Evo TAHOE 51551 Owner's Manual
OWNER’S MANUAL
RETAIN FOR FUTURE REFERENCE
TOLL FREE CUSTOMER SERVICE
1.888.800.1167
MODEL NUMBER: 51551
SERIAL NUMBER:
APPLICATION STANDARD
ASSEMBLY
OPERATING INSTRUCTIONS
CONDITIONING GUIDELINES
WARRANTY
SERVICE
EVO TAHOE Home Gym
preassembly
-2-
BEFORE BEGINNING
Open the boxes
Y ou are now ready to open the boxes
of your new equipment. Make sure
to inventory all of the parts that are
included in the boxes. Check the
Parts List for a full count of the
number of parts included for this
product to be assembled properly.
If you are missing any parts or have
any assembly questions contact your
local Smooth Retailer.
Gather your tools
Before starting the assembly of
your unit, make sure that you have
gathered all the necessary tools you
may require to assemble the unit
properly . Having all of the necessary
equipment at hand will save time
and make the assembly quick and
hassle-free.
Clear your work area
Make sure that you have cleared
away a large enough space to
properly assemble the unit. Make
sure space is flat, level and free from
anything that may cause injury during
assembly. After the unit is fully
assembled, make sure there is a
comfortable amount of free area
around the unit for unobstructed
operation.
For future service or related
questions.
Please staple your receipt and/or
write in the name and phone number
of the retail store where you
purchased your EVO home gym.
Name:
Phone Number:
Receipt:
Invite a friend
Some of the assembly steps may
require heavy lifting. It is
recommended that you obtain the
assistance of another person when
assembling this product.
A MAJORITY OF THE LISTED HARDWARE IS ALREADY IN PLACE
ORDER NUMBER
51551-1
51551-2
51551-3
51551-4
51551-5
51551-6
51551-7
51551-8
51551-9
51551-10
51551-11
51551-12
51551-13
51551-14
51551-15
51551-16
51551-17
51551-18
51551-19
51551-20
51551-21
1” 2” 3” 4”0
1/2
3/41/4
1/2
3/41/4
1/2
3/41/4
1/2
3/41/4
INCHES
part s list
-3-
DESCRIPTION
REAR BASE
SIDE BASE
FRONT UPRIGHT
TOP CONNECT BEAM
RACK
PEC DEC UPRIGHT
TOP CROSS FRAME
REAR UPRIGHT
GUIDE ROD
GUIDE TUBE
LIFT BAR
LAT BAR
RIGHT ADJ HEIGHT ARM
LEFT ADJ HEIGHT ARM
RIGHT PEC DEC ARM
LEFT PEC DEC ARM
FOOT PLATE
PEC DEC LOWER PULLEY BLOCK
LAT BAR HOLDER
LEG PRESS
WEIGHT BASE
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
QUANTITY
1
2
2
1
2
1
1
2
2
2
1
1
1
1
1
1
1
1
1
2
1
A MAJORITY OF THE LISTED HARDWARE IS ALREADY IN PLACE
0 1” 2” 3” 4”
1/2
3/41/4
1/2
3/41/4
1/2
3/41/4
1/2
3/41/4
INCHES
5”
1/2
3/41/4
6”
1/2
3/41/4
part s list
-4-
ORDER NUMBER
51551-22
51551-23
51551-24
51551-25
51551-26
51551-27
51551-28
51551-29
51551-30
51551-31
51551-32
51551-33
51551-34
51551-35
51551-36
51551-37
51551-38
51551-39
51551-40
51551-41
51551-42
51551-43
51551-44
51551-45
51551-46
DESCRIPTION
WEIGHT TOP BLOCK
PEC DEC TOP PULLEY BLOCK
PEC DEC SUPPORT
PEC DEC ADJ CAM
SINGLE PULLEY BRACKET
TRIANGULAR LINK PLATE
SAFETY CATCH
HINGE PLATE
FLOATING PULLEY BLOCK
WEIGHT STAND
SELECT ROD
WEIGHT HOLDER
CURL BAR
SHORT OLMPIC SLEEVE
LONG OLMPIC SLEEVE
CONNECT SLEEVE
1" X 4-1/4" HAND GRIP
1" X 8" HAND GRIP
ANKLE STRAP
SINGLE CURL
4" PEC DEC FOAM PAD
3-1/4" FOAM PAD
BACK PAD
FOAM BINDER
HOOKUP
NUMBER
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
QUANTITY
1
1
1
2
1
8
2
2
1
2
1
10
1
12
2
2
2
2
1
1
2
1
1
1
3
A MAJORITY OF THE LISTED HARDWARE IS ALREADY IN PLACE
ORDER NUMBER
51551-47
51551-48
51551-49
51551-50
51551-51
51551-52
51551-53
51551-54
51551-55
51551-56
51551-57
51551-58
51551-59
51551-60
51551-61
51551-62
51551-63
51551-64
51551-65
51551-66
51551-67
51551-68
51551-69
1” 2” 3” 4”0
1/2
3/41/4
1/2
3/41/4
1/2
3/41/4
1/2
3/41/4
INCHES
part s list
-5-
DESCRIPTION
LINK CHAIN
TOP CABLE
LOWER CABLE
PEC DEC CABLE
PULLEY
2" X 3" END CAP
2" END CAP
2" END PLUG
2" X 3" RECT END PLUG
CAP FOR NUT
2" SPRING CLIP
RECTANGLE BUMPER
1" BUSHING (SMALL)
1" BEARING (LONGER)
3" RUBBER DOUGHNUT
1-1/2" SPACER
2" RUBBER DOUGHTNUT
1" BEARING (SMALLER)
2" SPACER
1-1/8" SPACER
POP PIN
ADJ STOPPER
1" PASTIC BUSHING (LARGER)
NUMBER
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
QUANTITY
1
1
1
1
11
4
2
9
6
2
4
2
2
6
14
2
4
4
2
4
2
1
4
A MAJORITY OF THE LISTED HARDWARE IS ALREADY IN PLACE
0 1” 2” 3” 4”
1/2
3/41/4
1/2
3/41/4
1/2
3/41/4
1/2
3/41/4
INCHES
5”
1/2
3/41/4
6”
1/2
3/41/4
part s list
-6-
ORDER NUMBER
51551-70
51551-71
51551-72
51551-73
51551-74
51551-75
51551-76
51551-77
51551-78
51551-79
51551-80
51551-81
51551-82
51551-83
51551-84
51551-85
51551-86
51551-87
51551-88
51551-89
51551-90
51551-91
51551-92
51551-93
51551-94
51551-95
51551-96
51551-97
51551-98
DESCRIPTION
3/4" BUSHING
3/8" X 5/8" BUSHING
TOP WEIGHT PLATE BOLT
1/2" X 4-1/4" HEX HEAD BOLT
1/2" X 4" HEX HEAD BOLT
1/2" X 3-3/4" HEX HEAD BOLT
1/2" X 3-1/8" HEX HEAD BOLT
1/2" X 3" HEX HEAD BOLT
3/8" X 3" HEX HEAD BOLT
3/8" X 2-3/4" HEX HEAD BOLT
3/8" X 2-1/2" HEX HEAD BOLT
3/8" X 1-3/4" HEAD HEAD BOLT
3/8" X 3/4" HEX HEAD BOLT
3/8" X 2-3/4" HEX HEAD BOL T (ALL THREADED)
3/16" X 1/2" TAPING SCREW
5/16" X 3/8" SET SCREW
5/16" X 1/2" SET SCREW
3/4" X 1-1/2" WASHER
3/8" X 1-1/4" WASHER
1/2" X 1-1/16" WASHER
3/8" X 7/8" WASHER
1-3/4" "C" PIN
2-1/4" "C" PIN
1" "C" PIN
1/2" NYLON NUT
1/2" X 1-1/4" WASHER
3/8" NYLON NUT
BAND
3/8" X 3-3/4" HEX HEAD SCREW
NUMBER
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
QUANTITY
4
8
1
14
10
2
6
6
2
4
1
7
10
2
4
4
14
2
10
75
32
8
4
10
40
2
22
1
8
part s diagram
MANY P ARTS SHOWN HAVE BEEN PRE-ASSEMBLED BY THE F ACTOR Y
-7-
Step 1:
Place Rear Base (1) on the floor.
Cap the Side Bases (2) with 2" x 3" Rect
End Caps (52). Attach the Side Bases (2)
and Triangular Link Plates (27) to both ends
of the Rear Base (1) and secure using 1/2"
x 4-1/4" Hex Head Bolts (73), 1/2" x 1-1/16"
Washers (89) and 1/2" Nylon Nuts (94).
Attach Side Base (2) and Triangular Link
Plates (27) to both sides of the Foot Plate
(17) each using two 1/2" x 4-1/4" Hex Head
Bolts (73), four 1/2" x 1-1/16" Washers (89)
and two 1/2" Nylon Nuts (94).
assembly instructions
-8-
ASSEMBLY
assembly instructions
-9-
Step 2:
Cap Weight Base (21) with 2" Sq End
Caps (53). Attach Pec Dec Upright (6)
and Weight Base (21) to Rear Base (1)
using two 1/2 x 3-1/8" Hex Head Bolts
(76), four 1/2" x 1-1/16" Washers (89)
and two 1/2" Nylon Nuts (94).
Attach Front Uprights (3) to Triangular
Link Plates (27) each using two 1/2" x
4" Hex Head Bolts (74), four 1/2" x 11/16" Washers (89) and two 1/2" Nylon
Nuts (94).
ASSEMBLY
Loading...