Evo Fitness FX40HR User Manual
USER’S MANUAL
FX40HR MOTORIZED TREADMILL
MODEL NUMBER: FX40HR
USER WEIGHT LIMITATION: 350lbs. (158kgs.)
SERIAL NUMBER (found on frame):
2
FX40HR MOTORIZED TREADMILL
PRECAUTIONS
For future service or related questions:
Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your
Smooth Fitness treadmill.
Name: ______________________________ Phone Number: ___________________
Receipt:_____________________
Precautions:
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important
precautions and information before operating the treadmill. It is the responsibility of the owner to ensure that all
users of this treadmill are adequately informed of all warnings and precautions.
• Use the treadmill only as described in this manual.
• Place on a level surface, with 2 meters (6 feet) of clearance behind it. Do not place the treadmill on any
surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the
treadmill.
• When choosing a location for the treadmill make sure that the location and position permit access to a plug.
• Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered
patio, or near water.
• Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
• Keep children under the age of 12 and pets away from the treadmill at all times.
• The treadmill should not be used by persons weighing more than 350lbs. (158kgs.)
• Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose clothing that could become caught in the treadmill. Athletic support
clothes are recommended for both men and women. Always wear athletic shoes. Never use the treadmill
with bare feet, wearing only stockings, or in sandals.
• When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should
be on the same circuit.
• Always straddle the belt and allow it to start moving before stepping onto the belt.
• Always examine your treadmill before using to ensure all parts are in working order.
• Allow the belt to fully stop before dismounting.
• Never insert any object or body parts into any opening.
• Follow the safety information in regards to plugging in your treadmill.
• Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill.
Do not operate the treadmill with a damaged or frayed power cord.
• Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be
performed by an authorized service representative, unless authorized and/or instructed by the
manufacturer. Failure to follow these instructions will void the treadmill warranty.
• Never leave the treadmill unattended while it is running.
• Safety area of 2,000mm X 1,000mm behind the equipment.
• Use “safety key” when operating the treadmill and make sure “safety key” clipped on the cloth.
• Remove the safety ket and store it away in a safe place when the treadmill is not in use. Keep the safety
key away from children.
Visit us at: www.evofitness.com
FX40HR MOTORIZED TREADMILL
3
POWER REQUIREMENTS
• The emergency dismount function : Please hold the handle bar and step on the foot platform for emergency
dismount, the safety key unclipped from the computer automatically. The treadmill po wer will stop
immediately. The running belt will be slowed down, and then user can get off from the treadmill.
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN
ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS
TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH
THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED
ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage
spikes, surges and noise interference can result from weather conditions or from other appliances being turned on or
off. To reduce the possibility of treadmill damage, always use a surge protector (not included) with your treadmill.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge
protector with a UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppresse d voltage
rating of 400V or less and an electrical rating 110VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance
for electric current, should the treadmill malfunction. This treadmill comes with an electrical cord having an
equipment-grounding conductor and a grounding plug. Al ways plug the po wer cord i nto a surge protector, and plug
the surge protector into an appropriate outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug il lustrated in the
drawing below.
Visit us at: www.evofitness.com
FX40HR MOTORIZED TREADMILL
4
PREASSEMBLY
Open the boxes:
You are now ready to open the boxes of your new equipme nt. Make sure to inventory all of the parts that are
included in the boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this
product to be assembled properly. If you are missing any parts or have any assembly questions call the
manufacturer.
Gather your tools:
Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require
to assemble the unit properly. Having all of the necessary equipment at hand will save time and make the assembly
quick and hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is
free from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a
comfortable amount of free area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another
person when assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 300lbs. (136kgs.) it is not
recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit
shown here. This product is not intended to support users whose weight exceeds this limit.
Visit us at: www.evofitness.com
FX40HR MOTORIZED TREADMILL
5
HARDWARE COMPARISON CHART
Hardware chart:
For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to
help you identify those items that may be unfamiliar to you.
NO. DESCRIPTION QTY.
M6 x 15mm
Screw
9
M8 x 50mm Allen Head
Bolt
13
17 #8 x 19mm Screw 8
21 Plastic Cover 2
22 M6 x 20mm Screw 2
23 M8 x 19mm Bolt 4
109 M8 x 76mm Bolt 2
110 Metal Cap 2
119 Handlebar Fixing Plate 2
132 M6 x 55mm Bolt 2
A Wrench 1
B Screw Driver 1
C Allen Wrench 1
4
4
9
21
109
13
22
110
17
23
132
AB C
MILIMETERS
Visit us at: www.evofitness.com
FX40HR MOTORIZED TREADMILL
6
PARTS LIST
NO. DESCRIPTION QTY. ORDER NO.
1 N/A 29 6.5 x 13mm Washer 1 FX40-29
2 Console 1 FX40-02 30 Fold Up Lock 1 FX40-30
3 Top Console Housing 1 FX40-03 31 Spring 1 FX40-31
Bottom Console
Housing
4
1 FX40-04 32 Base Frame End Cap 2 FX40-32
5 Wire Protection Ring 1 FX40-05 33 Level Adjust 2 FX40-33
6 Safety Key 1 FX40-06 34 Base Frame 1 FX40-34
7 M4 x 12mm Screw 17 FX40-07 35 Rear Moving Wheel 2 FX40-35
Console Support
Tube
8
1 FX40-08 36 Cushion 4 FX40-36
9 M6 x 15mm Screw 4 FX40-09 37 Cap 1 FX40-37
Handlebar Front End
Cap
10
2 FX40-10 38 3/8” x 30mm Bolt 1 FX40-38
Motion Control
Sensor
11
2 FX40-11 39 Bushing 1 FX40-39
NO. DESCRIPTION QTY. ORDER NO.
12 Hand Pulse Sensor 2 FX40-12 40 Wheel 1 FX40-40
M8 x 50 Allen Head
Bolt
13
6 FX40-13 41 Deck Frame Support 1 FX40-41
14 Handle bar - Left 1 FX40-14 42 Shock 1 FX40-42
15 Handlebar - Right 1 FX40-15 43 C Clip 2 FX40-43
16 Plastic Fixin g Insert 6 FX40-16 44 4.5 x 12mm Washer 8 FX40-44
17 #8 x 25 Screw 8 FX40-17 45 M8 x 15mm Screw 30 FX40-45
M5 x 10mm Allen
18
Head Bolt 1 FX40-18 46 M10 Nylon Nut 5 FX40-46
19 Left Upright 1 FX40-19 47 M8 x 40mm Bolt 1 FX40-47
20 Right Upright 1 FX40-20 48 N/A N/A N/A
21 Plastic Cover 2 FX40-21 49 M8 Nylon Nut 2 FX40-49
22 M6 x 20mm Screw 2 FX40-22 50 M10 x 60mm Bolt 2 F X40-50
23 M8 x 15mm Bo lt 8 FX40-23 51 Caster Wheel - Front 2 FX40-51
24 M5 x 8mm Bolt 2 FX40-24 52 Caster Bracket 1 FX40-52
25 Switch Plate 1 FX40-25 53 N/A
26 M14 x 90mm Bolt 2 FX40-26 54 Motor Hood Insert 1 FX40-54
Elevation Support
27
Tube Cover - Right 1 FX40-27 55 Motor Hood 1 FX40-55
28 M5 x 10mm Screw 1 FX40-28 56 M8 x 50mm Screw 2 FX40-56
Visit us at: www.evofitness.com
FX40HR MOTORIZED TREADMILL
7
PARTS LIST
NO. DESCRIPTION QTY. ORDER NO.
57 6.5 x 13mm W asher 5 FX40-57 85 M6 x 70mm Screw 3 FX40-85
58 Side Rail 2 FX40-58 86 Deck Cushion 8 FX40-86
59 Deck End Cap - Left 1 FX40-59 87
60 Deck End Cap - Right 1 FX40-60 88 Front Roller Shaft 1 FX40-88
61 Runnin g Belt 1 FX40-61 89 Fame Cover - Right 1 FX40-89
62 Rail Guide 8 FX40-62 90 10mm Shaft 1 FX40-90
63 M8 x 25mm Screw 8 FX40-63 91 Bushing 2 FX40-91
64 Running Deck 1 FX40-64 92 Plastic Clamp - Top 2 FX40-92
65 Washer 2 FX40-65 93 Plastic Clamp - Bottom 2 FX40-93
66 Rubber Cushion 1 FX40-66 94 Bracket 2 FX40-94
67 M8 x 135mm Bolt 1 FX40-67 95 M10 x 90mm Screw 1 FX40-95
NO. DESCRIPTION QTY. ORDER NO.
Front Roller with
Flywheel 1 FX40-87
68 Motor Bracket 1 FX40-68 96 Spring Washer 8 FX40-96
69 M8 x 15mm Screw 2 FX40-69 97 Rear Roller 1 FX40-97
70 Spring Washer 2 FX40-70 98 Rear Roller Shaft 1 FX40-98
71 8 x 16mm W asher 2 FX40-71 99 M8 Nut 8 FX40-99
M10 x 136mm Hex
Bolt
72
1 FX40-72 100
M8 x 19mm Allen Head
Bolt
4 FX40-100
73 Driving Motor 1 FX40-73 101 Deck Wheel 2 FX40-101
74 Motor Drive Belt 1 FX40-74 102 M8 x 43mm Bolt 2 FX40-102
75 Elevation Motor 1 FX40-75 103 Motor Belly Pan 1 FX40-103
76 Clip 2 FX40-76 104 M8 x 35mm Screw 3 FX40-104
Elevation Support Tube
77 M5 x 12mm Screw 2 FX40-77 105
Cover - Left 1 FX40-105
78 M10 x 63mm Bolt 1 FX40-78 106 Deck Frame 1 FX40-106
79 Motor Control Board 1 FX40-79 107 Cap 2 FX40-107
80 Transformer Board 1 FX40-80 108 Rubber Cushion 2 FX40-108
81 M10 x 35mm Screw 9 FX40-81 109 M8 x 76mm Bolt 2 FX40-109
82 Elevation Support 1 FX40-82 110 Metal Cap 2 FX40-110
83 Micro Switch 1 FX40-83 111 Cross Brace 1 FX40-111
84 Frame Cover - Left 1 FX40-84 112 N/A
Visit us at: www.evofitness.com
FX40HR MOTORIZED TREADMILL
8
PARTS LIST
NO. DESCRIPTION QTY. ORDER NO.
113 N/A
Handlebar Rear End
Cap – Left #1
114
1 FX40-114
Handlebar Rear End
115
Cap – Left #2 1 FX40-115
Handlebar Rear End
Cap – Right #2
116
1 FX40-116
Handlebar Rear End
Cap – Right #1
117
1 FX40-117
118 N/A
Handlebar Fixing
Plate
119
2 FX40-119
Console Support
Tube Fixing Plate
120
2 FX40-120
Motion Control Wire –
121
Upper Section 2 FX40-121
Motion Control Wire –
122
Bottom Section 2 FX40-122
EKG Pulse Wire –
Upper Section
123
2 FX40-123
EKG Pulse Wire –
124
Bottom Section 2 FX40-124
NO. DESCRIPTION QTY. ORDER NO.
125 Caster Wheel - Rear 1 FX40-125
126 Caster Bracket Spring 1 F X40-126
Caster Bracket
127
Sheath 1 FX40-127
128 Wire Loom – Upper 1 FX40-12 8
Safety Key Power
Wire - Upper
129
1 FX40-129
130 Wire Loom - Bottom 1 FX40-130
Safety Key Power
131
Wire - Bottom 1 FX40-131
132 M6 x 55mm Bolt 4 FX40 -132
133 6 x 13mm Washer 2 FX40-133
134 M6 x 12mm Screw 2 FX40-134
Glove Compartment
Frame
135
2 FX40-135
Glove Compartment
Cover
136
2 FX40-136
137 Water Bottle Holder 2 FX40-137
138 Front Handlebar 1 FX40-138
Visit us at: www.evofitness.com
FX40HR MOTORIZED TREADMILL
9
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
136
138
17
12
10
137
16
11
2
17
135
4
3
6
7
8
13
5
120
132
13
119
14
119
11
120
17
16
15
10
9
17
9
37
38
39
40
41
43
47
32
47
36
28
30
22
42
29
45
19
21
36
44
45
44
26
44
45
31
36
23
33
36
32
44
24
25
9
20
22
45
21
34
33
23
26
50
46
50
Visit us at: www.evofitness.com
FX40HR MOTORIZED TREADMILL
10
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.evofitness.com
Loading...