ETK35 Electrical Test Kit with
TRMS AC/DC Clamp Meter
This special value Electrical
Test Kit is assembled with
True RMS Meters to provide
all the electrical testing
needs for installation and
repair of electrical systems,
HVAC equipment, and large
appliances, plus AC/DC
Clamp Meter for automotive
and motor applications.
Kit Includes:
• EX205T True RMS Multimeter with Max Hold
• MA435T True RMS 400A AC/DC Clamp Meter with a
built-in Non-Contact Voltage Detector with LED alert
and Relative Mode
• 1.2" (30mm) jaw size for conductors up to 350MCM
• Data Hold and Auto Power Off
• Exceptional Value Kit is supplied with test leads,
Type K thermocouple bead wire probe, batteries, and
attractive storage case that provides protection and
organization for the meters and accessories
Specifications
AC Voltage 600V (0.1mV) True RMS 600V (0.1mV) True RMS
DC Voltage 600V (0.1mV) 600V (0.1mV)
AC Current 10.00A (0.1µA) True RMS 400A (0.01A)
DC Current 10.00A (0.1µA) 400A (0.01A)
Resistance 20MΩ (0.1Ω) 20MΩ (0.1Ω)
Frequency — 10kHz (0.01Hz)
Capacitance — 100µF (0.01nF)
Temperature — -4 to 1400°F/-20 to 760°C (0.1°)
Continuity / Diode Ye s Yes
EX205T Range (Max Resolution) MA435T Range (Max Resolution)
PRODUCT DATASHEETPRODUCT DATASHEET
Ordering
ETK35 ............... Electrical Test Kit with True RMS AC/DC Clamp Meter
Specifications subject to change without notice. Copyright © 2013 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.
Rev. 6/11/13
www.extech.com