NISTL is a Limited NIST: Product is certified to all functions except IR Thermometer
EX840 CAT IV Clamp Meter Features:
• Patented built-in non-contact IR Thermometer design with
laser pointer
• True RMS Current and Voltage measurements
• Peak hold captures inrush currents and Transients
• MultiMeter functions include AC/DC Voltage, Resistance,
Capacitance, Frequency, Diode, and Continuity
• 1.7" (43mm) jaw opening for conductors up to 750MCM
or two 500MCM
• 4000 count backlit display
• Features include Data Hold and Min/Max and Auto Power off
• Autoranging with manual range button
• Complete with CAT IV test leads, 9V battery, Type K
probe (-22 to 572°F/-30 to 300°C), belt holster, and
TL808 Professional CAT III-1000V Test Lead Set
TL808 Professional Test Lead Features:
• 8-Piece Professional CAT III-1000V Test Leads
• Two 42" (1m) PVC lead extensions with shrouded
banana plugs at both ends, UL listed
• Two modular 4" (102mm) Heavy Duty test probe
handles with 0.16" (4mm) banana plug tip, UL listed
• Two standard size, alligator clips with insulated rubber boot
• Two extra large, double-insulated, alligator clips with sharp
teeth for piercing insulated wire. Jaws open to 0.8" (20mm)
CAT IV 1000A Clamp Meter + IR Thermometer
Industrial Clamp-on multimeter with CAT IV-600V safety rating
Ideal for industrial applications, this full-size True RMS 1000A AC/DC Clamp features a built-in
Infared Thermometer and rugged double molded housing.
Specifications subject to change without notice.
Copyright © 2009 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
6/23/09 - R1
Patented
Built-in IR Thermometer with
laser pointer is an excellent
troubleshooter for locating hot
spots and overheating motors.
CAT IV -600V safety rating for
added protection and True RMS
feature gives you accurate readings
of non-sinusoidal waveforms.
Includes:
Belt holster pouch to
store the meter,
temperature probe,
and test leads. The
additional 8pc set
Professional Test
Leads (TL808) are
packaged separately.
Specifications Range Basic Accuracy
AC Current 0.1 to 1000A ±2.8%
DC Current 0.1 to 1000A ±2.8%
AC Voltage 0.1mV to 1000V ±1.5%
DC Voltage 0.1mV to 1000V ±2.8%
Resistance 0.1 to 40MΩ ±1.5%
Capacitance 0.001nF to 40,000μF ±3.0%
Frequency 0.001kHz to 4kHz ±1.5%
IR Temperature -58 to 518ºF (-50 to 270ºC) ±2.0% rdg or ±4ºF/±2ºC
Type K Temperature -4 to 1400ºF (-20 to 760ºC) ±(3%rdg+9°F/5ºC)
Continuity Yes
Inrush Yes
Diode Yes
Dimensions 10.6x4.3x2" (270x110x50mm)
Weight 13.6oz (386g)