Extech AN400 Operating Manual

User's Guide
Cup Thermo-Anemometer Model AN400
Introduction
Congratulations on your purchase of the Extech Cup Thermo-Anemometer. The AN400 measures air velocity in five units of measure: feet per minute (ft/min), meters per second (m/sec), miles per hour (MPH), kilometers per hour (km/hr), & nautical miles per hour (knots). The low-friction cup vane freely rotates in response to air flow. An internal thermistor allows the AN400 to measure air temperature in Centigrade or Fahrenheit units. This meter is shipped fully tested and calibrated and with proper use will provide years of reliable service.
Meter Description
1. Cup vane
2. Temperature sensor
3. POWER: On/Off Logger: Store data with “REC” in display : Step through and recall stored data
4. HOLD: Freeze display Unit: Select measured units
5. REC: Enter Max/Min or Logger mode
oC/o
F: Select measured units
: Step through and recall stored data
6. LCD display
7. Battery compartment cap
2
AN400 V3.0 12/06
Loading...
+ 4 hidden pages