Excalibur Smart iCopter User Manual

Smart iCopter

User Guide

TM

2 3

Special Notice

y the helicopter without completely reading the manual
may cause injury to yourself and people in the vicinity, as well as damage to
the helicopter.

The Smart iCopter is not a toy! If misused, it can cause serious bodily harm and
damage to property. Fly only in open areas indoors following all instructions.

Keep items that can get entangled in the rotor blades away from the main and
tail blades, including loose clothing, pencils and screwdrivers. Especially keep
your hands away from the rotor blades.

y on

at hard surface for optimum sensor detection.

Additional Safety Precautions and Warnings

This model is controlled by a Bluetooth signal that is subject to interference
from many sources outside your control. This interference can cause
momentary loss of control so it is advisable to always keep a safe distance in
all directions around your model, as this margin will help to avoid collisions or
injury.

• Never operate your model with low battery or damaged / broken rotor blades.

• Always operate your model in an open area away from people.

• Keep all chemicals, small parts and anything electrical out of the reach of

children.

• Moisture causes damage to electronics . Avoid water exposure to all

cally designed and protected for this purpose.

• Never lick or place any portion of your model in your mouth as it could cause

serious injury or even death.

Note: These checklists are not intended to be a replacement for the
content included in this instruction manual . Although they can be used
as a quick start guide, we strongly suggest reading through this manual
completely before proceeding .

Smart iCopter™ is a Smart iOS Accessory for use with iPod touch®, iPhone® or

ying experience with user-friendly

controls and much more.

Introduction

and

hover automatically.

E-Land

One touch to land

automatically.

Accelerometer

Control using your iPod

touch, iPhone or iPad.

Bluetooth®

Bluetooth® enabled

helicopter with no

adapter required.

Trim

Re-calibrate your

Smart iCopter.

Altitude Slider

Adjustable slider for height

control.

4 5

Overview

ying the

traditional RC Control Copter but gave up?

The Smart iCopter features unique Easy-Fly and gyroscope technology for the

ight experience ever. Authentic, detailed styling adds

ying like a Pro.

The following accessories come together in the box when you purchase your
Smart iCopter:

Smart iCopter

2x Extra Main Rotor Blades

1x Extra Tail Rotor Blade

USB Charging Cable

User Manual

Battery Charging and Care

Please ensure that you have adequately

ying by using
the USB Cable included in your Smart iCopter
box. First, make sure the Smart iCopter is

. The ON/OFF switch is located
next to the Charging Socket on the bottom of
the Smart iCopter. Then, plug the USB Cable
into the Charging Socket. Plug the other
end of the USB Cable into your Mac, PC or a
5V charger to charge. If done properly, a red
light will appear on the front of your chopper.

This same light will turn blue once the chopper is fully charged and ready for

ight. At that point, disconnect the USB Cable from the chopper and from

your computer. PLEASE NOTE: Requires approximately 60 minutes charge

ight.

Warning: Lithium Ion or Lithium Polymer Rechargeable Battery
Inside (No Lithium Metal). Risk of explosion if battery is replaced
with an incorrect type. Don’t open or puncture the batterry, short

re, high temperatures, or water. Keep battery

out of reach of children.

cantly more volatile than the Alkaline, Ni-Cd or Ni-

MH batteries used in RC applications. All instructions and warnings must be

re, personal

injury, and/or property damage.

• By handling, charging or using the included Li-Po battery you assume

Long Lasting Satisfaction

ight time consideration,
the Smart iCopter comes with a built-in Lithium
Polymer (LiPo) Rechargeable Battery.

6 7

own entirely via Bluetooth with No

Additional Adapter required. The Smart iCopter has a built-in Class II Bluetooth

ight

radius of 33 feet (10 meters).

Note: This model is controlled by a Bluetooth signal that is subject to
interference from many sources outside your control. This interference can
cause momentary loss of control so it is advisable to always keep a safe
distance in all directions around your model, as this margin will help to avoid
collisions or injury.

Bluetooth Enabled RC Helicopter

all risks associated with lithium batteries. If you do not agree with these
conditions, return your complete Smart iCopter model in new, unused
condition to the place of purchase immediately.

• You must charge the included Li-Po battery in a safe area away from
ammable materials.

• Never charge the battery unattended. When charging the battery you should

always remain in constant observation to monitor the charging process and
react to potential problems that may occur.

ight, the battery must be cooled to ambient temperature

before charging .

• DO NOT USE A Ni-Cd or Ni-MH CHARGER. Failure to charge the battery with

re resulting in personal injury and/or

property damage.

Bluetooth Pairing

y your Smart
iCopter, please ensure that you pair via
Bluetooth.

Turn on your Smart iCopter. On your
Device, go to Settings > General

> Bluetooth > and switch it to the
“ON” position.

Once the Bluetooth locates the chopper
“Smart iCopter” will appear in the Devices

eld. If it shows as “Not Paired” simply
tap on the “Not Paired” to activate. If
done properly, it will read as “Connected”

Please note that Bluetooth uses a lot of
your iPod touch, iPhone or iPad battery

Bluetooth
when you are not using it to conserve
battery power.

Bluetooth Pairing

Pairing successful!

8 9

rst
time, you will be prompted to download the free Smart iCopter App. Tap Yes
to connect to the iTunes Store and download the App.

Alternatively you can download the Smart iCopter App manually through
the App Store or entering the following URL on your internet browser http://
itunes.apple.com/my/app/smart-icopter/id463689548?mt=8

Visit the App Store Download Launch & Enjoy!

Smart iCopter App Download

Understanding the App Menu

10 11

Play Mode

Easy-Fly Mode - One Touch Experience

When we designed the Smart iCopter series, we

ying an enjoyable fun-tastic

experience for you.

With the Easy-Fly feature, the Smart iCopter series

rst in the world to introduce the One Touch

ying this class of RC Copter.

Advanced Mode

In the Advanced Manual Control
mode, you will be able to further
take control of your Smart iCopter,
while retaining key Easy-Fly features.

Advanced Manual Control
mode tries to emulate the
feel of having to control Pitch,
Throttle and Rudder steering of a
helicopter with both hands.

Advanced Mode - Horizontal view

Smart iCopter App Quick Guide

Battery

Battery indicator.

Controls

Multi-directional

JoyPad.

Search Light

Turns on front

headlights.

Altitude

Adjustable slider.

Trim

Corrects drifts or erratic rotation.

Move the trim sliders in the

opposite direction of drift.

Height Indicator

Displays current

height.

Ignition

Press and hold for 2

seconds until main

rotor rotates.

Nav. Lights

Turns on the

blinking lights.

Bluetooth

Indicator lights up

when connection is

established.

Accelerometer

Activates Motion Control Mode

where your device becomes

the controller. Icon will light

up when triggered.

/ E-Land

/ land and

auto hover at 3.9 feet

(1.2 meters). Press again

to land.

Settings

Goes to Settings page.

Exit

Back to main page.

Hover

Hovers Smart iCopter at

3.2 feet (1.0 meters).

(Applicable only in

Advanced Mode)

12 13

Drive Mode

The Smart iCopter comes with the ability to be driven on the ground. Use the
Drive Mode to familiarize yourself on directional controls of the Smart iCopter
before taking to the air.

. In Easy-Fly
mode, the height is preset between 2.6 - 3.9
feet (0.8 - 1.2 meter). Press Land button to
land your Smart iCopter.

...

Once you are comfortable with the directional controls, with a single touch of

and Auto Hover” feature, launch your Smart

iCopter into the air.

Press and hold “Ignition” button until rotor
blades start to turn. Use the directional
control to Drive your Smart iCopter on
the ground. Use Altitude slider to increase
power during drive mode. Press and hold
Engine Stop to stop.

Only drive the Smart iCopter on

at solid surface. Wheels may

oor or

balanced.

at solid

ight. Soft
or carpeted surface may interfere
with height sensor signal.

please note that your Smart

iCopter will tilt in unexpected direction due

ects or outside
interference, compensate by gently pulling
the controls in the opposite direction.

dnaL

Ignition

Engine Stop

Easy-Fly; One-Touch Simplicity Flying

ying traditional RC helicopters know it is a

challenge and the learning curve is usually a painful and frustrating process.

With our proprietary and Patent Pending
Easy-Fly features, you can now enjoy instant

ying experience with our One Touch

ying.

Altitude Slider

In-Flight Adjustable slider

In Easy-Fly mode, the height is preset between

2.6 - 3.9 feet (0.8 - 1.2 meter) for optimum sensor
detection

Please note that your Smart iCopter uses on
board sound sensor to detect surface to height

ying over table or other furniture,

and it will auto correct its altitude accordingly.

Trim (Rudder)

Should your helicopter begin to drift in a
certain direction or spin erratically, you will
need to adjust your trim to regain control.
In order to trim your chopper, move the
Trim Dial in the opposite direction that your
helicopter is drifting/spinning.

14 15

Easy-Fly Auto Call Assist

The Easy-Fly feature comes with an Auto
Call Assist which is applicable for iPhone
users only.

The Easy-Fly Auto Call Assist will
activate when you receive an

ying your Smart

iCopter. The Smart iCopter will auto

so that you can
receive your call without having to
bother about your Smart iCopter

unattended.

Easy One-Gesture Landing

Mayday! Mayday!

Easy One-Gesture Landing allows you to land and

ipping your
controller Device faceside down without needing
you to press any button.

Please ensure that the Orientation Lock on your

for this feature to work.

16 17

Settings Menu

Unit Measurement Settings

Choose between the Metric or
Imperial system to monitor your
Altitude.

Accelerometer

Toggle your
Accelerometer mode to

”

automatically.

Sensitivity

Controls the sensitivity
of the controller in
Accelerometer mode.

ects

Toggle in-App

ects

ight.

Orientation

Toggle to switch main
controls for Left or Right
handed use.

Navigation Light

Turns on the blinking lights located on
both sides of the Smart iCopter.

Battery Indicator

Indicator shows the status of the battery
for your Smart iCopter.

Auxiliary Controls

Search Light

Activates lights located on the front
of the Smart iCopter, to perform like
search lights.

18 19

Help Menu

In-App User
Manual

Please read
thoroughly
before
attempting to

y the Smart

iCopter.

Safety Guidelines

Failure to follow these safety instructions could result

re, electric shock, or other injury or damage to

your Easy-Fly Smart iCopter or other property.

Troubleshoot

A quick guide to solving your
problems.

About Us

Safety Guidelines

The Smart iCopter is NOT a TOY and only suitable for INDOOR use.

WARNING: Suitable for Ages 14 and up. This product may contain small

parts which may pose as a choking hazard to children.

y your Smart iCopter,
and make sure you are always conscious of your own personal safety and the
safety of others. Be conscious of your surroundings and environment when
operating the Smart iCopter.

y under following conditions

• In an area that has wind drafts. The Smart iCopter is STRICTLY for indoor

ying only. Common household items such as Fan, Air Conditioner or

ying conditions.

• If model feels hot due to overheated rotor motor from prolonged

ying.

• If model has been in contact with rain, moisture, or contaminants.

• In cold climate conditions - plastics are very susceptible to damage due to

cold climates. Optimum operating temperature is between 20˚- 45˚C.

re or high heat - plastics and electronics

components are very susceptible to damage or deformation due to heat.

• In crowded areas of the home. Avoid operating your model in the street

where injury or damage can occur. Never operate the model out on the
street or in populated areas for any reason.

• Near roads, railways, or power lines.

uence of drugs or alcohol.

• If beginner or individual(s) planning to operate a borrowed helicopter

unfamiliar with model or safety instructions.

20 21

Inspect All Parts

ight, check for damaged parts and verify all parts are operating

normally with all functions in order.

y if blades are damaged.

ect the

ight of the helicopter.

• Verify battery on board helicopter and your iPod touch, iPhone or iPad to
cient level of charge.

• Verify there is no introduction or exposure to water or moisture in any form.

During operation of helicopter

• Always be aware of your surroundings. DO NOT ALLOW Children to operate

the Smart iCopter without Adult Supervision.

• Maintain safe distances from aircraft and rotating main/tail rotor blades.

Recommended safe distance is 10 feet (3 meter).

• Always be conscious of your actions.

• Wear appropriate clothing that does not interfere with your iPod touch,

iPhone or iPad or Smart iCopter.

• Never leave your model unattended. Carefully follow all

directions and warnings.

• Maintain eye contact with your Smart iCopter during all aspects of operation.

Safety Guidelines

Troubleshooting

General Issues

y

my Smart iCopter.

• Press and hold Ignition button for 2-3 seconds and a sound will indicate
there is Ignition.

y my Smart iCopter.

• Please ensure that the power button is turned on at your Smart iCopter.

button.

• Please ensure that the Bluetooth icon is lighted up to indicate that your iPod
touch, iPhone or iPad is paired with your Smart iCopter.

but seems erratic and is having

.

at and hard surface as the sensors
may have trouble detecting height and will cause your Smart iCopter to
perform erratically.

Unable to connect Bluetooth.

• Please ensure that only ONE of your iPod touch, iPhone or iPad is connected
to your Smart iCopter.

le on your iPod touch, iPhone or iPad Bluetooth
connection in Settings > General > Bluetooth > Tap blue arrow icon > tap
“Forget this Device” and re-pair.

The Smart iCopter seems to be drifting a lot or rotates without being
controlled.

• Please re-calibrate your Smart iCopter by using the Trim function on the App.
Dial the Trim button to the opposite side of the drift or rotation.

ying 2 or more Smart iCopter in the same airspace, please

pair one at a time.

22 23

Troubleshooting

App Issues
My Smart iCopter App doesn’t seem to be launching after I download it

from the App Store.

• Delete the App completely from your iPod touch, iPhone or iPad and from
your iTunes and re-download the App.

My Smart iCopter seems to be out of control or the controls are not
responsive in the App.

your Smart iCopter and completely exit your App by double
clicking your Home Button > click and hold Smart iCopter App till it jiggles >
press the minus button > restart the App > turn on your Smart iCopter and
play again.

If you recently restored the software on your iPod touch, iPhone or iPad,
you will need to re-download your Smart iCopter App.

Battery Issues
The battery won’t charge

• Please ensure that you correctly connected the charger to your Smart iCopter.

• If you are charging from your keyboard, please ensure it has a
high-powered USB 2.0 port.

The battery loses charge fast.

• Please ensure that you give the battery a complete charge before use.

the power on your Smart iCopter

when not in use.

The Smart iCopter rotors are rotating erratically and the unit is

but unable to.

• Low in power, please recharge your Smart iCopter.

Disclaimer and Copyright Notice

This equipment complies with Part 15 of FCC RF Rules. Operation is subject to
the following two conditions:

1) This device may not cause interference and 2) This device must
accept any interference, including interference that may cause
undesired operation of the device.

The d-Red, Smart iCopter™ and Easy-Fly™ word mark and logo are trademarks
of d-Red™ Technologies Ltd., registered in Hong Kong, China and U.S. Patent

ying.

Apple®, iPad®, iPhone®, iPod® and iPod touch® are trademarks of Apple Inc.,

registered in the U.S. and other countries.

The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc., and any use of such marks by d-Red™ Technologies

Limited is under license.

©2012 EB Brands

Distributed by EB Brands

Hazleton, PA 18202

www.goexrc.com

[e-mail]

Distributed in the United Kingdom by:

EB Brands UK, Worcester WR4 9FA

© 2012 EB Brands

er slightly from photograph.

XC9847IS01EXC

FCC Part 15 Compliance

cations not expressly approved by the party responsible for compliance could void
the user’s authority to
operate the product.”
AND

2. “NOTE: This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This
product generates uses and can radiate radio frequency energy and, if not installed and used in ac­cordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interfer­ence will not occur in a
particular installation. If the product does cause harmful interference to radio or television reception,
which can be determined by

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the product and receiver.

erent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Product replacement policy only covers normal wear and tear when the prod­uct is used as directed. Normal wear and tear does not include damage caused
by crashes, collisions, or any use other than directed.