Everpure Water Filtration System, Model H-54, Model H-300, Model H-300+M, Model H-104 Installation Instructions Manual

Thank you for purchasing an Everpure commercial-grade water
filtration system for your home. With your Everpure system, you
get premium quality water direct from your tap that’s great-tasting,
healthful and convenient for you and your family.

Product Specifications:

For Cold Water Use Only

•
Temperature Range: 35-100°F (2-38°C)

•
Min.-Max. Working Pressure: 10-125 psi (0.7-8.6 bar)

•
Service Flow Rate: 0.5 gpm (1.9 Lpm)

•

Gracias por comprar un sistema de filtración de agua Everpure
de categoría comercial para su hogar. Con el sistema Everpure
usted obtiene directamente de la llave un agua de primera calidad
de buen sabor, saludable y en forma conveniente para usted y su
familia.

Especificaciones Del Producto:

Para uso únicamente con agua fría

•
Gama de temperatura: 2-38°C (35-100°F)

•
Presión de servicio mín. - máx.: 0.7-8.6 bar (10-125 psi)

•
Caudal de servicio: 1.9 Lpm (0.5 gpm)

•

Water Filtration System

Sistema de filtración de agua

Système de filtrage d’eau

INSTALLATION INSTRUCTIONS ENGLISH

Product Specifications

Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 3,5

Basic Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . Page 3 –5

H 1200 Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . Page 5–6

Claims & Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 6

INSTRUCCIONES DE INSTALACIÓN ESPAÑOL

Especificaciones Del Producto

Herramientas necesarias. . . . . . . . . . . . . . . . . . . . . . . . . . . Páginas 7,9

Instrucciones básicas de instalación . . . . . . . . . . . . . . . .Páginas 7–9

H 1200 Instrucciones de instalación . . . . . . . . . . . . . . . .Páginas 9–10

Declaraciones y notas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Página 10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 1

. . . . . . . . . . . . . . . . . . . . . . . . . Página 1

Everpure vous remercie de votre achat d’un filtre de qualité
professionnelle pour votre logement. Avec votre système Everpure,
votre famille et vous pourrez facilement tirer directement à votre
robinet, de l’eau de qualité supérieure au goût excellent et bonne
pour la santé.

Caractéristiques Techniques Du Produit:

Pour usage sur eau froide uniquement

•
Gammes de températures : 2 à 38°C

•
Pression utile mini. – maxi. : 0.7-8.6 bar

•
Débit de service : 1.9 Lpm

•

Everpure Technical Services (8 00) 942-1153
7:00 AM –6:00 PM CST (Monday–Friday)

EV3070-43 Rev W AP07

INSTRUCTIONS D’INSTALLATION FRANÇAIS

Caractéristiques Techniques Du Produit

Outils nécessaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 11,13

Instructions d’installation de base . . . . . . . . . . . . . . . . . .Pages 11–13

Consignes d’utilisation pour l’H 1200 . . . . . . . . . . . . . . . Pages 13–14

Revendication & remarques . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 14

Servicios Técnicos de Everpure [phone]
7:00 a 18:00 h, hora del centro de EE.UU. (Lunes a viernes)

. . . . . . . . . . . . . . . . . .Page 1

Services Techniques Everpure [phone]
7h00 à 18h00 Heure Centrale des États-Unis (Lundi–Vendredi)

Notes • Notas • Remarques

• 2 •

WAT ER FI LTER MON ITOR

www.ev erpure.co m

THE OWNER’S GUIDE IS APPLICABLE FOR THE FOLLOWING
EVERPURE FILTER MODELS:

Model H-54

Rated Capacity:
750 G (2835 L)*

Model H-300

Rated Capacity:
300 G (1140 L)*

Model H-300+M

Rated Capacity:
500 G (1892 L)*

* For optimum performance, cartridge

replacement is required once a year, or sooner
if flow becomes too slow for convenience, or if
the unit’s rated capacity is reached.

H 1200 customers: Instructions for installing the H-1200 begin
on page 5 of this Installation and Operation Guide.

Model H-104

Rated Capacity:
1,000 G (3780 L)*

Model H-300-HSD

Rated Capacity:
300 G (1140 L)*

Model H-1200

Rated Capacity:
1,000 G (3780 L)*

BASIC INSTALLATION INSTRUCTIONS

Tools Needed For Installation

•

Phillips Screwdriver

•

Wrench

•

Utility Knife

•

Measuring Tape

•

Pencil

OPEN CARTON & INSPECT PARTS

1.

Installation Parts

Key Description Part No.

1 QL3 Filter Head EV9258-01
2 Filter Cartridge (varies)
3 2 Locking Washers EV3062-04
4 2 Screws EV3061-96
5 Angle Stop Valve Adaptor EV3121-20
6 Tubing, 1/4" poly A08601-19
7 Elbow Fitting Pack Restrictor EV3081-68

®

8 Teflon
9 Faucet Connector EV3121-35

10 Everpure Filter Timer EV9075-70

Tape EV3121-19

The Universal Plumbing Code adopted by over 20
states, and other specific state and county codes prohibit the use of
saddle valves and their use is never recommended. You must adhere
to your state/local plumbing codes. Consult your licensed plumber if
you have related questions.

Do NOT use copper tubing with the John Guest
Fittings provided with your Everpure Filter System. Copper tubing
may appear to fit, but water leaks will develop over time and use. If
copper tubing is required, you must use copper compression fittings
available from any hardware/plumbing supply.

Multiple Appliance Connections: You can also connect your
Everpure Filter to the refrigerator for ice and water, an instant hot
dispenser or chiller, or a plumbed-in coffee brewer. Simply install
connection “tees” (available from any hardware/plumbing supply)
in the water line between the filter and the faucet adaptor, and run
new tubing to each appliance.

NOTE: DO NOT connect this system to a commercial ice maker.
These appliances require flow and volume beyond the design limits
of your under-sink filter system.

NOTE: If connecting to a home icemaker and there is no filter faucet
connection under the sink: A flush valve is required.

1

1

3

4

5

7

2

6

10

8

ENGLISH

VERIFY UNDER-SINK MOUNTING LOCATION

2.

Measure 22” from the base of the cabinet, and mark the
mounting location for the top of the filter head. Make sure there
is adequate space above the head to open and close the built in
shut-off valve and to avoid crimping the water line tubing. Also,
make sure your chosen location offers easy access for future
cartridge changes..

DIMENSION Width Height Depth
H-54 5" 15" 5"
H-104 5" 20" 5"
H-300 5" 22" 5"
H-300 +M 5" w/monitor 22" 5"
H-300-HSD 5" 22" 5"

NOTE: The head and cartridge must be mounted in the vertical
position, with the cartridge hanging down.

9

2

22 "

• 3 •

3.

MOUNT FILTER HEAD UNDER SINK

A.

Identify Filter Head and the two Elbow Fittings, and
note that the Outlet Fitting has a black band. This fitting
includes a small restrictor insert to insure maximum
flow at 1/2 gallon per minute.

B.

Apply Teflon Tape to the threads of each Elbow Fitting.
Wrap tape in direction of the threads to assure a tight fit
and avoid small leaks.

C.

Screw Inlet Elbow Fitting into the left side of the filter
head, and hand tighten only.

D.

ENGLISH

Screw Outlet Elbow Fitting (black band) into the right
side of the filter head in the same manner.

E.

Securely mount the filter head on the cabinet wall using
the enclosed mounting screws and washers.

1.

ATTACH INLET WATER SUPPLY

F.

Locate and close the cold water Angle Stop Valve under
your kitchen sink. Open cold water line of faucet to
release water pressure.

G.

Unscrew and disconnect the braided tubing on top of the
Angle Stop Valve .

H.

Attach the bottom of Angle Stop Adaptor to the existing
cold water Angle Stop Valve.

I.

Attach the braided tubing to the top of the Angle Stop
Adaptor.

J.

Close side valve on Angle Stop Adaptor and open cold
water Angle Stop Valve to return water service to
kitchen sink. Check for leaks.

NOTE: Teflon
next steps.

K.

Measure length of tubing needed to connect Angle
Stop Adaptor to Inlet Elbow Fitting on Filter Head. Allow
adequate tubing to avoid sharp turns.

L.

Cut tubing at a 90° angle using a sharp knife.

M.

Insert ends of tubing into quick-connect fittings. Push
tube into fitting and gently pull to confirm a tight fit.

5.

ATTACH FILTERED WATER TO SINK FAUCET

N.

Install separate faucet for filtered drinking water. Follow
individual manufacturer’s instructions.

O.

Attach Faucet Connector Fitting to bottom end of
threads on new faucet assembly. Teflon
not be required for this step.

P.

Measure length of tubing needed to connect the
Outlet Elbow Fitting on Filter Head to the new Faucet
Connector Fitting. Allow adequate tubing to avoid sharp
turns. Cut and insert each end of the tubing into the
fittings.

OPTIONAL FILTER MONITOR (H300+M Filter System)

A Filter Replacement Monitor (EV3112-01) is included with the
H300+M Filter System. It is a small water meter that counts the
number of gallons used. This Monitor includes quick-connect
fittings, and should be installed on the tubing between the filter
system and the faucet connector.

Monitor Instructions (Document EV3112-52) are included with
the H 300+M System.

®

Tape should not be required for these

®

Tape should

3

4

5

C

D

B

E

F

I

G

H

L

M

N

• 4 •

P

O

WATE R FI LTER MONI TOR

www.ever pure.com

WAT ER F ILTE R MO NITO R

www.e verpure. com

6.

INSTALL AND FLUSH FILTER CARTRIDGE

Q.

Lift handle of the build-in shut off (QC Valve) on the
Head.

R.

Hold Head firmly with one hand.

S.

Align cartridge lug with label on filter Head.

T.

Insert filter Cartridge – Push upwards.

U.

Turn it to the right – About 1 ⁄4 turn – Until rotation stops.

V.

Open Side Valve of Angle Stop Adaptor and check for
leaks up to Inlet Elbow Fitting.

W.

Open Filtered Water Faucet.

X.

Lower the QC Valve Handle to flush water to the sink.
NOTE: Flush new filter cartridges for at least 3 minutes

to remove air and any loose carbon. At first the water
may appear cloudy due to trapped air in the filter and
tubing. If water continues to be cloudy for more that one
week, please contact Everpure Technical Services for
assistance.

Y.

Remove plastic wrapper and pull Tab from back of
Everpure Filter Timer. The LED and buzzer will cycle 3
times to confirm the start. It is programmed to flash/
sound again in 11 months. Remove adhesive backing and
mount Timer in a convenient location under the sink.

6

Q

R

V W

Y

S

T

Label

Lug

ENGLISH

U

X

H-1200 INSTRUCTIONS

Tools Needed For Installation

•

Phillips Screwdriver

•

Wrench

•

Utility Knife

•

Measuring Tape

•

Pencil

OPEN CARTON & INSPECT PARTS

1.

Installation Parts

Key Description Part No.

1 QL Twin Series Filter Head EV9272-25
2 Filter Cartridges (Set of 2) EV9282-01
3 2 Locking Washers EV3062-04
4 2 Screws EV3061-96
5 Angle Stop Valve Adaptor EV3121-20
6 Tubing, 1/4" poly A0860119
7 Elbow Fitting Pack Restrictor EV3081-68

®

8 Teflon

9 Faucet Connector EV3121-35
10 Everpure Filter Timer EV9075-70
11 Shut Off Valve,

12 Coupler, 3/8" FPT Stainless EV3123-50

Tape EV3121-19

3/8" John Guest x 3/8" FPT

EV3098-60

1

3

4

5

1

7

2

6

8

10

11

12

9

• 5 •