EVOLIS 0010 Users Manual
EQUIPMENT FCC ID : ZFX0010
Canada IC : 9609A-0010
Exhibit 8
Notice
Page : 1/5
Written by : O. ROY 2 January 2013 Test report # : 099130-CC-1-a
Contains
Contient
FCC ID: ZFX0010
IC: 9609A-0010
Name:
Model:
Zenius
Type:
P/N:
ZN1U0000RS
S/N:
10000194536
DC Input:
24V 3A
Contains
Contient
FCC ID: ZFX0010
IC: 9609A-0010
Only use power supply provided with the printer
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
(2) this device must accept any interference received,
Including interference that may cause undesired operation.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
This Class B digital apparatus complies with Canadian ICES-003.
Evolis Card Printer
Made in France
1. Instruction for use
Information required on the printer label
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference
(2) this device must accept any interference received,
Including interference that may cause undesired operation.
Example:
EQUIPMENT FCC ID : ZFX0010
Canada IC : 9609A-0010
Exhibit 8
Notice
Page : 2/5
Written by : O. ROY 2 January 2013 Test report # : 099130-CC-1-a
Information required on the printer user guide
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the radio or television.
- Connect the equipment to a circuit other than that to which the receiver is connected.
- Consult the supplier or an experienced radio/TV technician.
Use of a shielded twisted pair cable is necessary to comply with the restrictions laid down by part 15 of the FCC Rules for
Class B digital devices.
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications made to this equipment without the express, written
consent of Evolis Card Printer may cause harmful interference and void the FCC authorization to operate this equipment.
It is recommended to respect a distance of 20 cm between user and RFID module when the module is powered.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this devicemust accept any interference, including interference
that may cause undesired operation of the device.
Loading...