Evo Fitness FX4M User Manual
USER’S MANUAL
FX4 MOTORIZED TREADMILL
MODEL NUMBER: FX4M
USER WEIGHT LIMITATION: 350lbs.
TOLL FREE CUSTOMER SERVICE NUMBER: 1.888.800.1167
SERIAL NUMBER (found on frame):
2
FX4M MOTORIZED TREADMILL
PRECAUTIONS
For future service or related questions:
Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth
Fitness treadmill.
Name: ______________________________ Phone Number: ___________________ Receipt: ______________________
Precautions:
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and
information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are
adequately informed of all warnings and precautions.
?? Use the treadmill only as described in this manual.
?? Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that
blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
?? When choosing a location for the treadmill make sure that the location and position permit access to a plug.
?? Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or
near water.
?? Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
?? Keep children under the age of 12 and pets away from the treadmill at all times.
?? The treadmill should not be used by persons weighing more than 350lbs.
?? Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using the
treadmill. Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are
recommended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.
?? When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on the
same circuit.
?? Always straddle the belt and allow it to start moving before stepping onto the belt.
?? Always examine your treadmill before using to ensure all parts are in working order.
?? Allow the belt to fully stop before dismounting.
?? Never insert any object or body parts into any opening.
?? Follow the safety information in regards to plugging in your treadmill.
?? Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill. Do not
operate the treadmill with a damaged or frayed power cord.
?? Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by
an authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follow
these instructions will void the treadmill warranty.
?? Never leave the treadmill unattended while it is running.
Visit us at: www.evofitness.com
3
FX4M MOTORIZED TREADMILL
POWER REQUIREMENTS
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN
ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO
WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE
PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges
and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the
possibility of treadmill damage, always use a surge protector (not included) with your treadmill.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector
with a UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less
and an electrical rating 120VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for
electric current, should the treadmill malfunction. This treadmill comes with an electrical cord having an equipment-grounding
conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in the
drawing below.
Visit us at: www.evofitness.com
4
FX4M MOTORIZED TREADMILL
PREASSEMBLY
Open the boxes:
You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the
boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be
assembled properly. If you are missing any parts or have any assembly questions call your local Smooth Retailer.
Gather your tools:
Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require to
assemble the unit properly. Having all of the necessary equipment at hand will save time and make the assembly quick and
hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is free
from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a comfortable
amount of free area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another person
when assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 350lbs. it is not recommended that
you use this product. Serious injury may occur if the user’s weight exceeds the limit shown here. This product is not
intended to support users whose weight exceeds this limit.
Visit us at: www.evofitness.com
5
FX4M MOTORIZED TREADMILL
HARDWARE COMPARISON CHART
Hardware chart:
For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help
you identify those items that may be unfamiliar to you.
NO. DESCRIPTION QTY.
Safety Key
2
1
4 M6 x 15mm Console Screw 2
11 #8 x 15mm Screw 4
12 #4 x 19mm Screw 4
18 M8 x 19mm Screw 4
19 M8 x 78mm Bolt 2
20 Metal Cap 2
26 Plastic Cap 2
27 M8 x 15mm Screw 4
34 M6 x 20mm Screw 2
A Wrench 1
B Allen Wrench 1
C Wrench 1
D Wrench 1
MILLIMETERS
Visit us at: www.evofitness.com
6
Left 1
FX4M MOTORIZED TREADMILL
PARTS LIST
No. Description Qty. Order No. No. Description Qty. Order No.
1 Computer 1 FX4M-01 30
2 Safety Key 1 FX4M-02 31
3 Computer Support 1 FX4M-03 32
4 M6 x 15mm Console Screw 2 FX4M-04 33
5 Plastic Ring 1 FX4M-05 34 M6 x 20mm Screw 2 FX4M-34
6 M5 x 10mm Screw 1 FX4M-06 35 Base Frame End Cap 2 FX4M-35
7 Handle Cover – Left #1 1 FX4M-07 36 M14 x 54MM Screw 2 FX4M-36
8 Handle Cover – Left #2 1 FX4M-08 37 M10 x Nylon Nut 3 FX4M-37
9 Handle Cover – Right #2 1 FX4M-09 38 Topple Bolt 4 FX4M-38
10 Handle Cover – Right #1 1 FX4M-10 39 B# 8 x 43MM Screw 1 FX4M-39
11 #8 x 15mm Screw 34 FX4M-11 40 M14 Nut 2 FX4M-40
Base Frame End Cap –
1 FX4M-30
Base Frame End Cap –
1 FX4M-31
Base Frame End Cap –
1 FX4M-32
Base Frame End Cap –
1 FX4M-33
12 #4 x 19mm Screw 9 FX4M-12 41 Cushion 4 FX4M-41
13 Hand Pulse Sensor 2 FX4M-13 42 Bushing 6 FX4M-42
14 End Cap 2 FX4M-14 43 Caster Bracket 2 FX4M-43
15 Left Handlebar 1 FX4M-15 44 Lock Washer 2 FX4M-44
16 Right Handlebar 1 FX4M-16 45 Wheel Shaft 2 FX4M-45
17 M8 x 25mm Screw 13 FX4M-17 46 Base Frame 1 FX4M-46
18 M8 x 19mm Screw 4 FX4M-18 47 Caster 2 FX4M-47
19 M8 x 78mm Bolt 2 FX4M-19 48 Cross Tube 1 FX4M-48
20 Metal Cap 2 FX4M-20 49 Screw 1 FX4M-49
21 Left Handle Upright 1 FX4M-21 50 M8 x Nylon Nut 2 FX4M-50
22 Right Handlebar Upright 1 FX4M-22 51 Foot Up Lock 1 FX4M-51
23 M5 x 8mm Screw 4 FX4M-23 52 16 x 8mm Washer 1 FX4M-52
24 M6 x 55mm Screw 2 FX4M-24 53 Spring 1 FX4M-53
25 6 x 13mm Washer 2 FX4M-25 54 Motor Hood - Top 1 FX4M-54
26 Plastic Cap 2 FX4M-26 55 Left Side Strip 1 FX4M-55
27 M8 x 15mm Screw 4 FX4M-27 56 Right Side Strip 1 FX4M-56
28 M5 x 8mm Screw 2 FX4M-28 57 Running Belt 1 FX4M-57
29 Power Switch 1 FX4M-29 58 Rear End Cap 1 FX4M-58
Visit us at: www.evofitness.com
7
FX4M MOTORIZED TREADMILL
PARTS LIST
No. Description Qty. Order No. No. Description Qty. Order No.
59 M10 x 35mm Screw 1 FX4M-59 89 Transfer Board 1 FX4M-89
60 Elevation Motor 1 FX4M-60 90 Frame 1 FX4M-90
61 Tube Clamp 2 FX4M-61 91 Micro Switch 1 FX4M-91
62 M5 x 12mm Screw 2 FX4M-62 92 Metal Plate 2 FX4M-92
63 Gear Sleeve 1 FX4M-63 93 M8 x 30 Screw 4` FX4M-93
64 Bumper 1 FX4M-64 94 Cushion 10 FX4M-94
65 U Bracket 1 FX4M-65 95 13 x 6.5 Washer 3 FX4M-95
66 M16 x 54 Screw 1 FX4M-66 96 M6 x 70 Screw 1 FX4M-96
67 Bumper 1 FX4M-67 97 M10 Screw 15 FX4M-97
68 35 x 18mm Washer 1 FX4M-68 98 15 x 8 Washer 10 FX4M-98
69 M16 Nut 1 FX4M-69 99 M8 x 43 Screw 2 FX4M-99
70 22 x 8mm Washer 2 FX4M-70 100 Roller 2 FX4M-100
71 Bumper 1 FX4M-71 101 M6 x 45 Screw 2 FX4M-101
72 M10 x 63mm Screw 1 FX4M-72 102 Rear Roller 1 FX4M-102
73 M8 x 15mm Screw 2 FX4M-73 103 Rear Roller Shaft 1 FX4M-103
74 6 x 13mm Washer 2 FX4M-74 104 Motor Hood - Bottom 1 FX4M-104
75 M10 x Nylon Nut 1 FX4M-75 105 Bushing 4 FX4M-105
76 M10 x 136 Screw 1 FX4M-76 106 Lever Arm Cap - Front 2 FX4M-106
77 M8 x 89mm Bolt 1 FX4M-77 107 Plastic Clamp - Top 2 FX4M-107
78 Motor Holder 1 FX4M-78 108 Plastic Clamp - Bottom 2 FX4M-108
79 Motor 1 FX4M-79 109 Elevation Frame 1 FX4M-109
80 Motor Belt 1 FX4M-80 110 Plastic Cap 2 FX4M-110
81 M3 x 8 Screw 2 FX4M-81 111 Lever Arm Cap – Rear Left 1 FX4M-111
82 Front Roller Shaft 1 FX4M-82 112 Lever Arm Cap – Rear Right 1 FX4M-112
83 Front Roller 1 FX4M-83 113 Pivot Shaft 1 FX4M-113
84 M10 x 30 Screw 8 FX4M-84 114 10mm Lock Washer 2 FX4M-114
85 M4 x 10 Screw 2 FX4M-85 115 Support 1 FX4M-115
86 Spring Bracket 2 FX4M-86 116 Motor Cover Bottom 1 FX4M-116
87 Running Board 1 FX4M-87 117 3/8” x 30mm Screw 2 FX4M-117
88 Control Board 1 FX4M-88 118 Bearing 2 FX4M-118
Visit us at: www.evofitness.com
8
FX4M MOTORIZED TREADMILL
PARTS LIST
No. Description Qty. Order No. No. Description Qty. Order No.
119 22 x 10 Washer 2 FX4M-119
120 14 x 10 x 8 Bushing 2 FX4M-120
121
Pivot Shaft 1 FX4M-121
122 Shock 1 FX4M-122
123 14 x 10 x 18.5 Bushing 2 FX4M-123
124 M10 x 120mm Screw 1 FX4M-124
125 Cushion 2 FX4M-125
126 Spring Bracket 2 FX4M-126
127 Motion Control Sensor 2 FX4M-127
Visit us at: www.evofitness.com
9
FX4M MOTORIZED TREADMILL
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.evofitness.com
10
FX4M MOTORIZED TREADMILL
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.evofitness.com
Loading...