EverFocus ECZ361 User Manual
EVERFOCUS
High Resolution Weather Resistant
IR Bullet Camera
Operation Instructions
Model No.
Please read this manual first for correct installation and operation. This manual should be retained for future
reference. The information in this manual was current when published. The manufacturer reserves the right
to revise and improve its products. All specifications are therefore subject to change without notice.
ECZ361
PRECAUTIONS
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio
speakers since the electromagnetic fields generated from these devices may distort the video image or
otherwise interfere with camera operation.
2. Never disassemble the camera beyond the recommendations in this manual nor introduce
materials other than those recommended herein. Improper disassembly or introduction of
corrosive materials may result in equipment failure or other damage.
3. Try to avoid facing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor and/or internal
circuits, as well as creating unbalanced illumination beyond the capability of the camera to
compensate.
4. Keep the power cord away from water and other liquids and never touch the power cord with
wet hands. Touching a wet power cord with your hands or touching the power cord with wet hands
may result in electric shock.
1
CAUTION
5. Never install the camera in areas exposed to oil, gas or solvents.
Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases, fire.
6. Cleaning
For cameras with interchangeable lenses, do not touch the surface of the sensor directly with the
hands. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and the camera
lens. Use a damp soft cloth to remove any dirt from the camera body. Please do not use complex
solvents, corrosive or abrasive agents for cleaning of any part of the camera.
7. Do not operate the camera beyond the specified temperature, humidity or power source ratings.
This camera is suitable for indoor and outdoor operation. Use the camera at temperatures within
-10°C to + 50°C (14°F ~ 122°F) and in an IP66 compliant environment; this device is not rated as
submersible. The input power source is 12VDC. Be sure to connect the proper + / - polarity and
voltage, as incorrect polarity or too high a voltage will likely cause the camera to fail, and such
damage is not covered by the warranty. The use of properly fused or Class 2 power limited type
supplies is highly recommended.
8. Mounting
Use care in selecting a solid mounting surface which will support the weight of the camera plus any
wind, snow, ice or other loading, and securely attach the camera to the mounting surface using screws
and anchors which will properly support the camera. If necessary (e.g. when mounting to drop ceilings)
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK ), NO USER SERVICE ABLE PARTS INSIDE.
REF ER S ERV ICING TO QU ALIFI ED SERV ICE PE RSO NNEL.
use a safety wire to provide additional support for the
camera.
2
OVERVIEW
The ECZ361 is a compact weather resistant IR bullet camera suitable for indoor or outdoor
installation, utilizing a Sony 1/3” 960H EXview HAD II CCD Sensor to provide enhanced low
light sensitivity plus 700 TV lines of color video resolution for surveillance applications. Only
2.9”/74mm in diameter and 4.3”/110mm long, it delivers high efficiency IR performance to a
range of ~98ft./30m even during zero light situations in an IP66 rated weather resistant housing.
This powerful combination of capabilities makes the ECZ361 the right choice for high image
quality, value and performance in a wide range of day and night surveillance systems.
FEATURES
Color day/night IR performance in a compact bullet housing (only 2.9”/74mm in diameter
and 4.3”/110mm long)
SONY 1/3” 960H EXview HAD II high resolution CCD sensor for 700TVL resolution
Employs SONY Enhanced Effio-E Digital Signal Processor (DSP) chip-set for advanced
image processing
High sensitivity, low smear, anti-blooming and high S/N ratio improve image quality.
Automatic Electronic Shutter (AES), Auto Gain Control (AGC) and Auto White Balance
(AWB) for clear images in all conditions.
Advanced DSP functions: Digital WDR/ATR (Adaptive Tone Reproduction), 2D-NR (2D
Noise Reduction), Anti CR (Anti Color Rolling) enhance image quality
Built-in anti-aliasing function and IR-pass (850nm) optical filter.
Thirty high efficiency IR-LEDs with a range of ~98 ft./30m coverage in low light
environments.
Removable sunshield for indoor appearance provides thermal management in direct sunlight
Mount can be attached to bottom for pedestal mount or top for pendant mount
PACKAGE CONTENTS
Camera Unit x 1
Mounting kit includes:
-Bracket x 1
-Screws x 3
-Plastic anchors x 3
Operation Instructions (this document) x 1
Loading...