Everstar Mpk-10cr-1 Owner's Manual

USE & CARE MANUAL

PORTABLE AIR CONDITIONER

Read and follow all safety rules and operating instructions before first use of this product.

Table Of Contents

Page

Introduction.......................................................................................2

Electrical Specifications....................................................................3

Energy-Saving Tips...........................................................................4

Window Installation...........................................................................4

Operating Instructions.......................................................................5

Care and Maintenance....................................................................14

Remote Controller Features............................................................15

Air Conditioner Warranty.................................................................18

Operation Panel

Vertical Louver

Blades

Unit Parts Identification

Adjustable Vertical Louver

Carrying Handle

(both side)

Water Tank

Caster

Introduction

This Owners Manual will provide you with valuable information necessary for the proper care and main-

tenance of your new appliance. If properly maintained, you appliance will give you many years of trouble

free operation. Please take a few moments and read the instructions thoroughly and familiarize yourself

with all of the operational aspects of this appliance.

Your Portable Air-Conditioner is a multi-functional room air-exchanging, air-processing appliance, designed

to offer you the functions of: Cooling, Dehumidifying and Independent Fan. This unit can be conveniently

moved from room to room within your home and setup in just minutes.

It is recommended that the air processing appliance is in an upright position at all times for proper operation

and efficiency. If the air processing appliance has been placed in a horizontal ( unit placed on side) position,

the unit must be placed in an upright position for a minimum of two hours prior to operation.

For easy reference, may we suggest you attach a copy of your sales slip/receipt to this page, along with

the following information which is located on the manufacturers nameplate located on the rear panel of the

unit.

Model Number:

Serial Number:

Date of Purchase:

Dealer"s Name and Address:

This information will be required if your unit requires servicing and/or for general inquiries.

Keep these instructions for future reference.

This symbol denotes a caution or warning.

Do not leave this unit unattended in a space

where people or animals who cannot react to a

failed unit are located. A failed unit can cause

extreme overheating or death in such an

enclosed, unattended space.

CAUTION

Electrical Specifications

1. All wiring must comply with local and national

electrical codes and be installed by a qualified

electrician. If you have any questions regarding

the following instructions, contact a qualified

electrician.

2. Check available power supply and resolve any

wiring problems BEFORE installation and

operation of this unit.

3. This unit draws 9.6 amps (nameplate rated)

under Cooling mode and may be used in

any properly wired, general purpose 15 amp

household grounded receptacle.

4. For your safety and protection, this unit is

grounded through the power cord plug when

plugged into a matching wall outlet. If you are

not sure whether the wall outlets in your home

are properly grounded, please consult a

qualified electrician. DO NOT USE PLUG

ADAPTERS OR EXTENSION CORDS.

5. The manufacturers nameplate is located on the

rear panel of the unit and contains electrical

and other technical data specific to this unit.

6. To avoid the possibility of personal injury, always

disconnect the power supply to the unit, before

installing and/or servicing.

Table 1

Suggested Individual Branch Circuit

Nameplate Amps

7.4 to 12.0

AWG-American Wire Gage

Based on copper wire at 60 C temperature rating.

AWG Wire Size 14

Table 2

Receptacle and Fuse Types

Rated Volts 115

Amps 15

Wall Outlet

Fuse Size

Time Delay Fuse Plug Type (or circuit breaker)

Unit Specifications:

Cooling Capacity

Heating Capacity

Dehumidifying Capacity

Noise Level

Power Source

Refrigerant

Water Tank Capacity

Unit Weight

Unit Dimensions(inches)W D H

Unit Dimensions(cm)W D H

Fan speeds

Control Panel(llluninated)

Time of Day Clock

Auto - Timer

Power Consumption:

Cooling

Heating

MODEL MPK-10CR

Not Applicable

76 Pints (36L/24Hrs)

Less than 54 dB(A)

3.5L(7.4Pints)

33kg(72.7 lb.)

12.8" 18.1" 33.1"

32.5 46 84

Soft Touch Controls

1100Watts(9.6 Amps)

Not Applicable

10000 Btu/h

115V / 60Hz

R22

Yes

Fan

NOTE: Product features or Specifications as described or illustrated are subject to change without notice.

90W(0.8Amps)

Energy-Saving Tips

This appliance is designed to be highly

efficient in energy savings. Follow these

recommendations for greater efficiency.

1) Select a thermostat setting that suits your

comfort needs and leave at that chosen

setting.

2) The air filter is very efficient in removing

airborne particles. Keep the air filter clean at

all times.

3) Use drapes, curtains or shades to keep

direct sunlight from penetrating and heating

room, but do not allow drapes or curtains to

obstruct the air flow around the unit.

Window Installation

Electric Shock Hazard

To avoid the possibility of personal

injury, disconnect power to the unit

before installing or servicing.

CAUTION

To avoid installation/operation difficulties,

read these instructions thorughly.

4) Start your air conditioner before the outdoor air

becomes hot and uncomfortable. This avoids an

initial period of discomfort while the unit is cooling

off the room. Use of the automatic start / stop

programmable TIMER feature can be a major

asset in this regard if utilized to the fullest extent.

5) When outdoor temperatures are cool enough,

turn the air conditioner off and use the FAN

MODE on HIGH, MED or LOW. This circulates

indoor air, providing some cooling comfort and

utilizes less electricity.

The exhaust/window kit must be installed at all times

when the unit is operating under the COOLING mode.

There should be at least 11.8"(30 cm) clearance

between the unit and any other objects or building

structure. The unit should be installed on a level

surface. The window kit does not have to be installed

during operation of the remaining two modes.

(Dehumidifying/Fan).

Installation Accessories Fig.1

Description Qty

Flexible exhaust hose with adapters.........3/pc

stretches from 31" (79cm) up to 89" (226cm)

Window exhaust adapter(flat mouth)...........1pc

Adjustable window/window slider kit....2/pc

from 26 / " (67.3cm) up to 47 / "(121.6cm)

Drain hose connector..................................1 pc

SPECIAL NOTE: Exterior drain hose extension

(direct drain) is not included with this unit and can

be purchased through any local Hardware Store.

Fig. 1 Installation Accessories

Flexible Exhaust Hose 31 - 89""

Unit Connection

Window Exhaust

Transition Adapter

Adapter

Window Kit Installation

Your window kit has been designed to fit most

standard "vertical"and "horizontal" window

applications. However, it may be necessary for

you to improvise/modify some aspects of the

installation procedures for certain types of

windows. Please refer to Fig. 2 & Fig. 2a for

minimum and maximum window openings.

Water Tank Safety Feature

This unit is equipped with a fail-safe switch

mechanism which prevents the unit from

condensing water in the event the water tank is

accidentally displaced, and / or FULL with water.

If this situation occurs, the LED window shows

"P1" and the WATER FULL indicator light will

flash red continuously until the water tank is

correctly positioned and/or emptied.

NOTE: The fan motor will continue to operate

under this condition. This is normal, but no

cooling or dehumidifying will occur until the

tank is emptied and/or correctly installed (It

may take several minutes before the

compressor resumes normal operation).

Horizontal Window

Window Slider Kit Minimum: Maximum: 47 / "(121.6cm)

Vertical Window

26 / " (67.3cm)

Fig. 2a

Window Slider Kit Minimum: 4"(10.1cm ) Maximum: 73 / "(186.7cm)

Fig. 2

Operating Instructions

Before Starting This Unit

1) Select a suitable location, making sure you

have easy access to an electrical outlet.

2) Install the Flexible Exhaust Hose and the

Adjustable Window Slider Kit as depicted in

Fig. 3 & Fig. 3a.

3) Plug the unit into a 115V / 60Hz grounded

electrical outlet (Refer to the nameplate).

DO NOT USE AN EXTENSION CORD.

4) Make sure the Water Tank is correctly

positioned inside the cabinet otherwise the

unit will not operate. Fig 4.

5) To turn the unit on, press the POWER key

(On / Off Switch). Fig. 5.

Fig. 3

Fig. 3a

Fig. 4

Fig. 5

+ 14 hidden pages