EverFocus EHD700A Ultra 720+, EHD730A Ultra 720+ User Manual

EHD700A / 730A Ultra 720+ Series

Day/Night Vandal Dome Camera

User’s Manual

Copyright © EverFocus Electronics Corp,

Release Date: January., 2014

2

Precautions

1. Do not install the camera near electric or magnetic fields. Install the camera away from

TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the

electromagnetic fields generated from these devices may distort the video image or

otherwise interfere with camera operation.

2. Never disassemble the camera beyond the recommendations in this manual nor introduce

materials other than those recommended herein. Improper disassembly or introduction of

corrosive materials may result in equipment failure or other damage.

3. Try to avoid facing the camera toward the sun. In some circumstances, direct sunlight may

cause permanent damage to the sensor and/or internal circuits, as well as creating

unbalanced illumination beyond the capability of the camera to compensate.

4. Keep the power cable away from water and other liquids and never touch the power cord

with wet hands. Touching a wet power cord with your hands or touching the power cord

with wet hands may result in electric shock.

5. Never install the camera in areas exposed to oil, gas or solvents. Oil, gas or solvents may

result in equipment failure, electric shock or, in extreme cases, fire.

6. Cleaning. For cameras with interchangeable lenses, do not touch the surface of the sensor

directly with the hands. Use lens tissue or a cotton tipped applicator and ethanol to clean

the sensor and the camera lens. Use a damp soft cloth to remove any dirt from the camera

body. Please do not use complex solvents, corrosive or abrasive agents for cleaning of any

part of the camera.

7. Do not operate the camera beyond the specified temperature, humidity or power source

ratings. This camera is suitable for indoor operation only. Use the camera at temperatures

within -40°C~50°C (-40°F~122°F) and humidity between 20%~ 80%; this device is not rated

as submersible. The input power source is 12VDC or 24VAC. Be sure to connect the proper +

/ - polarity and voltage, as incorrect polarity or too high a voltage will likely cause the

camera to fail, and such damage is not covered by the warranty.

8. Mounting. Use care in selecting a solid mounting surface which will support the weight of

the camera plus any wind, snow, ice or other loading, and securely attach the camera to the

mounting surface using screws and anchors which will properly support the camera. If

necessary (e.g. when mounting to drop ceilings) use a safety wire to provide additional

support for the camera.

3

Safety Notice

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

4

Contents

1. INTRODUCTION .................................................................................... 5

1.1 PACKING LIST..................................................................................................... 6

1.2 FEATURES ......................................................................................................... 6

2. CABLE DESCRIPTION.......................................................................... 7

3. INSTALLATION ..................................................................................... 8

3.1 INSTALLATION AND ADJUSTMENT .......................................................................... 8

4. CONFIGURATION IN THE OSD MENU ............................................... 12

5. SPECIFICATIONS ............................................................................... 15

EHD700A/730 A Ultra 720+ TVL Vandal Dome Camera

1. Introduction

i. EHD700A

Get incredible performance in bright light or low light, and the resolution listed in the specs from

the actual camera you install. To take full advantage of the amazing resolution available from this

advanced imaging technology, the EverFocus Ultra Series EHD700A uses a varifocal lens together

with SONY Exview HAD 960H CCD II to produce in excess of 720 horizontal TV lines of resolution

from each and Ultra Series 720+ camera we deliver. Combined with a useable native low light

sensitivity of 0.05lux without using digital slow shutter, this camera truly provides color without

compromise: over 720TVL resolution, Digital Wide Dynamic Range for clear color images in the most

challenging of bright or unbalanced scene lighting conditions, plus day/night in low light with

guaranteed ZERO ghosting. The EHD700A with its 3 Axis rotation design allows wall or ceiling

mounting flexibility in an IP66 weather resistant, vandal proof dome housing. Your choice of

varifocal 2.8~12mm DC iris lens for easily adjustable field of view; Dual voltage operation and a full

suite of OSD Menu and DSP functions controllable at the camera (DNR to save DVR HDD space,

privacy masking, mirroring, and much more) This is the camera that you have been waiting for to

create analog CCTV systems that produce astounding image clarity in a wide range of outdoor

applications at the widest range of light levels.

ii. EHD730A

Get incredible performance in bright light or low light, and the resolution listed in the specs from

the actual camera you install. To take full advantage of the amazing resolution available from this

advanced imaging technology, the EverFocus Ultra Series EHD730A uses a vari-focal lens together

with SONY EXview HAD 960H CCD II to produce in excess of 720 horizontal TV lines of resolution

from each and Ultra Series 720+ camera we deliver. Combined with a useable native low light

sensitivity of 0.05lux without using digital slow shutter and 30 LEDs with range of 30m/100feet or

more, this camera truly provides color without compromise: over 720TVL resolution, Digital Wide

Dynamic Range for clear color images in the most challenging of bright or unbalanced scene lighting

conditions, plus true day/night IR enhanced images in low light with guaranteed ZERO ghosting. The

EHD730A with its 3 Axis rotation design allows wall or ceiling mounting flexibility in an IP66 weather

resistant, vandal proof dome housing. Your choice of vari-focal 2.8~12mm DC iris lens for easily

adjustable field of view; Dual voltage operation and a full suite of OSD Menu and DSP functions

controllable at the camera(DNR to save DVR HDD space, privacy masking, mirroring, and much more)

This is the camera that you have been waiting for to create analog CCTV systems that produce

astounding image clarity in a wide range of outdoor applications at the widest range of light levels.

The EHD700A/730A supports both NTSC and PAL scanning systems.

EHD700A/730A Ultra 720+ TVL Vandal Dome Camera

6

1.1 Packing List

1.2 Features

 Ultra resolution of over 720 horizontal TV lines for astounding image
 Exview HAD CCD II delivers amazing ultra high sensitivity of 0.05 lux – very low

light sensitivity without DSS low light boost - Zero Ghosting guaranteed

 Varifocal 2.8~12mm DC iris lens to captures the desired field of view
 30 IR LEDs for 30m/100feet range -depending on scene IR reflectivity (for EHD730A)
 Provides 2D- Noise Reduction to improve picture clarity while enabling DVRs to improve

disk storage utilization

 Easy to use OSD setup menu
 Vandal resistant construction able to withstand intentional damage
 Digital Wide Dynamic Range expansion to deliver properly exposed images despite bright

light sources, deep shadows and/or unbalanced lighting in the scene

 The flexible angle viewing with its 3 Axis rotation design allows wall or ceiling mounting
 IP66 weather resistance rating means that it will withstand the elements of outdoor

conditions

 Convenient speedy-mount base plate easily attaches to surface, camera attaches to plate

with machine screws

 Camera Body x 1

 Screw x 4

 User Manual x 1

 Screwdriver x 1

 Test Lead x 1

 Plastic Anchor x 4

 Template Plate x 1

 DC Power Pigtail Cable x 1

 Rubber Plate x 1
 Adapter Plate x 1

 Hexagon Wrench x 1
 Quick Installation Guide x 1