Please read this manual first for correct installation and operation. This manual should be retained for future
reference. The information in this manual was current when published. The manufacturer reserves the right
to revise and improve its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio
speakers since the electromagnetic fields generated from these devices may distort the video image.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein.
Improper disassembly or introduction of corrosive materials may result in equipment failure or other
damage.
3. Try and avoid facing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal
circuits.
4. Keep the power cord away from water and other liquids and never touch the power cord with
wet hands.
Touching a wet power cord with hands or touching the power cord with wet hands may result in electric
shock.
5. Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
Do not touch the surface of the sensor directly with the hands. Use a damp soft cloth to remove any
dirt from the camera body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor
and the camera lens. Please do not use complex solvents, corrosive or abrasive agents for cleaning.
7. Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera at temperatures within-10°C~50°C (14°F~122°F) and humidity between 20~80%.
The input power source is 12VDC/24VAC.
1.1 Main Features ............................................................................................................................................... 3
2. NAMES AND FUNCTIONS OF PARTS ............................................................................ 7
2.1 Camera Component Description...................................................................................................................... 7
2.2 Front And Back Panel Layout .......................................................................................................................... 7
2.3 Related Products......................................................................................................................................... 9
3.2 Adjusting Camera ............................................................................................................... 13
3.2.1 Adjusting Camera Position ......................................................................................................................... 13
3.2.2 Adjusting Zoom and Focus......................................................................................................................... 14
3.2.3 Camera Setting...................................................................................................................................... 15
3.2.3.1 OSD User Setup Menu ........................................................................................................................... 15
3.2.4 Close the Camera Cover (after installation is complete) ................................................................................ 15
4. OSD Menu & Configuration.................................................................................................... 17
4.2 White Balance Control.................................................................................................................................. 20
4.4.2 Camera Title............................................................................................................................................. 21
4.4.4 TV standard.............................................................................................................................................. 22
The EHH5200 is an HDcctv outdoor dome camera with true Day/Night capability in an IP66 vandal
resistant housing. Based on a 2 megapixel progressive scan sensor for your choice of 1080 or 720
resolution HD 100% digital images, it delivers vastly superior video quality compared to traditional CCTV
images. This superior resolution not only captures more critical evidentiary information, but the inherent
ability for megapixel video to zoom with clarity to 4X or more improves and extends the area of coverage,
expedites completion of investigations, resolves complaints and reduces both capital and operational
costs.
No major upgrade to the IT network is required to deploy this powerful technology; HDcctv cameras
communicate at digital speeds up to 1.5Gb/s over existing or new coaxial cable (RG59 or other types
for longer distances), using industry standard BNC connectors. With vari-focal 3.3~12mm megapixel
auto iris lens the EHH5200 delivers flexible, robust coverage in a wide range of demanding surveillance
environments while delivering stunning HD image quality .
1.1 Main Features
HDcctv 2 Megapixel real time 1920x1080 (or 1280x720) HD video over coax
2 megapixel progressive scan CMOS sensor
Supports video outputs of 1080i, 1080p and 720p (field select)
True day/night operation with automatic ICR module
3.3~12mm AI VF megapixel lens captures the desired field of view
Field select choice of wall or ceiling mounting
Easy to use OSD setup menu
SD TV Out (BNC) for aim and focus using a standard hand held test monitor
Dual Power Source 12VDC/24VAC dual voltage auto polarity detect
Vandal resistant
Weatherproof IP66 rated
1.2 Package Contents
Please be careful when you unpack the box and the electronic devices inside. Check and make
sure that you have all the items listed below inside the original box:
Camera Unit x 1
This Operation Manual x 1
Mounting kit includes:
-Long Screws x 3 (for mounting the base)
-Expanding Anchors x 3
-Washers x 3
Installation Template Sticker x 1
- 3 -
Video Test Cable x 1
Power Supply Pigtail x 1
Desiccant Pack x 1
Please Note: If an item appears to have been damaged in shipment, replace it properly in its carton
and notify the shipper. If any items are missing, notify your EverFocus Electronics Corp. Sales
Representative or Customer Service. The shipping carton is the safest container in which the unit may
be transported. Save it for possible future use.
- 4 -
1.3 Specifications
Pickup Device 1/2.7" 2 megapixel CMOS sensor
Image area for FOV 1080 mode: 6.61 mm diagonal; 5.76 mm H x 3.24 mm V
Image area for FOV 720 mode: 4.41 mm diagonal; 3.84 mm H x 2.16 mm V
Sensitivity 0.5lux/F=1.4
S/N Ratio 45dB
Video Format Main Output HDcctv
Resolution Main Output 1920x1080 or 1280x720 field select
Video Mode Main Output Field select 1080i60, 1080p30 or 720p60 for 60Hz systems
1080i50, 1080p25 or 720p50 for 50Hz systems
Main Output Connector BNC-F
Video Format Test Output NTSC/PAL selectable 1V p-p
Test Output Connector Pin header; adapter cable to BNC-F supplied
Electronic Shutter Auto, 1/60(1/50)~1/8000
Lens Type Megapixel Varifocal lens, Auto Iris, f=3.3~12mm, F=1.4
True Day/Night Control Yes (Auto IR cut filter removal)
Back Light Compensation On/Off selectable
Auto Gain Control High/Middle/Low/Off selectable
Auto White Balance AWB/One Push WB/Manual WB/Indoor/Outdoor selectable
Gamma Correction PC/TV selectable
OSD Menu Yes (controlled from 5-axis joystick control)
Mirror H_MIR/V_MIR/Rotate
Power Source 12VDC/24VAC
Power Consumption 24VAC: 5.5W max. (230mA nominal)
12VDC: 3.3W max. (275mA nominal)
Dimensions (
Weight 740kg /1.6 lbs
Operating Temperature -10°C~50°C ; 14°F~122°F
Weatherproof IP66 rated
Vandal Resistant Yes
Certifications FCC/CE
ϕxH
) 123 mm (O.D.) x 107.8 mm (H)/ 4.8” (O.D.) x 4.2 “(H)
- 5 -
1.4 Dimensions
123mm x 107.8mm ; 4.8” x 4.2”
Ø 5.143mm//0.2”
Ø 94.7mm/3.78”
- 6 -
2. NAMES AND FUNCTIONS OF PARTS
2.1 Camera Component Description
Exterior view
Base
Outer Cover ring
Rotatable cover
2.2 Front And Back Panel Layout
Front Panel Layout:
(1)
(2)
(3)
(4)
- 7 -
Loading...
+ 17 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.