Evolution 355mm (14”) TCT Multipurpose Saw, Rage2, RAGE23551, RAGE23552, RAGE23552E Instruction Manual
355mm (14”) TCT Multipurpose Saw
Instruction
Manual
Read instructions before operating this tool.
www.evolutionbuild.com
www.evolutionbuild.com
2
We, Evolution Power Tools Limited, Venture One,
Longacre Close, Sheffield, S20 3FR as the supplier of the
product listed below:
RAGE2 355mm TCT Multipurpose Cut-Off Saw
Part Number RAGE23551/RAGE23552/RAGE23552EU
Voltage 110/230v
Power 2000W
Declare, under our sole responsibility that the equipment
to which this document relates, is in conformity with the
following standards or other normative documents:
EN60335-1: 1994+A1+A2+A11-A16
EN55014-1: 2000+A1+A2
EN55014-2: 1997+A1
EN61000-3-2: 2000
EN61000-3-3: 1995+A1
EN61000-3-11: 2000
EN60745-1/A1:2003
EN60745-2-5:2003
And thereby conforms to the protection requirements
of Council Directive 73/23/EEC amended by 93/68/EEC
relating to the Low Voltage Directive, Council Directive
98/37/EEC relating to the Machine Directive and Council
Directive 89/336/EEC relating to the EMC Directive, and is
compliant with Council Directive 2002/95/EC in relation to the
Restriction of Hazardous Substances in electrical & electronic
equipment (RoHS). EU Directive 2002/95/EC restricts the use
of the 6 substances below in the manufacture of specific
types of electrical equipment. Whilst this restriction does not
legally apply to components, it is recognized that component
‘compliance’ is relevant to many customers.
Evolution Power Tools definition of RoHS Compliance:
• The product does not contain any restricted substances in
concentrations and applications banned by the directive and
for components, the product is capable of being worked at
the higher temperatures required by lead-free soldering.
• The restricted substances and maximum allowed
concentrations in homogenous materials are, by weight:
Lead – 0.1%
Mercury – 0.1%
PBB (Polybrominated Biphenyis) – 0.1%
PBDE (Polybrominated Diphenyl Ethers) – 0.1%
Hexavalent Chromium – 0.1%
Cadmium – 0.01%
Level of Sound pressure according to
86/188/EEC, 98/37/EEC & 2000/14/EC
Guaranteed Sound Power Level 112.4 dB(A)
All Relevant technical documentation is held at Evolution
Power Tools Ltd, Shefeld, United Kingdom.
Authorised By
Mr Matthew J Gavins
Managing Director
30th March 2008
EC - DECLARATION OF CONFORMITY
www.evolutionbuild.com
3
Please read these operating and safety instructions
carefully and completely. For your own safety, before
using this equipment check that the voltage is correct
and that all handles and parts are firmly secured. If you
are uncertain about any aspect of using this equipment
contact your distributor.
Please Keep These Instructions
Model RAGE2 Specifications
Motor (230v or 115v ~ 50/60 Hz) (Watts) 2000
RPM No Load (Speed 1) (min-1) 1450
Recommended Maximum Duty Cycle (Minutes) 30
Sound Power Level (Under Load) (dB(A)) 112.4
Vibration Level (No Load) (ms2) 1.39
Weight (Kg) 25.1
Max Dimensions (Raised) (mm) H 620 W 315 D 640
Maximum Box Cut Capacity 90°
Square (mm) 120 x 120
Rectangle (mm) 95 x 180
Round (mm) 130
Wood (mm) 125 x 175
Maximum Box Cut Capacity 45°
Square (mm) 89 x 89
Rectangle (mm) 78 x 110
Round (mm) 105
Wood (mm) 125 x 125
Blade Dimensions
Maximum Diameter (mm) 355
Bore Diameter (mm) 25.4
Thickness (mm) 2.4
Standard Equipment Supplied With Unit
1 8mm Hex Wrench, 1 Safety Goggles, 1 Instructions.
Ear and eye protection MUST be worn whilst operating this
equipment. Do NOT touch the blade whilst it is in motion.
Always follow the Personal Protection Equipment (PPE)
recommendations whilst operating this tool.
This machine is designed specically for cutting steel
& other materials using the appropriate TCT (Tungsten
Carbide Tipped) blades. It should NOT be modied and /
or used for any application other than for which it was
intended, including powering other equipment.
OPERATING INSTRUCTIONS
UK
UK
Loading...