Everpure MRS-600HE General Manual
MRS-600HE
NAFEM 2009
High Efficiency Reverse Osmosis System
High output/high efficiency configurable system that delivers
reverse osmosis and blended filtered water for multiple
foodservice applications.
BENEFITS
MRS-600HE System:
EV9970-38*; EV9970-44**;
EV9970-47***;EV997-50****
MR-600 Cartridge EV9627-13
2SR-BW Cartridge EV9627-14
GS-215RO-H In-Line Filter EV9627-15
- System Voltages:
*115 VAC/60Hz; **220VAC/50Hz;
***230VAC/50Hz; ****240VAC/50Hz
The tailored blending process removes just the
right amount of dissolved solids from the
incoming tap water to achieve the desired nal
water quality
High recovery reverse osmosis technology yields
signicant savings in water and sewer charges with
a minimal environmental footprint
With the average recovery of 78%, the
MRS-600HE system only disposes approximately
1/4 cup of water for each cup of water dispensed
Requires less than 50% of the electrical
energy typically consumed by conventional reverse
osmosis systems
On board storage tank provides ample reserve
capacity for most applications - For increased
reserve capacity, Everpure offers a complete line
of storage tanks
Reduces limescale build-up that can cause
excessive machine downtime and increased
maintenance costs
Reduces chlorine taste and odor and other
contaminants that can adversely affect the taste of
water and beverages
INSTALLATION TIPS OPERATION TIPS APPLICATION/SIZING
Choose a mounting location capable of safely
supporting the full weight of the system when in
operation
Deliming of existing water using equipment is
recommended
Never use saddle valve for connection
Use 3/8” (9.5 mm) minimum water line
The water inlet must supply a minimum of 1.5 gpm
(5.7 lpm)
Install vertically with cartridges hanging down and
allow 3” (76 mm) on all four sides of unit for
cover removal and service access
The product water tubing/piping and associated
ttings connecting the RO product outlet to the
equipment being serviced should be suitable for
use with high purity water
Refer to Installation, Operation & Maintenance
Manual for cartridge ushing and RO start-up
Change lter cartridges on a regular 6 month
preventative maintenance program
Change RO cartridges on a regular 1 year
preventative maintenance program
Change cartridges when capacity is reached
Always ush the lter cartridge at time of
installation and cartridge change
Mineral Reduction System for foodservice
applications including coffee brewers, espresso
machines, steamers, combi ovens, and ice – ideal
for specialty coffee
Daily Production Rate
RO Processor Only:
600 gpd (2,271 lpd) nominal
0.417 gpm (1.58 lpm) nominal
RO Processor with Blend:
Capacity will vary based on tap water TDS,
RO percent rejection and desired blend water
TDS. An example of the adjusted capacity is
shown below.
Example: 500 ppm tap water, 90% rejection,
100 ppm blend setting.
Result: 600 GPD RO Processor Only + 75
GPD ltered tap water =
675 gpd (2,555 lpd) nominal
0.469 gpm (1.77 lpm) nominal
MRS-600HE
SPECIFICATIONS
Overall Dimensions:
32" H x 23" W x 13.6" D
813 mm H x 584 mm W x 345 mm D
[Add 3" (76 mm) on all 4 sides for cover
removal and service access]
Inlet and outlet connection:
3/8" (9.5 mm) OD tube connection
Wastewater line connection:
3/8" (9.5 mm) OD tube connection
Daily Production Rate:
Processor Only (no blend):
600 gpd (2,271 lpd) nominal
0.417 gpm (1.58 lpm) nominal
Processor with Blend:
600 gpd (2,271 lpd) nominal
plus tap water addition
- Total daily production rate will vary based
on tap water TDS, RO percent rejection and
desired blend water TDS - Contact Everpure
for assistance estimating this total
Service Flow Rate:
Dependant on water pressure in storage tank
and line size(s) to equipment
Pressure Requirements:
Operating:
25 - 80 psi (1.72-5.52 bar), non-shock
[Pressure below 50 psi (3.45 bar) may
affect blend system performance]
Maximum Static:
100 psi (6.89 bar), non-shock
Available Voltages and Power Cord Types
115VAC/60Hz - NEMA 5-15P Plug
220VAC/50Hz - GB 2099 Plug
230VAC/50Hz - “Schuko” CEE 7/7 Plug
240VAC/50Hz - AS 3112 Plug
Minimum Water Supply:
1.5 gpm (5.7 lpm)
High Efficiency
Reverse Osmosis System
WARRANTY
MRS-600HE system (excluding replaceable elements) is covered by a
limited warranty against defects in material and workmanship for a
period of one year after the date of purchase.
Everpure replaceable elements (filter cartridges and water treatment
cartridges) are covered by a limited warranty against defects in material and workmanship for a period of one year after date of purchase.
See printed warranty for details. Everpure will provide a copy of the
warranty upon request.
Everpure offers a full line of water
storage tanks. See “ROmate Storage Tanks”
specification sheet or contact your Everpure
sales representative for more information.
Inlet Temperature:
40–100°F (4–38°C)
Inlet TDS:
1000 ppm max. recommended
Shipping Weight:
85 lbs. (38.6 Kg)
Operating Weight:
90 lbs. (40.8 Kg)
(not including external storage tanks)
The contaminants or other substances removed or
reduced by this system are not necessarily in your water.
Do not use with water that is microbiologically unsafe
or of unknown quality without adequate disinfection
before or after the system.
NO09
Loading...