Evo Fitness EVO 1CD User Manual

OWNER’S MANUAL

RETAIN FOR FUTURE REFERENCE

TOLL FREE CUSTOMER SERVICE

1.888.800.1167

MODEL NUMBER: EVO 1CD

SERIAL NUMBER:

USER’S WEIGHT LIMITATION 350lbs.

APPLICATION STANDARD

ASSEMBLY

OPERATING INSTRUCTIONS

CONDITIONING GUIDELINES

MAINTENANCE

SERVICE

EVO 1CD Motorized Treadmill

Optional Equipment:Standard Equipment:

For future service or related
questions.

Please staple your receipt and/or
write in the name and phone number

precautions

of the retail store where you
purchased your EVO treadmill.

Name:

Use the treadmill only as

described in this manual.

Place on a level surface, with 6
feet (2 m) of clearance behind it. Do
not place the treadmill on any surface
that blocks air openings. To protect
the floor or carpet from damage, place
a mat under the treadmill.

When connecting the power
cord, plug the power cord into
a grounded circuit. No other
appliance should be on the same
circuit.

Always straddle the belt and allow
it to start moving before stepping
onto the belt.

BEFORE BEGINNING

Phone Number:

Receipt:

Precautions
WARNING: To reduce the risk of

burns, fire, electric shock, or injury
to persons, read the following
important precautions and
information before operating the
treadmill.

It is the responsibility of the owner
to ensure that all users of this
treadmill are adequately informed of
all warnings and precautions.

When choosing a location for the
treadmill make sure that the location
and position permit access to a plug.

Keep the treadmill indoors, away
from moisture and dust. Do not put
the treadmill in a garage or covered
patio, or near water.

Do not operate the treadmill where
aerosol products are used or where
oxygen is being administered.

Keep children under the age of
12 and pets away from the treadmill
at all times.

The treadmill should not be used
by persons weighing more than
350lbs.

Never allow more than one person
on the treadmill at a time.
Wear appropriate exercise clothing
when using the treadmill. Do not wear
loose clothing that could become
caught in the treadmill. Athletic support
clothes are recommended for both
men and women. Always wear
athletic shoes. Never use the treadmill
with bare feet, wearing only stockings,
or in sandals.

-2-

Always examine your treadmill
before using to ensure all parts are
in working order.

Allow the belt to fully stop before
dismounting.

Never insert any object or body
parts into any opening.

Follow the safety information in
regards to plugging in your treadmill.

Keep the power cord away from
the incline wheels and do not run
the power cord underneath your
treadmill. Do not operate the
treadmill with a damaged or frayed
power cord.

Always unplug the treadmill before
cleaning and/or servicing. Service
to your treadmill should only be
performed by an authorized service
representative, unless authorized
and/or instructed by the
manufacturer. Failure to follow these
instructions will void the treadmill
warranty.

Never leave the treadmill
unattended while it is running.

Power Requirements:
IMPROPER CONNECTION OF

THE EQUIPMENT GROUNDING
CONNECTOR CAN RESULT IN A
RISK OF AN ELECTRIC SHOCK.
CHECK WITH A QUALIFIED
ELECTRICIAN OR SERVICE MAN
IF YOU ARE IN DOUBT AS TO
WHETHER THE PRODUCT IS
PROPERLY GROUNDED. DO NOT
MODIFY THE PLUG PROVIDED
WITH THE PRODUCT, IF IT WILL
NOT FIT THE OUTLET, HAVE A

POWER REQUIREMENTS

PROPER OUTLET INST ALLED BY
A QUALIFIED ELECTRICIAN.

This treadmill can be seriously
damaged by sudden voltage
changes in your home’s electrical
power. Voltage spikes, surges and
noise interference can result from
weather conditions or from other
appliances being turned on or off.
To reduce the possibility of treadmill
damage, always use a surge
protector (not included) with your
treadmill.

Surge protectors can be purchased
at most hardware stores. The
manufacturer recommends a single
outlet surge protector with a UL 1449
rating as a Transient Voltage Surge
Suppressor (TVSS) with a UL
suppressed voltage rating of 400V
or less and an electrical rating
120VAC,15 amps.

This treadmill must be grounded to
reduce the risk of electrical shock.
Grounding provides a path of least
resistance for electric current, should
the treadmill malfunction. This
treadmill comes with an electrical
cord having an equipment-grounding

power requirements

conductor and a grounding plug.
Always plug the power cord into a
surge protector, and plug the surge
protector into an appropriate outlet
that is properly installed and
grounded in accordance with all local
codes and ordinances.

This product is for use on a nominal
120-volt circuit, and has a grounding
plug that looks like the plug illustrated
in the drawing below.

TREADMILL POWER CORD

SURGE PROTECTOR
GROUNDING PLUG

GROUNDING PIN

GROUNDING OUTLET

SURGE PROTECTOR

ADAPTOR

SURGE PROTECTOR
GROUNDING PLUG

GROUNDING OUTLET

SCREW

-3-

Open the boxes

Invite a friend

Y ou are now ready to open the boxes
of your new equipment. Make sure
to inventory all of the parts that are
included in the boxes. Check the

preassembly

Hardware Comparison Chart for a
full count of the number of parts
included for this product to be
assembled properly. If you are

BEFORE BEGINNING

missing any parts or have any
assembly questions call your local
Smooth Retailer.

Gather your tools

Before starting the assembly of
your unit, make sure that you have
gathered all the necessary tools you
may require to assemble the unit
properly. Having all of the necessary
equipment at hand will save time
and make the assembly quick and
hassle-free.

Clear your work area

Make sure that you have cleared
away a large enough space to
properly assemble the unit. Make
sure space is free from anything that
may cause injury during assembly.
After the unit is fully assembled,
make sure there is a comfortable
amount of free area around the unit
for unobstructed operation.

Some of the assembly steps may
require heavy lifting. It is
recommended that you obtain the
assistance of another person when
assembling this product.

User Weight Limitation

Please note that there is a weight
limitation for this product. If you

weigh more than 350lbs. it is not
recommended that you use this
product. Serious injury may occur
if the user’s weight exceeds the
limit shown here. This product is

not intended to support users whose
weight exceeds this limit.

-4-

For your convenience, we have
identified the hardware used in
the assembly of this product.
This chart is provided to help you
identify those items that may be
unfamiliar to you.

COMPARISON CHART

Wrench

(1 piece)

Wrench

(1 piece)

Allen Wrench

(1 piece)

Wrench

hardware

(1 piece)

46

Bolt

M8 x 78mm

(2 pieces)

Metal Cap
(2 pieces)

121

Screw

M8 x 19mm

(4 pieces)

10 20 30 40 50 60 70 80 90 1000

MILLIMETERS

40

M4 x 19mm

(4 pieces)

130

Screw

M6 x 15mm

(2 pieces)

8

Screw

-5-

16

Screw

M6 x 20mm

(2 pieces)

4

Safety Key

(1 piece)

17

Screw

M8 x 15mm

(4 pieces)

55

Screw

#8 x 19mm

(4 pieces)

Step 1:
Remove your EVO 1CD Treadmill from

the carton and place it on the floor in an
open area as shown in FIG-1.

ASSEMBLY

Raise the Right and Left Handle Uprights
(6 and 7) to the upright position and
secure with Screws (17).

assembly instructions

FIG-1

-6-

Step 2:
Remove the Screw (51) then rotate the

Computer Support (3) up to the correct
position as shown and secure with the

ASSEMBLY

Screw (51).

assembly instructions

-7-

Step 3:
Rotate the Console (39) up to its proper

angle and secure with Screws (16) as
shown in FIG-2.

ASSEMBLY

assembly instructions

FIG-2

-8-

Step 4:
NOTE:

If you have the Optional Smooth Music Package

ASSEMBLY

follow these instructions before attaching the
Console Tray (137).

Run the Cd Player Wires from the back of the
Console (39) first through the small hole on the
Console Tray (137), then through the tabs on the
back of the Console Tray (137) and finally through
the small hole on the side of the Console (39)
as shown.

Attach Console Tray Bracket (134) to the Console
Tray (137) and secure with Screws (135).

Attach the Console Tray (137). Insert the Console
Tray Bracket (134) into the Console (39) and
secure with the Screw (133).

NOTE: For proper use please make sure to
insert the plastic flange UNDER the metal tab
before inserting the screw.

assembly instructions

Plastic Flange

CD PLAYER

WIRES

-9-

Step 5:
Attach the Cross Tube (45) to the Lef t and

Right Handle Uprights (6 and 7) and secure
with the Metal Cap (40) and Bolts (46).

ASSEMBLY

Secure the Computer Support (3) to the
Right and Left Handle Uprights (6 and 7)
by tightening the Screws (18).

assembly instructions

-10-

Step 6:
Unscrew Bolt (132). Insert the Console

Tray Support T ube (138) into the Cross
Tube (45) and secure with Bolt (132).

ASSEMBLY

Do not fully tighten until later.

assembly instructions

-11-

Step 7:

Rotate the Console Tray Support Tube
(138) and slide it into the hole
underneath the Console Tray (137).

ASSEMBLY

assembly instructions

-12-

Step 8:
Fully tighten Screws (18) and (51) and

Bolts (46) and (132) at this time.

ASSEMBLY

assembly instructions

-13-

Step 9:

Connect the Motion Control Sensor and Hand
Pulse Sensor wires then attach the Right and
Left Handlebars (30 and 12) to the Right and

ASSEMBLY

Left Handle Uprights (6 and 7) and secure
using Screws (121).

assembly instructions

Connect the
sensor wires

Connect the
sensor wires

Connect the sensor wires

-14-