Evo Fitness EVO1 User Manual

USER’S MANUAL

EVO1 MOTORIZED TREADMILL

MODEL NUMBER: EVO1

USER WEIGHT LIMITATION: 350lbs.(159kgs.)

TOLL FREE CUSTOMER SERVICE NUMBER: 1.888.800.1167

SERIAL NUMBER (found on frame):

V-04-20051005

EVO1 MOTORIZED TREADMILL

2

PRECAUTIONS

For future service or related questions:
Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your Smooth

Fitness treadmill.
Name: ______________________________ Phone Number: ___________________ Receipt: ______________________

Precautions:
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and

information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this treadmill are
adequately informed of all warnings and precautions.

• Use the treadmill only as described in this manual.

• Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that

blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.

• When choosing a location for the treadmill make sure that the location and position permit access to a plug.

• Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or

near water.

• Do not operate the treadmill where aerosol products are used or where oxygen is being ad ministered.

• Keep children under the age of 12 and pets away from the treadmill at all times.

• The treadmill should not be used by persons weighing more than 350lbs.(159kgs.)

• Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when usin g the

treadmill. Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are
recommended for both men and women. Always wear athletic shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.

• When connecting the power cord, plug the power cord into a grounded circuit. No other appliance sh ould be on the
same circuit.

• Always straddle the belt and allow it to start moving before stepping onto the belt.

• Always examine your treadmill before using to ensure all parts are in working order.

• Allow the belt to fully stop before dismounting.

• Never insert any object or body parts into any opening.

• Follow the safety information in regards to plugging in your treadmill.

• Keep the power cord away from the incline wheels and do not run the power cord undern eath your treadmill. Do not

operate the treadmill with a damaged or frayed power cord.

• Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by
an authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follo w
these instructions will void the treadmill warranty.

• Never leave the treadmill unattended while it is running.

Visit us at: www.evofitness.com

EVO1 MOTORIZED TREADMILL

3

POWER REQUIREMENTS

Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN ELECTRIC

SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE
PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT
FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.

This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges
and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the
possibility of treadmill damage, always use a surge protector (not included) with your treadmil l.

Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector
with a UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less
and an electrical rating 120VAC, 15 amps.

This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for
electric current, should the treadmill malfunction. This treadmill comes with an electrical cord having an equipment-grounding
conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug il lustrated in the drawing
below.

Visit us at: www.evofitness.com

EVO1 MOTORIZED TREADMILL

4

PREASSEMBLY

Open the boxes:
You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the

boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be
assembled properly. If you are missing any parts or have any assembly questions call your loc al Smoo th Retailer.

Gather your tools:
Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require to

assemble the unit properly. Having all of the necessary equipment at hand will save time and make the assembly quick and
hassle-free.

Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is free

from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a comfortable
amount of free area around the unit for unobstructed operation.

Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another person

when assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 350lbs.(159kgs.) it is not

recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit shown
here. This product is not intended to support users whose weight exceeds this limit.

Visit us at: www.evofitness.com

EVO1 MOTORIZED TREADMILL

5

HARDWARE COMPARISON CHART

Hardware chart:
For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help

you identify those items that may be unfamiliar to you.

NO. DESCRIPTION QTY.

M6 X 20mm Screw

5

2

11 #8 x 12mm Screw 8
12 Plastic Fixing Insert 4
21 M8 x 80mm Allen Head Bolt 2
22 Metal Cap 2
23 Connection Plate 2
31 M6 x 12mm Screw 4
32 Plastic Cover 2
35 M8 x 15mm Allen Head Bolt 4
104 M8 x 50mm Allen Head Bolt 4
A Wrench 1
B Wrench 1
C 6mm Allen Wrench 1

MILLIMETERS

Visit us at: www.evofitness.com

EVO1 MOTORIZED TREADMILL

6

PARTS LIST

No. Description Qty. Order No. No. Description Qty. Order No.

1 Computer 1 EVO1-01 30 Console Support Tube 1 EVO1-30
2 Safety Key 1 EVO1-02 31 M6 x 12mm Screw 4 EVO1-31
3 Console Support Tube 1 EVO1-03 32 Plastic Cover 2 EVO1-32
4 Wire Protect Key 1 EVO1-04 33 M6 x 55mm Bolt 2 EVO1-33
5 M6 X 20mm Screw 2 EVO1-05 34 6 x 13 mm Washer 15 EVO1-34
35 M8 x 15mm Allen Head Bolt 4 EVO1-35

Handlebar Rear End Cap –

7

Left # 1
Handlebar Rear End Cap –

Left # 2

8

Handlebar Rear End Cap –

9

Right # 2 1 EVO1-09 38 M14 x 90mm Bolt 2 EVO1-38
Handlebar Rear End Cap –

10

Right # 1

1 EVO1-07 36 M5 x 10mm Allen Head Bolt 2 EVO1-36

1 EVO1-08 37 Power Switch 1 EVO1-37

1 EVO1-10 39 Base Frame End Cap 2 EVO1-39
11 #8 x 12mm Screw 8 EVO1-11 40 Fixed Tube 1 EVO1-40
12 Plastic Fixing Insert 4 EVO1-12 41 Pipe Shroud 2 EVO1-41
13 Front Handlebar 1 EVO1-13 42 Level Adjuster 2 EVO1-42
14 Motion Control Sensor 2 EVO1-14 43 Base Frame 1 EVO1-43
15 Hand Pulse sensor 2 EVO1-15 44 Cushion 4 EVO1-44
16 Handlebar - Left 1 EVO1-16 45 M8 Nylon Nut 4 EVO1-45
17 Handlebar - Right 1 EVO1-17 46 M10 Nylon Nut 4 EVO1-46
18 Handlebar Front End Cap 2 EVO1-18 47 Caster Bracket 2 EVO1-47
19 #1 Connect Handlebar Slices 2 EVO1-19 48 M10 x 60mm Bolt 2 EVO1-48
20 #8 x 100mm Bolt 2 EVO1-20 49 M8 x 40mm Bolt 2 EVO1-49
21 M8 x 80mm Allen Head Bolt 2 EVO1-21 50 Caster 2 EVO1-50
22 Metal Cap 2 EVO1-22 51 #8 x 15mm Scre w 29 EVO1-51
23 Connection Plate 2 EVO1-23 52 Cushion 1 EVO1-52
24 M8 x 25mm Screw 1 EVO1-24 53 Motor Hood 1 EVO1-53
25 Cross Brace 1 EVO1-25 54 M10 x 35mm Bolt 2 EVO1-54
26 Left Upright 1 EVO1-26 55 Side Rail (R & L) 2 EVO1-55
27 Right Upright 1 EVO1-27 56 Deck End Cap - Left 1 EVO1-56
28 M5 x 12mm Screw 1 EVO1-28 57 Deck End Cap - Right 1 EVO1-57
29 Console Tray 1 EVO1-29 58 Running Belt 1 EVO1-58

Visit us at: www.evofitness.com

EVO1 MOTORIZED TREADMILL

7

PARTS LIST

No. Description Qty. Order No. No. Description Qty. Order No.

59 Rail Guide 8 EVO1-59 87 Frame Side Cover - Left 1 EVO1-87
60 M8 x 25mm Screw 10 EVO1-60 88 Plastic Clamp - Top 2 EVO1-88
61 Running Deck 1 EVO1-61 89 Plastic Clamp - Bottom 2 EVO1-89
62 Deck Cushion 10 EVO1-62 90 Bracket 2 EVO1-90
63 M10 x 35mm Bolt 9 EVO1-63 91 M8 x 19mm Allen Head Bolt 4 EVO1-91
64 Elevation Motor 1 EVO1-64 92 Rear Roller 1 EVO1-92
65 Clip 2 EVO1-65 93 Rear Roller Shaft 1 EVO1-93
66 M5 x 12mm Screw 2 EVO1-66 94 M8 x 43mm Bolt 2 EVO1-94
67 M10 x 63mm Hex Head Bolt 1 EVO1-67 95 Deck Wheel 2 EVO1-95
68 M8 Nylon Nut 1 EVO1-68 96 Spring Washer 10 EVO1-96
69 Washer 2 EVO1-69 97 M8 Nut 10 EVO1-97

Elevation Support Tube

70 Rubber Cushion 1 EVO1-70 98

71 M8 x 135mm Bolt 1 EVO1-71 99
72 M8 x 15mm Screw 2 EVO1-72 100 Elevation Support 1 EVO1-100
73 Spring Washer 2 EVO1-73 101 #8 x 35mm Screw 3 EVO1-101
74 8 x 16nn Washer 2 EVO1-74 102 Motor Belly Pan 1 EVO1-102

75 M10 x 136mm Hex Head Bolt 1 EVO1-75 103 #8 x 65mm Bolt 2 EVO1-103
76 Motor Bracket 1 EVO1-76 104 M8 x 50mm Allen Bolt 6 EVO1-104

Cover - Left 1 EVO1-98
Elevation Support Tube

Cover - Right 1 EVO1-99

Upper Section Of Safety

77 Driving Motor 1 EVO1-77 105

Key Wire

1 EVO1-105

Lower Section Of Safety

78 Motor Drive Belt 1 EVO1-78 106

Key Wire

1 EVO1-106

Upper Section Of 4

79 Front Roller with Fly Wheel 1 EVO1-79 107

Pins Wire

N/A EVO1-107

Lower Section Of 4

80 Front Roller Shaft 1 EVO1-80 108

Pins Wire

N/A EVO1-108

Upper Section Of 7

81 Micro Switch 1 EVO1-81 109

Pins Computer Wire

1 EVO1-109

Lower Section Of 7

82 M6 x 70mm Bolt 3 EVO1-82 110

Pins Computer Wire

1 EVO1-110
83 Motor Hood Side Cover - Left 1 EVO1-83 111 Motor Control Board 1 EVO1-111
84 Motor Hood Side Cover - Left 1 EVO1-84 112 Transfer Board 2 EVO1-112
85 Deck Frame 1 EVO1-85
86 Frame Side Cover - Left 1 EVO1-86

Visit us at: www.evofitness.com

8

EVO1 MOTORIZED TREADMILL

PARTS DIAGRAM

A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.

1

28

11

104

7

23

2

19

4

29

3

13

18

34

8

106

14

25

5

11

9

105

44

34

51

17

26

110

42

109

35

103

104

23

37

39

20

36

34

51

12

31

43

31

27

44

19

30

32

45

42

45

34

50

33

22

35

38

11

21

49

10

47

24

45

48

47

46

49

50

12

14

16

20

21

103

15

0

4

22

31

32

31

39

4

1

44

34

51

18

33

38

4

1

34

51

Visit us at: www.evofitness.com

EVO1 MOTORIZED TREADMILL

9

PARTS DIAGRAM

A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.

Visit us at: www.evofitness.com