For future service or related questions:
Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth
Precautions:
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and
information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are
adequately informed of all warnings and precautions.
• Use the treadmill only as described in this manual.
• Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that
blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
• When choosing a location for the treadmill make sure that the location and position permit access to a plug.
• Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or
near water.
• Do not operate the treadmill where aerosol products are used or where oxygen is being ad ministered.
• Keep children under the age of 12 and pets away from the treadmill at all times.
• The treadmill should not be used by persons weighing more than 400lbs.
• Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when usin g the
treadmill. Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are
recommended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.
•When connecting the power cord, plug the power cord into a grounded circuit. No other appliance sh ould be on the
same circuit.
• Always straddle the belt and allow it to start moving before stepping onto the belt.
• Always examine your treadmill before using to ensure all parts are in working order.
• Allow the belt to fully stop before dismounting.
• Never insert any object or body parts into any opening.
• Follow the safety information in regards to plugging in your treadmill.
• Keep the power cord away from the incline wheels and do not run the power cord undern eath your treadmill. Do not
operate the treadmill with a damaged or frayed power cord.
•Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by
an authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follo w
these instructions will void the treadmill warranty.
•Never leave the treadmill unattended while it is running.
Visit us at: www.evofitness.com
EVO2 MOTORIZED TREADMILL
3
POWER REQUIREMENTS
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN
ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO
WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE
PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges
and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the
possibility of treadmill damage, always use a surge protector (not included) with your treadmil l.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector
with a UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less
and an electrical rating 120VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for
electric current, should the treadmill malfunction. This treadmill comes with an electrical cord having an equipment-grounding
conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug il lustrated in the
drawing below.
Visit us at: www.evofitness.com
EVO2 MOTORIZED TREADMILL
4
PREASSEMBLY
Open the boxes:
You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the
boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be
assembled properly. If you are missing any parts or have any assembly questions call your loc al Smoo th Retailer.
Gather your tools:
Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require to
assemble the unit properly. Having all of the necessary equipment at hand will save time and make the assembly quick and
hassle-free.
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is free
from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a comfortable
amount of free area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another person
when assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 400lbs. it is not recommended that
you use this product. Serious injury may occur if the user’s weight exceeds the limit shown here. This product is not
intended to support users whose weight exceeds this limit.
Visit us at: www.evofitness.com
EVO2 MOTORIZED TREADMILL
5
HARDWARE COMPARISON CHART
Hardware chart:
For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help
you identify those items that may be unfamiliar to you.
NO. DESCRIPTION QTY.
M6 x 20mm Console Screw
5
2
11 #8 x 12mm Screw 8
12 Plastic Fixing Insert 4
21 M8 x 80mm Allen Head Bolt 2
22 Metal Cap 2
23 Connection Plate 2
31 M6 x 12mm Screw 4
32 Plastic Cover 2
35 M8 x 15mm Allen Head Bolt 4
104 M8 x 50mm Allen Head Bolt 4
107 #8 x 19mm Screw 8
108 #8 x 15mm Screw 12
A Wrench 1
B Wrench 1
C Allen Wrench 1
MILLIMETERS
Visit us at: www.evofitness.com
g
g
g
g
EVO2 MOTORIZED TREADMILL
6
PARTS LIST
No. Description Qty. Order No. No. Description Qty. Order No.
1 Computer 1 EVO2-01 30 Console Support Tube 1 EVO2-30
2 Safety Key 1 EVO2-02 31 M6 x 12mm Screw 6 EVO2-31
3 Console Support Tube 1 EVO2-03 32 Plastic Cover 2 EVO2-32
4 Wire Protect Key 1 EVO2-04 33 M6 x 55mm Bolt 2 EVO2-33
5 M6 x 20mm Console Screw 2 EVO2-05 34 6 x 13mm Washer 11 EVO2-34 35 M8 x 15mm Allen Head Bolt 4 EVO2-35
Handlebar Rear End Cap –
7
Left #1
Handlebar Rear End Cap –
8
Left #2
Handlebar Rear End Cap –
9
Ri
ht #2
Handlebar Rear End Cap –
10
Ri
ht #1
1 EVO2-07 36 M5 x 10mm Allen Head Bolt 2 EVO2-36
1 EVO2-08 37 Power Switch 1 EVO2-37
1 EVO2-09 38 M14 x 90mm Bolt 2 EVO2-38
1 EVO2-99
70 Rubber Cushion 1 EVO2-70 100 Elevation Support 1 EVO2-100
71 M8 x 135mm Bolt1 EVO2-71 101 #8 x 35mm Screw 3 EVO2-101
72 M8 x 15mm Screw2 EVO2-72 102 Motor Belly Pan 1 EVO2-102
73 Spring Washer2 EVO2-73 103 #8 x 65mm Bolt 2 EVO2-103
74 8 x 16mm Washer2 EVO2-74 104 M8 x 50mm Allen Bolt 6 EVO2-104
Upright Plastic Shroud –
75 M10 x 136mm Hex Head Bolt 1 EVO2-75 105
Left #3
1 EVO2-105
Upright Plastic Shroud –
76 Motor Bracket 1 EVO2-76 106
Ri
ht #3
1 EVO2-106
77 Driving Motor1 EVO2-77 107 #8 x 19mm Screw 8 EVO2-107
78 Motor Drive Belt1 EVO2-78 108 #8 x 15mm Screw 16 EVO2-108
79 Front Roller with Fly Wheel1 EVO2-79 109 M8 x 45mm Bolt 2 EVO2-109
Upper Section of Safety
80 Front Roller Shaft 1 EVO2-80 110
Ke
Wire
1 EVO2-110
Lower Section of Safety
81 Micro Switch 1 EVO2-81 111
Ke
Wire
1 EVO2-111
Upper Section of 4
82 M6 x 70mm Bolt 3 EVO2-82 112
Pins Wire
1 EVO2-112
Lower Section of 4
83 Motor Hood Side Cover - Left 1 EVO2-83 113
Pins Wire
1 EVO2-113
Upper Section of 7
84 Motor Hood Side Cover - Left 1 EVO2-84 114
Pins Com
uter Wire
1 EVO2-114
Lower Section of 7
85 Deck Frame 1 EVO2-85 115
Pins Com
uter Wire
1 EVO2-115
86 Frame Side Cover - Left 1 EVO2-86 116 M10 Nylon Nut 1 EVO2-116
87 Frame Side Cover - Left 1 EVO2-87 117 Motion Control Board 1 EVO2-117
88 Plastic Clamp - Top 2 EVO2-88 118 Transfer Board 1 EVO2-118
Visit us at: www.evofitness.com
EVO2 MOTORIZED TREADMILL
8
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.evofitness.com
EVO2 MOTORIZED TREADMILL
9
PARTS DIAGRAM
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.
Visit us at: www.evofitness.com
EVO2 MOTORIZED TREADMILL
10
ASSEMBLY
STEP 1:
Remove your treadmill from the carton and place it on the floor in an open area as shown in FIG-1.
First, remove the 6 x 13mm Washers (34) and M6 x 55mm Bolts (33) from the Base Frame (43), they have been pre-assemble
by the factory. Then make sure to connect the wires from the Left Upright (26) to the Base Frame (43). Next insert the Left and
Right Uprights (26 and 27) into the Base Frame (43) and secure with two M6 x 55mm Bolts (33), two 6 x 13mm Washers (34)
and four M8 x 15mm Allen Head Bolts (35).
Visit us at: www.evofitness.com
EVO2 MOTORIZED TREADMILL
11
ASSEMBLY
STEP 2:
Rotate the Computer (1) up to the correct position as shown in FIG-2 and secure in place using two M6 X 20mm Screws (5).
Visit us at: www.evofitness.com
Loading...
+ 24 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.