Extech BR200, BR250 User Manual

USER MANUAL

Video Borescope
Wireless Inspection Camera

Models BR200, BR250, and KITS

Additional User Manual Translations available at www.extech.com

2 BR200-BR250-KITS_en-GB_v9.1 3/20

Introduction

Thank you for selecting the Extech Video Borescope Model BR200 (17mm camera), BR250 (9mm
camera), BR250-4 (4.5mm camera), or BR250-5 (5.2mm). Extech’s Video Borescope Inspection
Cameras provide a glare-free close-up field of view. They include a 3.5" color TFT LCD wireless
monitor that can be detached from the base and viewed from a remote location up to 10m (33
ft.) from the measurement point. Capture images and videos (with date/time stamp) on the SD
card and view them on the supplied Monitor, an alternate monitor (video out jack), or a PC (USB
connection). This device is ideal for home inspections (mold, insect infestation, electrical wire or
water pipe location), HVAC (inspect ducts, behind motors and compressors), and automotive
applications (view inside and around engines and transmissions). We ship these devices fully
tested and, with proper use, will provide years of reliable service.

Features

 17mm (BR200), 9mm (BR250), 4.5mm (BR250-4), or 5.2mm (BR250-5) diameter water-proof

(IP67) camera head with 1m (39") flexible cable

 Bright LED lamps on camera head with dimmer to illuminate viewed object
 Glare-free close-up field of view
 Detachable color TFT monitor wirelessly displays video remotely from the camera, to a

distance of 10m (33 ft.) maximum

 Micro SD memory card (included) stores images and video
 Captured video and still images with date/time stamp can be viewed on the supplied

wireless monitor, an additional monitor (via video out jack), or a PC (USB connection)

 Video and images can also be transferred to your PC via the micro SD card (included SD

adaptor)

 Menus in 10 languages: English, Chinese, German, French, Spanish, Portuguese, Italian,

Japanese, Dutch, and Russian

 Includes four (4) AA batteries for camera controller, rechargeable battery for monitor, micro

SD memory card with SD adaptor, USB cable, video connect cable, AC adaptor (100-240Vac,
50/60Hz, adapters for US, UK, EU, AUS), magnetic mount for monitor, and hard case. BR200
and BR250 also include hook, mirror, and magnet attachment accessories

3 BR200-BR250-KITS_en-GB_v9.1 3/20

Safety

 Do not expose instruments to moisture
 Turn power OFF when instruments are not in use
 Remove the batteries from the Camera controller when cleaning
 Replace all batteries at the same time

Supplied Equipment

1. Camera controller

2. Color TFT monitor

3. AC adaptor for monitor’s rechargeable battery

4. Video cable for connecting additional monitor

5. Accessories (magnet, hook, mirror) BR200/BR250 only

6. Magnetic mount for monitor

7. Flexible cable and camera head

8. Four (4) ‘AA’ batteries for Camera Controller

Note: Micro SD card and adaptor (not shown)

4 BR200-BR250-KITS_en-GB_v9.1 3/20

Description

1 Monitor mount (signal output)
2 Camera controller power indicator
3 Camera controller power ON/OFF switch and LED dimmer
4 Flexible cable
5 Camera head and LEDs
6 OK button
7 Up arrow and video/image button
8 Menu button
9 Down arrow button
10 Monitor power ON/OFF button
11 Monitor power indicator
12 USB jack for PC connection
13 Video output jack for alternate monitor
14 SD card slot
15 AC power adaptor jack
16 Reset button
17 Monitor mount (input signal)

5 BR200-BR250-KITS_en-GB_v9.1 3/20

Preparation for use

Camera controller power

Insert the four (4) ‘AA’ batteries (supplied) into the battery carrier located in the camera
controller’s handle as illustrated in accompanying diagrams. Observe correct polarity when

installing batteries.

Never dispose of used batteries or rechargeable batteries in household waste. As consumers, users are legally
required to take used batteries to appropriate collection sites, the retail store where the batteries were
purchased, or wherever batteries are sold.

Disposal: Do not dispose of this instrument in household waste. The user is obligated to take end-of-life devices
to a designated collection point for the disposal of electrical and electronic equipment.

Monitor power

The monitor uses a rechargeable battery. To charge the battery, plug the supplied AC adaptor
into an AC power source and then connect the other end of the adaptor cable to the power jack
on the monitor. The battery capacity icon on the monitor screen and the red LED power
indicator on the side of the monitor will blink while the battery is charging.

Connect the flexible cable to the camera controller

Align the flexible cable with the camera controller, noting the keyed pairing; and then tighten the
knurled collar to hold the connection firmly in place.

Warning: Damage to the flexible cable can occur if it is forcibly bent into too narrow a radius.