EverFocus ED Series, EQ350HQ User's Manual And Operation Instructions

ED Series

User’s Manual

and

Operation Instructions

Version 1.1

Notice

This manual is presented to the users of ED series by EverFocus Electronics
Corp. With years of engineering researches, EverFocus has spared all efforts to
provide the high quality products to the worldwide users. For the policy of
continual product improvement, EverFocus reserves the right to make changes to
the product specifications and documentation without notice. All the
components of the products, including accessories, components, and outlook, are
based on the agreements of each deals to satisfy all kinds of users. Please be
advised that every step of operation must follow the instruction of this manual to
keep ED series working under the best condition. Please notice that EverFocus
will not be charged any claims or renewing cases resulted from inappropriate
operation.

Table of Contents

Safety W ar nin g.........................................................................1

Introduction..............................................................................3

Specification..............................................................................4

Major Parts Names and Functions .........................................5

Installation Instructions...........................................................7

Lens Adjustments .....................................................................8

Adjustments..............................................................................9

1. Do not expose the camera to humidity and dust.

Moisture can damage the camera and cause the danger of electric
shock. If the camera is mounted outdoors, a camera housing is
required. Do not install the camera at where there is greasy
smoke or steam, where the humidity is too high, or where there is a
lot of dust to prevent damages to the camera.

2. Do not disassemble the camera.

Do not disassemble the camera body as it is dangerous and may
cause the damages to the camera. Refer all servicing to qualified
service personnel.

3. Handle the camera with care.

Be careful when handling the camera, do not drop it or subject it
too strong shock or vibration to prevent any damages to it.

4. Do not install the camera near electric or magnetic fields.

Installed the camera away from TV, radio transmitter, magnet,
electric motor, transformer, audio speakers because the magnetic
fields generate from above devices will distort the video image.

Safety Warning

1

5. Do not install the camera in the high temperature environment.

Installed the camera away from stoves, or other heat generating
devices, or where it could be subject to direct sunlight as the high
temperatures could cause deformation, discoloration or other
damages of the camera. Install the camera at where the

temperature range will stay between 0℃ to 40℃.

6. Cleaning

Use a soft cloth to remove the dirt from the unit. Use lens tissue
or a cotton tipped applicator and ethanol to clean the camera lens.

2