Mobile Digital Video Recorders
EMV Series
EMV400
Mobile Digital Video Recorders
Compact 4 Channels H.264 Mobile DVR
(Wi-Fi optional)
Features Specications
• 4 Channels of video and audio recording
• 1-DIN car audio size
• Recording Rate: 60fps@D1 resolution /
120fps@2CIF / 240fps@CIF resolution (with global
settings; record rate, resolution and quality can be
set independently per-camera up to the maximum
of 240CIF-equivalent fps)
• H.264 compression format for efcient disk and
network utilization
• Front and rear panel video outputs for easy
connection and conguration
• Special Graphical User Interface design for use with
mobile small-sized monitors
• Molex connectors for shock & vibration resistance;
interface cables to BNC, RCA and power jacks
supplied
• Alarm Inputs & Outputs: 6 & 2 (alarm outputs are
form “C”)
• Embedded 3-axis G Sensor function with separate
programmable alarm levels for X/Y and Z axis
• Supports single 2.5” SATA hard disk standard (up to
1TB)
• Supports multiple interfaces: 3xUSB, RS-485, RS232, GPS port, wired Ethernet, IR Remote Control
• Optional wireless 802.11 b/g with diversity antennas
• Provides camera power for 4 cameras ; interface
cables to power jacks supplied
• Optional External EDGE / GPRS / CDMA / WI-FI
Modules for cellular/specialized wireless transmission
• GPS function tracks speed and geographic limits
(optional external GPS receiver)
• Power Supply: 10V~36VDC with Surge Protection,
Voltage Regulator, programmable Delay on/off
• Temperature: -40ºC~55ºC (Operating), -40ºC~85ºC
(Non-Operating)
Video Format NTSC/PAL (auto detected by system)
Operating System Embedded Linux with special small monitor friendly GUI
Video Input
Video Output Main monitor: 1 composite BNC rear panel / 1 front panel RCA output
Video Compression H.264
Video Display Full, 4/9/12, Sequence
Recording Resolutions (set
independently per camera)
Audio Inputs
Audio Outputs 1 front panel RCA line out
Alarm Inputs 6 alarm inputs (vibration resistant locking Molex connectors - Interface cables supplied)
Alarm Outputs
Storage 2.5" HDD x 1 (up to 1TB)
Recording Rate
Recording Mode
Record Quality Adjustable in ve levels per camera per Record Mode
Pre Alarm Recording Optional; 5 second interval
Playback Rate
Playback Search Time/Date, event search
Video Loss Detection Yes
Event Alarm
Email Alert
G Sensor
GPS Function
Conguration Method On screen menu with ‘portable monitor friendly’ graphical user interface
Control/Setup IR remote control, USB mouse, network I/F
Real-time Clock Can be synchronized to GPS/NTP time source; exible DST settings
Watchdog Function Reboots DVR automatically if required
Networking
System Warnings
File Export USB 2.0 interface
Interfaces RS-232 x 2, RS-485, USB x 3, GPS port
Power Source
Camera Power Outputs
Dimensions (W x D x H)
Weight
Operating Temperature
Certicates CE, FCC
4 channels (vibration resistant locking Molex connectors – Interface cables to BNC-F
4 line in (vibration resistant locking Molex connectors - Interface cables to RCA-F supplied:
(Per camera resolutions and record rates can be set individually per camera through the
OSD menus up to the maximum record capacity of 240 (200)FPS@CIF
Continuous recording, event recording, continuous + event recording
Fan failure, hard disk temperature, hard disk failure, hard disk full, hard disk removed,
(Requires real-time network connectivity through cellular or WiFi service)
10V~36VDC (Built in surge protection, voltage regulation, programmable Delay On/Off
900mA for camera 1~2 and 900mA for camera 3~4. Vibration resistant locking Molex
connectors – interface cable provided to coaxial power plugs: 2 x groups of 2 cameras
DVR in mount with antennas 272 x 145 x 224mm/10.7” x 5.7” x 8.8”
supplied: two groups of 2 cameras each)
NTSC: 720x480 / 720x240 / 360x240
PAL: 720x576 / 720x288 / 360x288
two groups of 2 cameras each)
2 alarm outputs (form “C”; contacts rated at 30V AC/DC @ 1 amp –
(Rate and resolution in each mode set independently per camera)
Multiple email notications in response to alarms and events
alarm if separate user limits for X/Y or Z axis exceeded
Optional External GPS Sensor for speed and geographic limit alarms
RJ45 socket, 10/100Mbps; 802.11b/g WiFi, diversity antennas
TCP-IP / DHCP / PPPoE / DDNS / SMTP / SSL / POP3 / HTTP / NTP
Total current 5.5 amps @ 12VDC with 4ch x 450mA cameras
DVR alone: 178 x 50 x 199mm/7” x 2” x 7.8” (1-DIN size)
interface cables supplied)
NTSC: D1 60Fps, 2CIF 120 fps, CIF 240 fps
PAL: D1 50 Fps, 2CIF 100 fps, CIF 200 fps
NTSC: D1 60fps, 2CIF 120fps, CIF 240fps
PAL: D1 50fps, 2CIF 100fps, CIF 200fps
power loss (after power is restored), network loss,
GPS loss, GPS speed, GPS fencing, G sensor limits
Embedded 3-axis G Sensor; data recorded;
(rectangular or circular fencing)
System fail LED : HDD full, HDD/Sys Temp, Fan fail,
HDD fail LED : HDD power off, HDD failure
relative to ignition or other switched voltage)
DVR without mount 1.7kg/3.75lbs
DVR with mount 2.15kg/4.74lbs
Working Temperature: -40ºC~55ºC / -40ºF~131ºF
Storage Temperature: -40ºC~85ºC / -40ºF~185ºF
* All product specications are subject to change without notice
46
* Models vary in different countries. Please visit EverFocus regional websites for detailed ordering information