EverFocus EZA1240 User Manual
EZA1240 eZ.HD Series
1080p FHD IP66 IR Bullet Camera
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: April, 2019
All the images including product pictures or screen shots in this document are for example
only. The images may vary depending on the product and software version. Information
contained in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw
1. Introduction
EverFocus eZ.HD series cameras – EZA1240 deliver 1080p full HD image quality.
The model provides 3.6mm fixed lens with ICR. Featured with Digital Wide
Dynamic Range (D-WDR), the camera can provide clear images even under
backlight circumstances where intensity of illumination can vary excessively.
The EZA1240 supports both NTSC and PAL scanning systems and is IP66
certified.
1.1 Packing List
Camera x 1
Mounting Sticker x 1
L-Type Wrench x 1
Screw & Screw Anchor x 3
User Manual x 1
1.2 Features
Equipped with 1080p Full HD CMOS sensor to deliver stunning image
quality
3.6mm fixed lens with ICR to capture the desired field of view
Extended IR range of up to 25m / 82ft. with 20 LEDs (depends on scene
IR reflectivity)
D-WDR to improve the visibility under high contrast scene
The flexible angle viewing with its 3-Axis rotation design allows wall or
ceiling mounting
IP66-rated with metal housing
Supports UTC function: Control camera OSD settings directly from DVR
end
1
2
70mm / 2.76"
157mm / 6.18" 66mm / 2.6"
BA-E310
Power Cable
Video Output Cable
1
2
1.3 Dimensions
1.4 Optional Accessory
Color / Material: White / Metal
Size (Φ x H): 101 x 52mm / 3.98”x 2”
Weight: 540g / 1.2lb
1.5 Cable Description
No. Name Descriptions
1 Power Cable Connects to a 12VDC power source.
2 Video Output 1080p output, using 75 Ohm BNC-type coaxial cable.
2. Installation
1. Stick the supplied Mounting Sticker to the surface to mark the 3 screw
positions. Drill 3 holes on the surface and insert the supplied 3 Screw
Anchors into the screw holes. If you want to run the cable through the
surface, drill a hole within the 3 screw area.
Loading...