EverFocus EHD930F eZ.HD Series User Manual

EHD930F eZ.HD Series

1080p Full High Definition True Day/Night
Outdoor IR Vandal Dome Camera

User’s Manual

Copyright © EverFocus Electronics Corp.

Release Date: February 2016

2

Precautions

1. Do not install the camera near electric or magnetic fields. Install the camera away from

TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the

electromagnetic fields generated from these devices may distort the video image or

otherwise interfere with camera operation.

2. Never disassemble the camera beyond the recommendations in this manual nor introduce

materials other than those recommended herein. Improper disassembly or introduction of

corrosive materials may result in equipment failure or other damage.

3. Try to avoid facing the camera toward the sun. In some circumstances, direct sunlight may

cause permanent damage to the sensor and/or internal circuits, as well as creating

unbalanced illumination beyond the capability of the camera to compensate.

4. Keep the power cable away from water and other liquids and never touch the power cord

with wet hands. Touching a wet power cord with your hands or touching the power cord

with wet hands may result in electric shock.

5. Never install the camera in areas exposed to oil, gas or solvents. Oil, gas or solvents may

result in equipment failure, electric shock or, in extreme cases, fire.

6. Cleaning. For cameras with interchangeable lenses, do not touch the surface of the sensor

directly with the hands. Use lens tissue or a cotton tipped applicator and ethanol to clean

the sensor and the camera lens. Use a damp soft cloth to remove any dirt from the camera

body. Please do not use complex solvents, corrosive or abrasive agents for cleaning of any

part of the camera.

7. Do not operate the camera beyond the specified temperature, humidity or power source

ratings. This camera is suitable for indoor operation only. Use the camera at temperatures

within -40°C~50°C (-40°F~122°F) and humidity less than 80%; this device is not rated as

submersible. The input power source is 12VDC or 24VAC. Be sure to connect the proper + / -

polarity and voltage, as incorrect polarity or too high a voltage will likely cause the camera

to fail, and such damage is not covered by the warranty.

8. Mounting. Use care in selecting a solid mounting surface which will support the weight of

the camera plus any wind, snow, ice or other loading, and securely attach the camera to the

mounting surface using screws and anchors which will properly support the camera. If

necessary (e.g. when mounting to drop ceilings) use a safety wire to provide additional

support for the camera.

3

Safety Notice

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

4

Contents

1. Introduction...................................................................................................................... 5

1.1 Packing List ..................................................................................................................... 5

1.2 Features .......................................................................................................................... 5

2. Cable Description .............................................................................................................. 6

3. Installation ....................................................................................................................... 7

3.1 Installation and Adjustment ........................................................................................... 7

4. Configuration in the OSD Menu ........................................................................................ 12

5. Specifications ................................................................................................................... 16

EHD930F eZ.HD Vandal Dome Camera

5

1. Introduction

The EverFocus eZ.HD Series EHD930F provides incredible performance in bright light or low light

environments, and the resolution listed in the specification from the actual camera you install. To

take full advantage of the amazing resolution available from this advanced imaging technology, the

EverFocus eZ.HD Series EHD930F uses a vari-focal lens together with 1/2.9" SONY 2.24M pixels

CMOS to deliver 1080p high resolution, 30 LEDs with range of 30m/100ft., together with a useable

native low light sensitivity of 0.01 lux without using digital slow shutter. The camera truly provides

optimized images without compromising 1080p high resolution. The Digital Wide Dynamic Range

for clear color images in the most challenging of bright or unbalanced lighting conditions. The true

day/night IR enhances images in low light environments with guaranteed ZERO ghosting. The

EHD930F is equipped with a 3-axis rotation mechanical design that delivers wall or ceiling mounting

flexibility and an IP66 weather resistant, vandal proof dome housing. Users can take the advantage

of vari-focal 2.8~12mm DC iris lens to easily adjustable field of view. The cameras also feature dual

voltage operation and a full suite of OSD Menu and DSP functions controllable at the camera (3DNR

to save DVR HDD space, privacy masking, mirroring, and much more). This is the camera that you

have been waiting for to create analog CCTV systems that produce astounding image clarity in a

wide range of outdoor applications at the widest range of light levels. The EHD930F supports both

NTSC and PAL scanning systems, which can be switched via OSD.

1.1 Packing List

1.2 Features

 1080p full HD with high flexibility and performance for astounding image
 1/2.9" Sony 2.24M pixels CMOS sensor, delivering amazing high sensitivity
 Vari-focal 2.8~12mm DC iris lens to captures the desired field of view
 Extended IR range of up to 30M/100ft. with 30 LEDs (depending on scene IR reflectivity)
 D-WDR to improve the visibility under high contrast scene

 Camera Body x 1  Screw x 4
 User Manual x 1  Screw Driver x 1
 Test Lead x 1  Plastic Anchor x 4
 Template Plate x 1  DC Power Pigtail Cable x 1
 Rubber Plate x 1
 Adapter Plate x 1

 Desiccant Bag x 1

 Hexagon Wrench x 1
 Quick Installation Guide x 1
 Warning Paper x 1

EHD930F eZ.HD Vandal Dome Camera

6

 3D Noise Reduction ensures less blurry moving subjects, vivid and high SN ratio

images even under low light environment

 Support 1080p, 720p & 960H analog signal output, which can be easily switched using

OSD Joystick

 The flexible angle viewing with its 3 Axis rotation design allows wall or ceiling mounting
 Convenient speedy-mount base plate easily attaches to surface, camera attaches to plate

with machine screw

 eZ.Controller function: Control camera OSD settings and PTZ operation directly from DVR

end

2. Cable Description

No. Name Descriptions

1 Power Cable Connect to a 12VDC or 24VAC power source.

2 Video Output

1080p, 720p and 960H output, using a 75 Ohm BNC-type

coaxial cable.

3 Test Lead Connect to a monitor for setting image aim and focus.

4 DC Power Pigtail Cable

Optional power pigtail cable. The red wire is positive (+);

while the black wire is negative (-).