EXTECH AN100-NIST, AN200-NIST, AN200-NISTL DATA SHEET
CFM/CMM Thermo-Anemometer + IR Thermometer
Large display of Airflow or Air Velocity
Plus model with built-in InfraRed Thermometer
Features:
• Model AN100 — CFM/CMM Thermo-Anemometer
• Model AN200 — CFM/CMM Thermo- Anemometer
with built-in non-contact IR Thermometer measures
remote surface temperatures to 500°F (260°C) with an
8:1 distance-to-spot ratio and Laser Pointer
• Simultaneous display of Ambient Temperature and
Air Flow or Air Velocity
• Up to 8 easy to set Area dimensions (ft 2 or cm2) are
stored in the meter’s internal memory
• 20 point average function for Air Flow
• Super large LCD Backlit Display
• 3% velocity accuracy via low friction 2.83"D (72mm)
ball bearing vane wheel on 3.9ft (120cm) cable
• Data Hold and MIN/MAX
• Auto Power off
• Complete with vane sensor with 3.9ft (120cm) cable,
9V battery, protective rubber holster, and carrying case
Applications:
• HVAC installation, repair, diagnostics, and optimization.
• Fume hood testing, installation, and verification
• Ventilation system installation, servicing, and analysis
• Environmental wind and temperature testing/analysis
• Boiler rooms
• Ionizer flow output monitoring
• Automobile aerodynamic testing
• Plant/Facilities Maintenance
Patented
Specifications Range Resolution Basic Accuracy
Air Velocity 0.40 to 30.00 m/s 0.01 m/s ±3% m/s
Air Temperature 14 to 140˚F (-10 to 60˚C) 0.1˚F/˚C ±6.0˚F (3˚C)
InfraRed Temperature -58 to -4˚F (-50 to -20˚C) 0.1˚F/˚C ±9.0˚F (5.0˚C)
(AN200 Only) -4 to 500˚F (-20 to 260˚C) 1˚F/˚C ±2% reading or
AN100 and AN200 used in
HVAC applications measuring airflow
from heating vents.
Ordering Information:
Model AN200 features built-in
non-contact IR Thermometer to
measure surface temperature
that may be hard to reach
Airflow
AN100 0 to 9999 CMM (m
AN200 0 to 999,999 CMM (m
Dimensions/Weight 7 x 2.9 x 1.3" (178 x 74 x 33mm)/1.6lbs (700g)
AN100 ..........................CFM/CMM Thermo-Anemometer
AN100-NIST ................CFM/CMM Thermo-Anemometer with NIST Certificate
AN200 ..........................CFM/CMM Thermo-Anemometer + IR Thermometer
AN200-NIST ................CFM/CMM Thermo-Anemometer + IR Thermometer w/ Calibration Traceable to NIST
AN200-NISTL ..............Anemometer with Limited NIST
www.extech.com
Specifications subject to change without notice.
Copyright © 2007-2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
1.4 to 108.0 km/h 0.1 km/h ±3% km/h
80 to 5906 ft/min 1 ft/min ±3% ft/min
0.9 to 67.2 mph 0.1 mph ±3% mph
0.8 to 58.3 knots 0.1 knots ±3% knots
±2˚F (˚C)
whichever is greater
3
/min) 0.1
3
0 to 9999 CFM (ft
0 to 999,999 CFM (ft
/min) 0.1
3
/min) 0.1
3
/min) 0.1
3/04/11 - R1
Loading...