EverFocus EHD935F eZ.HD Series User Manual
EHD935F eZ.HD Series
1080p Full High Definition
True Day/Night Outdoor IR Vandal Dome Camera
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: February 2016
Precautions
1. Do not install the camera near electric or magnetic fields. Install the camera away from
TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the
electromagnetic fields generated from these devices may distort the video image or
otherwise interfere with camera operation.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein. Improper disassembly or introduction of
corrosive materials may result in equipment failure or other damage.
3. Try to avoid facing the camera toward the sun. In some circumstances, direct sunlight may
cause permanent damage to the sensor and/or internal circuits, as well as creating
unbalanced illumination beyond the capability of the camera to compensate.
4. Keep the power cable away from water and other liquids and never touch the power cord
with wet hands. Touching a wet power cord with your hands or touching the power cord
with wet hands may result in electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents. Oil, gas or solvents may
result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning. For cameras with interchangeable lenses, do not touch the surface of the sensor
directly with the hands. Use lens tissue or a cotton tipped applicator and ethanol to clean
the sensor and the camera lens. Use a damp soft cloth to remove any dirt from the camera
body. Please do not use complex solvents, corrosive or abrasive agents for cleaning of any
part of the camera.
7. Do not operate the camera beyond the specified temperature, humidity or power source
ratings. This camera is suitable for indoor operation only. Use the camera at temperatures
within -40°C~50°C (-40°F~122°F) and humidity less than 80%; this device is not rated as
submersible. The input power source is 12VDC or 24VAC. Be sure to connect the proper + / -
polarity and voltage, as incorrect polarity or too high a voltage will likely cause the camera
to fail, and such damage is not covered by the warranty.
8. Mounting. Use care in selecting a solid mounting surface which will support the weight of
the camera plus any wind, snow, ice or other loading, and securely attach the camera to the
mounting surface using screws and anchors which will properly support the camera. If
necessary (e.g. when mounting to drop ceilings) use a safety wire to provide additional
support for the camera.
2
Safety Notice
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
3
Contents
1. Introduction...................................................................................................................... 5
1.1 Packing List ..................................................................................................................... 5
1.2 Features .......................................................................................................................... 5
2. Cable Description .............................................................................................................. 6
3. Installation ....................................................................................................................... 7
3.1 Installation and Adjustment ........................................................................................... 7
4. Configuration in the OSD Menu ........................................................................................ 13
5. Specifications ................................................................................................................... 17
4
EHD935F eZ.HD Vandal Dome Camera
1. Introduction
The EverFocus eZ.HD Series EHD935F provides incredible performance in bright light or low light
environments, and the resolution listed in the specification from the actual camera you install. To
take full advantage of the amazing resolution available from this advanced imaging technology, the
EverFocus eZ.HD Series EHD935F uses a vari-focal lens together with 1/2.9" SONY 2.24M pixels
CMOS to deliver 1080p high resolution, 28 LEDs with range of 30m/100ft., together with a useable
native low light sensitivity of 0.08lux without using digital slow shutter. The camera truly provides
optimized images without compromising 1080p high resolution. The Digital Wide Dynamic Range
function provides clear color images in the most challenging of bright or unbalanced lighting
conditions. The true day/night IR enhances images in low light environments with guaranteed ZERO
ghosting. The EHD935F is equipped with a 3-axis rotation mechanical design that delivers wall or
ceiling mounting flexibility and an IP67 weather resistant, vandal proof dome housing. Users can
take the advantage of vari-focal 2.8~12mm DC iris lens to easily adjustable field of view from the
camera. The cameras also feature dual voltage operation and a full suite of OSD Menu and DSP
functions controllable at the camera (3DNR to save DVR HDD space, privacy masking, mirroring, and
much more). This is the camera that you have been waiting for to create analog CCTV systems that
produce astounding image clarity in a wide range of outdoor applications at the widest range of
light levels. The EHD935F supports both NTSC and PAL scanning systems, which can be switched via
OSD.
1.1 Packing List
Camera Body x 1 Screw x 4
User Manual x 1 Screw Driver x 1
Test Lead x 1 Plastic Anchor x 4
Template Plate x 1 DC Power Pigtail Cable x 1
Adapter Plate x 1
Desiccant Bag x 1
Rubber Plate x 1
Hexagon Wrench x 1
Quick Installation Guide x 1
Warning Paper x 1
1.2 Features
1080p full HD with high flexibility and performance for astounding image
1/2 . 9" SONY 2.24M pixels CMOS Sensor, delivering amazing high sensitivity
Vari-focal 2.8~12mm DC iris lens to captures the desired field of view
Extended IR range of up to 30M/100ft. with 28 LEDs (depending on scene IR reflectivity)
5
EHD935F eZ.HD Vandal Dome Camera
D-WDR to improve the visibility under high contrast scene
3D-Noise Reduction ensures less blurry moving subjects, vivid and high SN ratio images
even under low light environments
Weather resistant IP67 and built-in heater
Supports 1080p, 720p & 960H Analog signal output, which can be easily switched by OSD
The flexible angle viewing with its 3 Axis rotation design allows wall or ceiling mounting
eZ.Controller function: Control camera OSD settings and PTZ operation directly from DVR
end
2. Cable Description
No. Name Descriptions
1 Power Cable Connect to a 12VDC or 24VAC power source.
1080p,720p and 960H output, using a 75 Ohm BNC-type
2 Video Output
coaxial cable.
3 Test Lead Connect to a monitor for setting image aim and focus.
Optional power pigtail cable. The red wire is positive (+); while
4 DC Power Pigtail Cable
the black wire is negative (-).
6
Loading...