80 PLUS Verification and Testing Report
TYPICAL EFFICIENCY (50% Load):
85.15% Insert Picture Here
Note: All measurements were taken with input voltage at 115 V nominal and 60 Hz. Input AC Current Waveform (ITHD = 5.93%, 50% Load)
1.00 0.96 7.58% 20%
Light
110.24 11.9/0.1 3.4/2.2 5.1/2.6 5/0.5 91.74
83.22%
2.34 0.98 5.93% 50%
Typical
265.00 11.9/0.2 3.4/5.5 5.1/6.6 5/1.2 229.51
86.61%
4.69 0.99 4.93% 100%
Full
534.80 11.8/0.4 3.4/11 5.1/13.2 5/2.4 457.89
85.62%
12V (cumulative of 12V1, 12V2, etc.)
DC Terminal Voltage (V)/ DC Load Current (A)
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
0% 25% 50% 75% 100% 125%
Efficiency (%)
Loading (% of Rated Output Power)
Efficiency of the Power Supply
Efficiency %
Input Watts
Output Watts
0.00
100.00
200.00
300.00
400.00
500.00
600.00
20% 50% 100%
Power (Watts)
Loading (% of Rated Output Power)
Input and Output Power
-8
-6
-4
-2
0
2
4
6
8
-200
-150
-100
-50
0
50
100
150
200
0 0.003 0.006 0.009 0.012 0.015
Current (A)
Voltage (V)
Time (s)
Input Current and Voltage Waveforms
Voltage Current
These tests were conducted by a third party independent testing firm on behalf of
the 80 PLUS Program. 80 PLUS is a certification program to promote highlyefficient power supplies (greater than 80% efficiency in the active mode) in
technology applications. http://www.80plus.org/