Before Putting Into Use
•Before connecting the appliance to the power supply, let it stand for about 2 hours, which will reduce a possibility of malfunctions in the cooling system due to transport handling.
•Clean the appliance, and be thorough, especially in the interior (See Cleaning and Maintenance).
•In case the interior accessories are not correctly placed, rearrange them as described in chapter “NAME OF THE PARTS”.
Instructions for Use
These instruction for use are intended for the user. They describe the appliance and its correct and safe use. They were prepared for various types/modes of refrigerators therefore you may find in it description of some functions and accesories that your appliance does not have.
Tips for Energy Savings
•Try not to open the door too often, especially when the weather is wet and hot. Once you open the door, mind to close it as soon as possible.
•Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance).
•Set thermostat from higher to lower settings as soon as possible (depends on how loaded the appliance is ambient temperature etc).
•Before loading the appliance with packages of fresh foods, make sure they are cooled to ambient temperature.
Important
•If you have bought this appliance to replace an old one equipped with a lock that cannot be opened from inside (lock, bolt), make sure that the lock is broken. This will make it impossible for children to lock themselves inside the appliance and suffocate.
•The appliance must be correctly connected to the power supply. (See: How to install)
•Do not touch the cooled surfaces while the appliance operates, especially not with wet hands, because the skin may stick to the cold surfaces.
•Do not freeze bottles containing liquid, especially not soft drinks, such as mineral water, sparkling wine, beer, cola etc., because liquid expands during freezing and the glass bottle is very likely to blow up.
•Do not eat frozen food (bread, fruit, vegetables), because you can get frostbites.
•If the food has strange smell or color, throw it away, because it is very likely that it is spoiled and therefore dangerous to eat.
•Disconnect the appliance from the power supply before repairing it (only a qualified technician should repair it), before cleaning.
•Do not defrost the appliance with other electric devices (hair dryer etc.) and never scrape the ice or frost layer with sharp tools.
•The rating plate is inside the appliance or outside on the rear wall.
1 |
2 |
NAMES OF THE PARTS
! |
2 |
|
|
||
@ |
|
|
# |
3 |
|
$ |
||
|
||
% |
5 |
|
^ |
||
4 |
||
|
||
& |
6 |
|
* |
|
|
( |
7 |
|
|
||
) |
|
|
1 |
8 |
|
|
|
!ICE TRAY |
1VEGETABLE CASE |
|
|
@F SHELF (MOVABLE) |
2FREEZER POCKET(SMALL) |
|
|
#FREEZER TEMPERATURE |
3FREEZER |
|
|
CONTROL KNOB |
POCKET(MIDDLE) |
|
|
$ICE BOX |
4EGG CASE |
|
|
%CHILLED CASE DOOR |
5UTILITY |
|
|
^CHILLED CASE |
POCKET(SMALL/SMALL) |
|
|
&REFRIGERATOR |
6UTILITY |
|
|
TEMPERATURE |
POCKET(SMALL/MIDDLE) |
|
|
CONTROL SWITCH |
7BOTTLE |
|
|
*R SHELF (MOVABLE) |
POCKET(LARGE/LARGE) |
|
|
(LAMP COVER |
8BOTTLE |
|
|
)VEGETABLE CASE COVER |
POCKET(MIDDLE/LARGE) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
HOW TO OPERATE
Starting your new Refrigerator
1.Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth, the interior with a clean moist cloth.
2.Insert the power supply cord into the socket.
Temperature control
Freezer Temperature Control |
Refrigerator Temperature Control |
|
|||
|
|
|
|
|
|
|
TEMP. CONTROL |
WINTER |
|
|
|
MIN |
MED |
MAX WINTER |
MAX |
|
|
|
|
|
MED |
MIN |
|
|
|
|
TEMP. CONTROL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MIN |
|
When ambient Temp. is below 15˚C or 59 ˚F |
|
|
|
|
|
|
|
|
|
MED |
|
When ambient Temp. is between 15-25˚C or 59-77˚F |
|
||
MAX |
|
When ambient Temp. is above 25˚C or 77˚F |
|
|
|
WINTER |
|
If ambient temperature is below 10˚C or 50˚F |
|
|
|
|
|
|
|
|
|
•To control the internal temperature, adjust the control dial according to the ambient temperature or purpose of use.
•The first time you turn the unit on, set the temperature control to “MAX”.
•The range of the temperature control is from position “MIN” the warmest to “WINTER” the coldest. After 24 to 48 hours, adjust the temperature control to the setting that best suits your needs. The setting of “MED” should be correct for home or office refrigerator use.
“Winter” Position: Select the “WINTER” Position when the temperature in the area where the appliance is located is colder than 10˚C or 50˚F. This enables the freezer section to operate properly.
NOTE: Wait 3-5 minutes before restarting if you unplug the refrigerator. The unit may fail to operate properly if restarted too quickly.
Defrosting
You will never have to defrost your refrigerator as it is designed to do it automatically. The defrosted water drains into the evaporator tray located in the backside.
4
Loading...