EverFocus EMV200 User Manual

User Manual

MVV220000

DVV

E V E R F O C U S ELECTR O N I CS C O RP O R A T I O N

EMV200 DVR

Instruction Manual

 2010 EverFocus Electronics Corp

www.everfocus.com

any means without written permission of the Everfocus Electronics Corporation.

Release Date: Apr. 2011

QuickTime is a registered trademark of the Apple Computer, Inc.

Windows is a registered trademark of the Microsoft Corporation.

Linksys is a registered trademark of the Linksys Corporation.

D-Link is a registered trademark of the D-Link Corporation.

DynDNS is a registered trademark of the DynDNS.org Corporation.

Other product and company names mentioned herein may be the trademarks of their respective owners.

SAFETY PRECAUTIONS

Ventilation Slots: Do not block the ventilation openings or slots on the cover.

Limits for Temperature, Humidity and Power: Do not operate the device beyond its specified

temperature, humidity or power source ratings. Do not use the device in environments with very high temperature or humidity. Use it at temperatures between -20~55ºC (-4~131ºF). The input power source for this device is 10~36VDC.

Servicing: Do not attempt to service this unit by yourself. Do not attempt to disassemble the device. Opening or removing covers may expose you to dangerous voltages and other hazards. There are no userserviceable parts inside. Refer all work on this device to qualified service personnel. Handle the device with care. Do not strike or shake it, as this may damage the device.

Cleaning: Unplug the unit from the outlet before cleaning. Do not use strong or abrasive detergents when cleaning the device’s cover. Use a damp cloth to clean the device when it is dirty. If the dirt is hard to remove, use a mild detergent and wipe gently.

Attached Devices: Do not attach devices that are not recommended by the manufacturer.

Power Outlets: Do not overload outlets and extension cords as this could cause fire or electric shock.

Power Cables: Power cables and their connectors should be placed where they are not likely to be walked

on, crushed or pinched by items placed upon or against them.

Foreign Objects: Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short out parts, possibly resulting in fire or electric shock. Do not let any metallic parts drop through the slots, as this could permanently damage the device. If this happens accidentally, turn the power off immediately and contact qualified service personnel for support.

Liquids: Do not expose the device to water or moisture, and do not try to operate it in wet areas or near water – for example: near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor installation, etc. Take immediate action if the device becomes wet. Turn the power off and refer servicing to qualified service personnel. Moisture can damage the device and can also cause electric shock. Never spill liquid of any kind on the unit.

Read All Instructions: All the safety and operating instructions should be read before the unit is operated.

Retain These Instructions: The safety and operating instructions should be retained for future reference.

Heed All Warnings and Follow All Instructions.

iiii

This Product is RoHS compliant.

ATTENTION!

This is a class A product which may cause radio interference in a domestic environment; in

this case, the user may be urged to take adequate measures.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accord

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television recep

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one of the following measures

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by

authority to operate this equipment.

The information in this manual was current upon publicatio

Therefore, all specifications are subject to change without prior notice.

efore installing and using this unit. Be sure to keep it handy for later reference.

ance with the instructions, may cause harmful interference to

the party responsible for compliance

n. The manufacturer reserves the right to revise and improve his products.

Manufacturer is not responsible for misprints or typographical

tion, which can be

could void the users’

receiver.

WEEE

errors. Please read this manual carefully b

iii

iiiiii

TABLE OF CONTENTS

1 PRODUCT OVERVIEW ..................................................................................................... 1

1.1 FEATURES ........................................................................................................................... 1

1.2 PACKAGE CONTENTS ......................................................................................................... 2

1.3 SPECIFICATIONS ................................................................................................................. 2

1.4 FRONT PANEL ..................................................................................................................... 3

1.5 REAR PANEL ....................................................................................................................... 4

1.6 SYSTEM CONNECTION ....................................................................................................... 5

1.7 FRONT & REAR PANEL CONNECTOR .................................................................................. 6

1.8 INSTALLATION OF EMV200 ................................................................................................ 6

1.9 VIDEO INPUTS/OUTPUTS INSTALLATION ......................................................................... 10

1.10 AUDIO INSTALLATION ................................................................................................... 10

1.11 ALARM CONTACTS INSTALLATION ................................................................................ 10

1.11.1 Alarm Input Contacts ............................................................................................................................. 11

1.11.2 Alarm Output Relay ............................................................................................................................... 11

1.12 USB-M

1.13 NETWORK CONNECTION ............................................................................................... 12

1.13.1 Direct PC Connection through Crossover Network Cable ...................................................................... 12

1.13.2 Network Connection through Patch Cable ............................................................................................ 13

1.14 FINAL INSTALL PROCESS ................................................................................................ 13

OUSE INSTALLATION

................................................................................................. 11

2 MOUSE OPERATION ..................................................................................................... 14

2.1 GENERAL USB MOUSE OPERATION ................................................................................. 14

2.1.1 How to select a channel......................................................................................................................... 14

2.1.2 OSD Root Menu ..................................................................................................................................... 14

2.1.3 Field Input Options ................................................................................................................................ 15

3 CONFIGURATION ......................................................................................................... 16

3.1 CONFIGURATION OF DVR ................................................................................................ 16

3.2 LOGIN ............................................................................................................................... 16

3.3 ON S

CREEN CONFIGURATION MENU

........................................................................................ 17

3.4 SEARCH ............................................................................................................................ 18

3.4.1 Time Search ........................................................................................................................................... 18

3.4.2 GPS Speed Search .................................................................................................................................. 19

3.4.3 Event Search .......................................................................................................................................... 21

3.5 ARCHIVE (USB) ................................................................................................................. 22

4 DVR CONFIGURATION .................................................................................................. 23

4.1 C

ONFIGURATION MENU

......................................................................................................... 23

4.2 CAMERA SETTING ............................................................................................................ 24

iviv

4.2.1 Normal ................................................................................................................................................... 24

4.2.2 Video Adjust .......................................................................................................................................... 25

4.2.3 Alarm ..................................................................................................................................................... 26

4.3 RECORD SETTING ............................................................................................................. 26

4.3.1 Record .................................................................................................................................................... 27

4.4 ALARM/GPS ..................................................................................................................... 28

4.4.1 Alarm-Alarm Settings ............................................................................................................................ 28

4.4.2 Alarm-Event Settings ............................................................................................................................. 30

4.4.3 Alarm – Video Loss ................................................................................................................................ 35

4.4.4 Alarm-GPS Speed ................................................................................................................................... 36

4.4.5 Alarm-GPS Event Action ........................................................................................................................ 37

4.4.6 Alarm-GPS Fencing ................................................................................................................................ 38

4.5 D

4.5.1 Date/Time Settings ................................................................................................................................ 39

4.5.2 Daylight Saving ...................................................................................................................................... 40

4.6 D

4.6.1 Title ........................................................................................................................................................ 41

4.6.2 Monitor On Screen Display .................................................................................................................... 41

4.6.3 Layout .................................................................................................................................................... 42

4.6.4 Sequence ............................................................................................................................................... 43

ATE/TIME SETTING

ISPLAY

.............................................................................................................................. 40

............................................................................................................. 39

4.7 NETWORK SETTING .......................................................................................................... 43

4.7.1 LAN Settings .......................................................................................................................................... 44

4.7.2 Mobile Connection Settings ................................................................................................................... 46

4.7.3 Email Settings ........................................................................................................................................ 47

4.7.4 DDNS Settings ........................................................................................................................................ 48

4.7.5 Alarm Server Settings ............................................................................................................................ 49

4.7.6 Meta Server Settings ............................................................................................................................. 50

4.7.7 Network Test ......................................................................................................................................... 51

4.7.8 Remote/Mobile...................................................................................................................................... 51

4.8 SYSTEM ............................................................................................................................ 52

4.8.1 User ....................................................................................................................................................... 52

4.8.2 I/O Control ............................................................................................................................................. 55

4.8.3 DISK Info ................................................................................................................................................ 56

4.8.4 LOG ........................................................................................................................................................ 57

4.8.5 SETTINGS ............................................................................................................................................... 58

4.8.6 SERVICE .................................................................................................................................................. 59

4.9 INFORMATION ................................................................................................................. 60

5 NETWORKING OVERVIEW ............................................................................................ 61

5.1 I

5.2 S

5.3 G

5.4 V

5.5 PRE-I

5.6 W

5.7 S

NTRODUCTION TO

UBNET MASKS

ATEWAY ADDRESS

IRTUAL PORTS

NSTALLATION

HAT IS YOUR NETWORK SETUP

IMPLE ONE TO ONE CONNECTION

TCP/IP ..................................................................................................... 61

.................................................................................................................... 61

.............................................................................................................. 61

.................................................................................................................... 62

................................................................................................................ 62

? ........................................................................................... 63

.......................................................................................... 64

vvvv

5.8 D

5.9 R

IRECT HIGH SPEED MODEM CONNECTION

OUTER OR

LAN C

ONNECTION

................................................................................................ 68

............................................................................... 67

6 REMOTE OPERATION FROM BROWSER ............................................................................. 71

6.1 CONNECTING TO EMV200 ............................................................................................... 71

6.2 BROWSER SECURITY SETTING .............................................................................................. 72

6.2.1 Installing ActiveX controls ..................................................................................................................... 72

6.2.2 Enabling ActiveX Controls ...................................................................................................................... 74

6.3 REMOTE LIVE VIEW .......................................................................................................... 77

6.4 REMOTE PLAYBACK ......................................................................................................... 79

7 EVERFOCUS DDNS SETUP ............................................................................................. 80

8 LINKSYS & D-LINK PORT FORWARDING ........................................................................ 81

8.1 TYPICAL LINKSYS PORT FORWARDING ............................................................................ 81

8.2 TYPICAL D-LINK PORT FORWARDING .............................................................................. 83

9 SD CARD READER ......................................................................................................... 85

9.1 U

9.2 B

9.2.1 Open File ....................................................................................................................................................... 86

9.2.2 Open SD ........................................................................................................................................................ 86

9.2.3 Playback Controls ......................................................................................................................................... 86

9.3 S

9.3.1 Search by Date/Time .................................................................................................................................... 86

9.3.2 Search by Event ............................................................................................................................................ 86

9.3.3 Search by Video Slide Bar ............................................................................................................................. 87

9.4 A

9.4.1 Archive Video from Video Window ............................................................................................................... 87

9.4.2 Snapshot Image ............................................................................................................................................ 87

NDERSTAND USER INTERFACES

ASIC OPERATIONS

EARCH VIDEO

RCHIVE AND SNAPSHOT

.............................................................................................................. 86

..................................................................................................................... 86

....................................................................................................... 87

.............................................................................................. 85

10 TROUBLESHOOTING ....................................................................................................... 88

APPENDIX A: TIMING OF ALARM MODES ............................................................................. 89

APPENDIX B: EXPRESS SETUP RECORDING VALUE SELECTION RULES .................................... 92

APPENDIX C: REMOTE CONTROL .......................................................................................... 94

vivi

Chapter

1 PRODUCT OVERVIEW

Full featured video surveillance in the palm of your hand: the EverFocus EMV200 digital video recorder features a built-in GPS receiver with antenna to track location and H.264 compression technology for efficient recording and fast, high quality network image transmission. Record real-time video with audio on both channels (up to 30/25fps per channel @ D1 resolution). Its ultra compact size allows easy installation almost anywhere. In a vehicle, for fast deployment at a temporary fixed site, or in portable battery powered surveillance, the EMV200 is ready to do the job! This amazing DVR provides multiple interfaces including a USB port, wired Ethernet, IR remote control, 2 alarm inputs and 1 SPDT/Form “C” alarm output. Using shock and vibration resistant Molex connectors, it is solid enough for reliable operation even on bumpy roads. Add to this a new easy to read graphical user interface specially designed for use with portable small-screen monitors, and you get a powerful surveillance in a small package. The power supply in the EMV200 will provide surge protection and voltage regulation for the DVR. These comprehensive features, including plug-and-play SD card recording, speed reporting and ‘virtual fencing’ using the embedded GPS module and hand held IR remote control capability make this DVR the best choice for your 1~2 channel portable and mobile recording applications.

1.1 FEATURES

 2Channels of real time D1 video and audio recording  Built-in GPS module tracks speed, location and geographic limits  Ultra compact size (300g/117 x 63 x 38.4mm add inch/pound data) for easy installation  Recording Rate : up to 30/25fps per channel @ D1 resolution  H.264 compression format for efficient storage and network utilization  Special Graphical User Interface design for use with small-sized mobile/portable monitors  Molex connectors for shock & vibration resistance; interface cables to BNC, RCA and power jacks supplied  Alarm Inputs & Outputs : 2 & 1 (alarm relay output is form “C”)  Plug-and-play recording on completely shock proof SD card with security cover (up to 32GB)  Swap out SD recording media, or export video through convenient USB port.  USB port supports a mouse for easy setup, programming and playback/export  Supports multiple interfaces: USB 2.0, RS-232, wired Ethernet, IR Remote Control  Optional External EDGE/GPRS/CDMA/WI-FI Modules for cellular/specialized wireless Transmission  GPS function tracks speed and geographic limits (Embedded GPS module, optional external GPS antenna

required)

 Power Supply : 10V~36VDC with Surge Protection, Voltage Regulation, programmable Delay ON/OFF for

flexible control

 Temperature range : -10ºC ~ 55ºC/14 ºF ~131 ºF (Operating), -40ºC ~ 85ºC/-40 ºF~185 ºF (Non-Operating)

Video Format

Operating System

Video Input

Video Output

Main monitor: 1 composite

1 Vp-p, (vibration resistant locking Molex connectors

–

Video Compression

Recording Resolution

NTSC: 704x480/ 704x240/352x240

Audio Inputs

Audio Outputs

1 line out (vibration resistant locking Mol

ex connectors

- Interface cables to RCA

Alarm Inputs

2 alarm inputs (vibration resistant locking Molex connectors

- Interface cables

Alarm Outputs

alarm relay output

SPDT/Form “C”

(vibration resistant locking Molex

Recording Storage

Recording Rate

Up to NTSC: 60fps, PAL: 50fps at all resolutions (D1, 2 CIF, CIF

)

Recording Mode

Continuous recording, event recording, continuous + event recording (Rate and

Record Quality

Adjustable in five levels per camera per Record Mode

Pre Alarm Recording

Optional; 5 seco

nd interval

Playback Rate

Playback Search

Video Loss Detection

1.2 PACKAGE CONTENTS

Digital Video Recorder x1

Screws x 1 pack with Plum wrench

GPS Antenna x 1 set

IR Remote Control x 1

Battery x 2

Camera Power cable x 1

Video & Audio cable x 1

RS232/Alarm cable x 1

1.3 SPECIFICATIONS

EMV200

EMV200 ---- 2CH Mobile DVR

EMV200 EMV200

NTSC/PAL (auto detected by system) Embedded Linux with special small monitor friendly GUI 2 channels (vibration resistant locking Molex connectors – Interface cables to

BNC-F provided)

2CH Mobile DVR

2CH Mobile DVR2CH Mobile DVR

(Rate and resolution set independently per camera)

Interface cables to BNC-F provided) H.264

PAL: 704x576/ 704x288/352x288

2 line in (vibration resistant locking Molex connectors - Interface cables to RCA-F provided).

F provided).

supplied)

connectors - Interface cables supplied) 1 SD/SDHC card storage card Up to 32Gb with tamper resistant retention cover

resolution in each mode set independently per camera)

Up to NTSC: D1 60fps, PAL: D1 50fps Time/date, event search Yes

Event Alarm

Email alert

Multiple email notifications in response to alarms and events. (Requires real time

GPS Function

Embedded GPS Sensor(

optional external GPS antenna required

) for speed and

Configuration Method

On screen menu with ‘portable monitor friendly’ graphical user interface

Control/Setup

Real time clock

Watchdog Function

Reboots DVR automatically if required

Networking

RJ45 socket, 10/100Mbps

TCP-IP/DHCP/PPPoE/DDNS/SMTP/SSL/POP3/HTTP/NTP

Interface

Power Source

Dimensions

Weight

Operating Temp.

SD card error, SD card temperature, SD card Full, SD card missing, Power Loss, Network Loss, GPS loss, GPS speed, GPS fencing

network connectivity though cellular device).

geographic limit alarms (rectangular or circular fencing)

IR remote control, USB mouse, network I/F Can be synchronized to GPS/NTP time source; flexible DST settings

RS-232, USB 2.0

13.8/27.6VDC nominal; 10V~36VDC range (Built in surge protection, voltage regulation, programmable Delay On/Off relative to ignition or other switched voltage)

117 x 63 x 38.4mm / 4.6”x 2.5”x 1.5” 300g / 0.66lbs.

Working Temperature: -10℃~55℃; 14 ºF ~131 ºF

Storage Temperature: -40℃~85℃; -40 ºF~185 ºF

1.4 FRONT PANEL

Your primary interaction with your new DVR will be through the Front Panel buttons and their corresponding

buttons on the included IR Remote Control. Take a moment to learn where the keys are as the remainder of the

manual will refer to them often.

Figure 1-1 Front Panel

1) SD Card Slot: Slot to insert SD card.

2) IR Receiver: Receiver for IR remote control.

3) Alarm Input(2), Alarm Output(1) & RS232:

Alarm Input (2) - Connect up to 2 alarm inputs, selectable between N.O./N.C. contacts.

Alarm Output (1) - N.C or N.O type alarm out (form “C”).

RS232 - Connect to RS232/RS485 compatible device.

4) Power LED: This LED ON indicates Power on.

5) Network Connector: RJ-45 network connection 10/100Mbps Ethernet. There are two LEDs on the LAN jack; Green LED means network is connected, amber LED flickers when data is being exchanged.

6) Philips mounted/Pin-torx: Use Philips screw for an easier mounting to prevent over-tightening. Use Pin-

torx for a safe installation to prevent cam-out. A screwdriver is included for Pin-torx.

REAR PANEL

During initial setup you will be connecting your DVR to multiple input and output devices. This is done through the

rear panel.

Figure 1-2 Rear Panel

○○○○1 GPS Antenna: Connect to the GPS antenna.

○○○○2 Power Input and Switched Ignition: 1 pin is reserved for power input; connect to 10V~36VDC power source.

1 pin is for ignition control; connect to the other vehicle devices to avoid excess power consumption at ignition.

○○○○3 Video & Audio Input/Output:

Video Inputs (2): Connect camera’s video output or other composite video source to the video input

connection. Audio Input (1): Connect line level output of an audio preamplifier to the audio input connection corresponding to the appropriate camera. Video Output (1): Monitor for live and playback display and on-screen display. Audio Output (1): Connect to the line level input of an audio amplifier

○○○○4 USB port: USB port recommended for connecting the USB mouse.

1.5 SYSTEM CONNECTION

Please refer to the following diagrams for the system connections.

Note: Monitor and Camera must be purchased separately.

1.6 FRONT & REAR PANEL CONNECTOR

GND GND GND RS232-RXD1 RS232-TXD1

ALARM_OUT ALARM_IN ALARM_COM ALARM_IN_1 GND

VIN1 VIN2 TV_OUT AUDIO_IN AUDIO_OUT GND GND GND GND GND

ING_IN

GND

Alarm/RS232

Audio/Video

Power In

GND

DC12V

1.7 INSTALLATION OF EMV200

Step 1. Please put your EMV200 on the suitable location of vehicle. Please see the figure below.

Step 2. Please tighten 4 screws at 4 corners of device to the surface. Please see the figure below.

Now you have completed all mounting procedures.



Possible Installation Locations Inside the Automobile Vehicle: Truck

Glove box (inside or underneath)

Drive seat (between seat and wall) or Passenger seat (underneath)

(Users are suggested to use “support” for mounting option)



Show the wiring on the wiring harness that connects to the electrical system.

Trunk (Users are suggested to use



Possible Installation Locations Inside the Automobile Vehicle

Glove box (inside or underneath)

“suspend” for mounting option)

Passenger seat (underneath)

Drive seat (between seat and wall)



Show the wiring on the wiring harness that connects to the electrical system.



Installing the Camera(s) and Monitor

The DVR is typically connected to one camera installed inside the car. Other camera(s) can also be installed in different locations (for example, use the waterproof camera to the outside of vehicle). For installation procedure, please refer to the guide that came with the camera(s) you purchased. The Monitor power supply connects from the Automotive adapter (cigarette plug) Monitor and cameras must be purchased separately.

LCD Monitor



Connect the Camera(s)Connect the power connector from the camera(s) harness into the CAMERA

POWER OUT jack on the back panel of the DVR. Connect the primary camera(s) video connector to the CAMERA INPUT and the audio connector to the AUDIO INPUT in the back panel. Adjust the camera(s). After the camera is installed, connect a monitor directly to the camera and observe the image. Make any adjustment if necessary.

1.8 VIDEO INPUTS/OUTPUTS INSTALLATION

Cameras and CCTV monitors must use copper center conductor/copper braid 75 Ohm video cable (e.g. RG-59, RG-6, RG-11) with BNC connectors.

To avoid impedance mismatch and undesired loss/reflections, 50 Ohm coax cable (e.g. RG-58), or 75 ohm foil shield antenna cable and other types of coaxial cable are not compatible.

All connected video sources must provide a 1 Vpp NTSC or PAL standard video signal.

When converting other transmission types (twisted pair, fiber optics, radio) for the video inputs, be sure to verify accurate receiver calibration and signal levels.

ATTENTION: In order for the system to auto-detect the appropriate video format (NTSC or PAL), make sure that there is a video signal on video input 1 upon power-up.

1.9 AUDIO INSTALLATION

This DVR provides 2 line level audio inputs and 1 line level audio output.

ATTENTION: The direct connection of a non-amplified microphone is not supported (a microphone amplifier is required). The audio output requires an amplifier to drive a speaker or headphones.

The installation must be connected with audio coax cable and RCA plugs.

AUDIO RECORDING FUNCTIONALITY:

Audio recording is activated / deactivated in the Camera Menu for Camera #1~2 respectively. Please check and always comply with local laws and regulations when using audio recording.

The audio channel is always recorded together with video and is independent of the image recording rate. Though the audio record control is done in the Camera #1~2 screen, there is no specific camera allocation.

1.10 ALARM CONTACTS INSTALLATION

The alarm inputs can be used to start recording or for recording rate adjustment. In addition, alarm reactions such as camera display on the monitor, buzzer, e-mail and network alarm are available. The alarm output relay can be switched if required. Alarm input response actions can be controlled according to a flexible schedule.

1.10.1 Alarm Input Contacts

This DVR provides one alarm input per camera. All inputs are programmable N.O. (Normal Open) or N.C. (Normal Closed) Inputs have to be switched by dry contacts. All settings are programmed in the ALARM menu (Section 0).

Alarm input with N.O. (Normal Open) contact Alarm input with N.C. (Normal Closed) contact in idle state in idle state

1.10.2 Alarm Output Relay

The relay output provides either Normally Open or Normally Closed dry contacts.

Output relay in idle state

1.11 USB-Mouse installation

Connect the USB mouse to one of the 2 USB ports. (This can be done while DVR is powered on) The rear USB V1.0 port is recommended to reserve the higher speed front USB V2.0 port for video copy/export.

NOTE: Recommended mouse types are Logitech® and Microsoft® wired USB wheel-mouse. Wireless USB mouse is not supported.

1.12 NETWORK CONNECTION

This section only describes physical connection to an Ethernet network. This step must be completed before the DVR can connect to the network. There are two basic types of connection:

1.12.1 Direct PC Connection through Crossover Network Cable

The point-to-point connection of DVR and PC requires a crossover (crossed) network cable. This type of connection is ONLY used for direct connection to a single PC. Make sure that the PC is equipped with a 10/100 Mbps compatible network connection.

Figure 1-3 Direct PC Connection

Pinout of crossover-cable

1.12.2 Network Connection through Patch Cable

The connection to an existing network requires a normal patch cable (straight-through). The illustration shows the connection to a network switch or router.

Figure 1-4 Network Connection through Patch Cable

Pinout of straight patch cable

1.13 FINAL INSTALL PROCESS

Once you have completed the basic wiring connections, you are ready to turn on the DVR. Simply plug in the power source. The POWER LED will light up if power is normal. Once the system has finished loading, you can begin to set up the menu options for the DVR.

Chapter

2 MOUSE OPERATION

EMV200 mobile DVRs support 2 sources to control the DVR. It can be controlled with a mouse and the handheld IR remote control. (For IR remote control, please refer to Appendix C Remote Control)

This chapter will cover the basic operation using the mouse.

2.1 GENERAL USB MOUSE OPERATION

2.1.1 How to select a channel

1. In a view consisting of more than one channel, users can select a channel by clicking once on the desired

channel screen. The selected screen will be highlighted by a white frame.

2. Double clicking on a channel screen will display full screen for this channel.

2.1.2 OSD Root Menu

1. Right-click the mouse to obtain the DVR Root menu (see Figure 2-1 OSD Root Menu ).

Figure 2-1 OSD Root Menu

2. Click on any icon to perform that action. These actions are covered in detail in Chapter 3.

Space

Enter a space

Caps

Switch to capital letters

Delete

the letter

Confirm the selection

Move to right

Move to left

3. Click the button to go to live view.

2.1.3 Field Input Options

The following are examples of different types of fields available in the Configuration menu.

Textbox: Click on the box and an on-screen

keyboard will appear*. (see note about the on-screen keyboard below)

Dropdown box: Click on the down arrow to see all selections, then directly click on an

option to select it.

Check box: Click on the box to enable it (checked) or disable it (unchecked).

Button: Click the button to execute the function.

* Note about on-screen keyboard:

Click on a button to input that character. The buttons on the right and bottom have the following functions:

Figure 2-2 On-Screen Keyboard

/Del

Chapter

3 CONFIGURATION

This chapter provides information for configuring EMV200.

3.1 CONFIGURATION OF DVR

EMV200 can be configured through On Screen Display Playback and Configuration

Connect to the “Main Mon” output with a monitor and use the mouse or the remote control to configure menu settings.

3.2 LOGIN

In order to access EMV200 options, users may be asked to log in for authority identification. To log in, follow these steps.

1. Right click on the screen to display the Main Menu

2. The following screen pops up:

Figure 3-1 Login page

3. Select the user name from the drop-down list and input the password. The defaults are:

User name: admin (lower case)

Password: 11111111

To input password: click the password field to bring up the on-screen keyboard (see Figure 3-2 On-screen Keyboard). Click on each button to input the desired characters for the password. When finished, click “ ” on

the on-screen keyboard to confirm the password.

+ Click on the “Login” button to log in to the system.

Playback Bar

Name

Description

Layout

The

EMV200

DVR has

several display modes

available

. C

lick on the

Display mode

Press to show camera

information

, press again to show network,

Figure 3-2 On-screen Keyboard

3.3 On Screen Configuration Menu

1. To bring up the Main Menu, right-click with the USB mouse to bring up the root menu.

2. Left-click on the “Playback” icon “ ” to enter the Playback Menu. A Playback Bar appear as shown

below:

Figure 3-3 On-screen Configuration

desired layout choice

HDD, GPS information. Press again to hide all information.

Audio

Press

to cycle through Audio 1, 2,3,4 or no audio

Fast Rewind

Press to

start fast reverse playback

Play Press to pla

yback

Fast Forward

Press

start fast forward playback

Press to search by Time, Event or GPS

. Please see

“

3.4 Search

” for

EverFocus EMV200 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual