EverFocus EZ950W, EZ950B, EZ930W, EZ930B User Manual
EZ930/950 eZ.HD Series
720p Analog High Definition
True Day/Night Outdoor IR Bullet Camera
User’s Manual
Copyright © EverFocus Electronics Corp,
Release Date: Nov., 2014
Precautions
1. Do not install the camera near electric or magnetic fields. Install the camera away from
TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the
electromagnetic fields generated from these devices may distort the video image or
otherwise interfere with camera operation.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein. Improper disassembly or introduction of
corrosive materials may result in equipment failure or other damage.
3. Try to avoid facing the camera toward the sun. In some circumstances, direct sunlight may
cause permanent damage to the sensor and/or internal circuits, as well as creating
unbalanced illumination beyond the capability of the camera to compensate.
4. Keep the power cable away from water and other liquids and never touch the power cord
with wet hands. Touching a wet power cord with your hands or touching the power cord
with wet hands may result in electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents. Oil, gas or solvents may
result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning. For cameras with interchangeable lenses, do not touch the surface of the sensor
directly with the hands. Use lens tissue or a cotton tipped applicator and ethanol to clean
the sensor and the camera lens. Use a damp soft cloth to remove any dirt from the camera
body. Please do not use complex solvents, corrosive or abrasive agents for cleaning of any
part of the camera.
7. Do not operate the camera beyond the specified temperature, humidity or power source
ratings. This camera is suitable for indoor operation only. Use the camera at temperatures
within -40°C~50°C (-40°F~122°F) and humidity less than 80%; this device is not rated as
submersible. The input power source is 12VDC or 24VAC. Be sure to connect the proper + / -
polarity and voltage, as incorrect polarity or too high a voltage will likely cause the camera
to fail, and such damage is not covered by the warranty.
8. Mounting. Use care in selecting a solid mounting surface which will support the weight of
the camera plus any wind, snow, ice or other loading, and securely attach the camera to the
mounting surface using screws and anchors which will properly support the camera. If
necessary (e.g. when mounting to drop ceilings) use a safety wire to provide additional
support for the camera.
2
Safety Notice
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
3
Contents
1. Introduction...................................................................................................................... 5
1.1 Packing List ..................................................................................................................... 5
1.2 Features .......................................................................................................................... 6
2. Cable Description .............................................................................................................. 7
3. Installation ....................................................................................................................... 8
3.1 Installation and Adjustment ........................................................................................... 8
4. Configuration in the OSD Menu ........................................................................................ 12
5. Specifications ................................................................................................................... 16
4
EZ930/950 eZ.HD Outdoor IR Bullet Camera
Model
Image Sensor
Resolution
IR LEDs
Lens type
IR Distance
Day / Night
EZ930
1/2.8" SONY
1.37M pixels
CMOS
720p
80 Units
2.8-12mm DC
Iris with ICR
35m/115ft.
True
Day/Night
EZ950
8 Units
5-50mm DC
Iris with ICR
50m/165ft.
Camera Body x 1
Hexagon Wrench x 1
User Manual x 1
Screw Driver x 1
Test Lead x 1
Plastic Anchor x 3
DC Power Pigtail Cable x 1
Screw x 3
Quick Installation Guide x 1
Template Plate x 1
Desiccant Bag x 1
1. Introduction
Get incredible performance in bright light or low light, and the resolution listed in the specification
from the actual camera you install. To take full advantage of the amazing resolution available from
this advanced imaging technology, the EverFocus eZ.HD Series EZ930/950 uses a vari-focal lens
together with 1/2.8" SONY 1.37M pixels CMOS to deliver 720p high resolution. Combined with a
useable native low light sensitivity of 0.08lux without using digital slow shutter. This camera truly
provides color without compromise: 720p High resolution, Digital Wide Dynamic Range for clear
color images in the most challenging of bright or unbalanced scene lighting conditions, plus true
day/night IR enhanced images in low light environments with guaranteed ZERO ghosting. The
EZ930/950 camera equipped with IP66 weather resistant housing has 3-axis rotation design that delivers wall
or ceiling mounting flexibility. Your choice of vari-focal DC iris lens for easily adjustable field of view;
dual voltage operation and a full suite of OSD Menu and DSP functions controllable at the camera
(3DNR to save DVR HDD space, privacy masking, mirroring, and much more) This is the camera that
you have been waiting for to create analog CCTV systems that produce astounding image clarity in a
wide range of outdoor applications at the widest range of light levels. The EZ930/950 supports both
NTSC and PAL scanning systems, which can be switched via OSD.
1.1 Packing List
5
EZ930/950 eZ.HD Outdoor IR Bullet Camera
1.2 Features
720p with high flexibility and performance for astounding image
1/2.8" SONY 1.37M pixels CMOS, very low light sensitivity
Vari-focal 2.8~12mm(EZ930)/ 5~50mm(EZ950) DC iris lens to captures the
desired field of view
80 IR LEDs for 35m/115ft.range(EZ930);
8 pcs 3G Array IR LEDs for 50m/165ft.range(EZ950)
D-WDR to improve the visibility under high contrast scene
Provides 3D Noise Reduction ensures less blurry moving subjects, vivid and high SN ratio
images even under low light environments
Support 720p & 960H analog signal output, which can be easily switched by OSD
Internal wire system with anti-cut bracket
Weather Resistant IP66 and built-in heater
Supports Ceiling Mount and Wall mount
6
Loading...