
Data sheet and installation information
1. Machine conguration and overall dimensions
e'6 / e'6m
e'6 e'6m
w/h/d mm
w/h/d (inch)
weight kg
weight (lb)
Capacity
Coffee 525 Espresso / hour at 23s extraction time
6 Espresso at the same time
Steam Autosteam, temperature controlled
Everfoam, fully automatic frothing (option)
Second steam wand (option)
Hot Water 150 hot water units / hour / 200ml (6.8 oz US)
Milk system 350 Cappuccino / hour
Technical data
Brew chamber 3 x up to 24g
Grinding 4 x drive ceramic grinder disk
User Interface 3 x 8" colour touch screen
Bean hoppers 4 x 1.5kg (3.3 lb)
Coffee spout hgt 65mm to165mm (2.55 to 6.49 inch)
Interface USB, SD-Card, Ethernet, Serial, RS-232, CCI
Standby mode less than 2W
Steam boiler size e'6: 8 litre (2.11 gal US)
e'6m: 5.6 litre (1 x 1.48 gal US)
Coffee boiler size 3 x 1.5 litres (3 x 0.39 gal US)
Lighting concept Front panel full colour LED
Dimensions: mm (inch)
840/713/600
(33 / 27.9 / 23.6)
142
313
840/713/600
(33 / 27.9 / 23.6)
150
330
2 Power cords
Power requirement A
Single-phase
Two-phases
Three-phases
Three-phases
(Triangle)
Power requirement B
Single-phase
Two-phases
Water Connection
Water G3/8" female, 2.5 - 4 bar,
Water hose 2 m length (78.7 inch)
Drain Self priming (see drawing rear side)
Water quality Total hardness: 5 - 8°dGH (89-142 ppm)
Carbonate hardness: max. 6°dKH (107 ppm)
pH value: ideal 7.0 - 7.2
1/N/PE, 220-240V~, 50/60Hz, 25A, 5.8kW
2/PE, 200-210V~, 50/60Hz, 30A, 4.9kW
3/N/PE, 380-420V~, 50/60Hz, 15A, 9.6kW
3/PE, Δ 220-230V~, 50/60Hz, 20A, 5.8kW
1/N/PE, 220-240V~, 50/60Hz, 15A, 3.0kW
2/PE, 200-210V~, 50/60Hz, 15A, 2.5kW
713 (28.07)
556 (21.89)
65 (2.56)
165 (6.49)
157 (6.45)
70 (2.7)
125 (4.92)
840 (33)
600 (23.6)
Eversys AG
I Rue du Biais 19
I 1957 Ardon
I Switzerland
+41 27 305 25 50
[email protected] www.eversys.com
161010_Data_sheet_and_installation_e6_4004_EN Page 1 of 2 10.2016 / V4

6
420
( 16,54 )
141,2
(5,56)
54
(
2,13
)
63
(2,48 )
356
(14,02 )
180,8
(7,12 )
153
( 6,02 )
93
(3,66 )
348
(13,7 )
( )
158
(6,22 )
R
26,5
(
1,04
)
( )
400
800
31,5
15,75
Ø
800
31,5
( )
1
5
2
3
4
5
R
26,5
(
1,04
)
80
(
3,15
)
Ø
2. Prior to the installation, READ SAFETY INSTRUCTIONS
• Check water quality
• Define filter type and size and check space inside counter
• If no discalling cartridge is used, install carbon filter as minimum
• Check required desk for machine
• Check counter cut out
• Check water supply installation
3. After installation
Instruct staff using Quick reference card
•
4. Desk preparation
Dimensions: mm
Drill hole according to instruction
of refrigerator manufacturer
Place fridge as close as possible to machine
Cut milk tubes as short as possible
A+B Electrical connection
Grounds chute through the desk
Required space for bean hopper refilling
(inch)
• Check power supply installation
• Check all with customer on site
• Make sure original coffee is available
• Make sure cold milk is available
• Check drinks recipes and cup sizes
• Organize milk pitcher
Fill in installation warranty sheet and send it back to Eversys
•
mm (inch)
Cut out on desk for:
- Power cord A+B
- water hose
- Serial port
- Ethernet
Water inlet 3/8"
Foot position
Drain hose 23 mm
(inner ø0.6 inch)
Cut out on desk for
Ground chute (optional)
e'4 /e'4m
Power
requirement
A
e'2
B
Power
requirement
Grounds
container
Execution
1. Main water inlet
2. Pressure reducer output 3 bar (43,5 psi)
3. Check valve
4. D e s c a l i n g c a r t r id g e o r ca r b o n l t e r as m i n i mu m
5. Electrical socket according to local standard
6. Drain with syphon, top end min. 56mm diameter (2.2 inch)
according to
EN 61770
Fridge
example
Eversys AG
I Rue du Biais 19
I 1957 Ardon
I Switzerland
+41 27 305 25 50
[email protected] www.eversys.com
161010_Data_sheet_and_installation_e6_4004_EN Page 2 of 2 10.2016/ V4