EverFocus EHD930 User Manual

EHD930 eZ.HD Series

720p Analog High Definition True Day/Night
Outdoor IR Dome Vandal Camera

User’s Manual

Copyright © EverFocus Electronics Corp,

Release Date: Nov., 2014

Precautions

1. Do not install the camera near electric or magnetic fields. Install the camera away from

TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the

electromagnetic fields generated from these devices may distort the video image or

otherwise interfere with camera operation.

2. Never disassemble the camera beyond the recommendations in this manual nor introduce

materials other than those recommended herein. Improper disassembly or introduction of

corrosive materials may result in equipment failure or other damage.

3. Try to avoid facing the camera toward the sun. In some circumstances, direct sunlight may

cause permanent damage to the sensor and/or internal circuits, as well as creating

unbalanced illumination beyond the capability of the camera to compensate.

4. Keep the power cable away from water and other liquids and never touch the power cord

with wet hands. Touching a wet power cord with your hands or touching the power cord

with wet hands may result in electric shock.

5. Never install the camera in areas exposed to oil, gas or solvents. Oil, gas or solvents may

result in equipment failure, electric shock or, in extreme cases, fire.

6. Cleaning. For cameras with interchangeable lenses, do not touch the surface of the sensor

directly with the hands. Use lens tissue or a cotton tipped applicator and ethanol to clean

the sensor and the camera lens. Use a damp soft cloth to remove any dirt from the camera

body. Please do not use complex solvents, corrosive or abrasive agents for cleaning of any

part of the camera.

7. Do not operate the camera beyond the specified temperature, humidity or power source

ratings. This camera is suitable for indoor operation only. Use the camera at temperatures

within -40°C~50°C (-40°F~122°F) and humidity between 20%~ 80%; this device is not rated

as submersible. The input power source is 12VDC or 24VAC. Be sure to connect the proper +

/ - polarity and voltage, as incorrect polarity or too high a voltage will likely cause the

camera to fail, and such damage is not covered by the warranty.

8. Mounting. Use care in selecting a solid mounting surface which will support the weight of

the camera plus any wind, snow, ice or other loading, and securely attach the camera to the

mounting surface using screws and anchors which will properly support the camera. If

necessary (e.g. when mounting to drop ceilings) use a safety wire to provide additional

support for the camera.

2

Safety Notice

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

3

Contents

1. Introduction...................................................................................................................... 5

1.1 Packing List ..................................................................................................................... 5

1.2 Features .......................................................................................................................... 5

2. Cable Description .............................................................................................................. 6

3. Installation ....................................................................................................................... 7

3.1 Installation and Adjustment ........................................................................................... 7

4. Configuration in the OSD Menu ........................................................................................ 12

5. Specifications ................................................................................................................... 16

4

EHD930 eZ.HD Vandal Dome Camera

 Camera Body x 1

 Screw x 4

 User Manual x 1

 Screwdriver x 1

 Test Lead x 1

 Plastic Anchor x 4

 Template Plate x 1

 DC Power Pigtail Cable x 1

 Rubber Plate x 1
 Adapter Plate x 1
 Desiccant Bag x 1

 Hexagon Wrench x 1
 Quick Installation Guide x 1

1. Introduction

Get incredible performance in bright light or low light environments, and the resolution listed in the

specification from the actual camera you install. To take full advantage of the amazing resolution

available from this advanced imaging technology, the EverFocus eZ.HD Series EHD930 uses a

vari-focal lens together with 1/2.8" SONY 1.37M pixels CMOS to deliver 720p high resolution.

Combined with a useable native low light sensitivity of 0.08lux without using digital slow shutter

and 30 LEDs with range of 30m/100feet or more. The camera truly provides HD images without

compromising its 720p video quality, Digital Wide Dynamic Range for clear color images in the most

challenging of bright or unbalanced scene lighting conditions, plus true day/night IR enhanced

images in low light with guaranteed ZERO ghosting. The EHD930 with its 3-axis rotation design

allows wall or ceiling mounting flexibility in an IP66 weather resistant, vandal proof dome housing.

Your choice of vari-focal 2.8~12mm DC iris lens for easily adjustable field of view; dual voltage

operation and a full suite of OSD Menu and DSP functions controllable at the camera (3DNR to save

DVR HDD space, privacy masking, mirroring, and much more) This is the camera that you have been

waiting for to create analog CCTV systems that produce astounding image clarity in a wide range of

outdoor applications at the widest range of light levels.The EHD930 supports both NTSC and PAL

scanning systems, which can be switched via OSD.

1.1 Packing List

1.2 Features

 720p with high flexibility and performance for astounding image
 1/2.8" SONY 1.37M pixels CMOS, very low light sensitivity
 Vari-focal 2.8~12mm DC iris lens to captures the desired field of view
 30 IR LEDs for 30m/100feet range (depending on scene IR reflectivity)
 D-WDR to improve the visibility under high contrast scene

EHD930 eZ.HD Vandal Dome Camera

No.

Name

Descriptions

1

Power Cable

Connect to a 12VDC or 24VAC power source.

2

Dual Video Output

720p and 960H output, using a 75 Ohm BNC-type coaxial

cable.

3

Test Lead

Connect to a monitor for setting image aim and focus.

4

DC Power Pigtail Cable

Optional power pigtail cable. The red wire is positive (+);

while the black wire is negative (-).

 Provides 3D Noise Reduction ensures less blurry moving subjects, vivid and high SN ratio

images even under low light environment

 Support 720p & 960H analog signal output, which can be easily switched by OSD
 Convenient speedy-mount base plate easily attaches to surface, camera attaches to plate

with machine screw

2. Cable Description

6