EverFocus ECORHD16X1-16T Installation Guide

How to Connect HD / SD Cameras to ECOR HD 16X 1 Video Inputs?

8 7 6 5 4 3 2 1

SD Camera

Monitor

CH 1 CH 2

CH 3

CH 4

HD Camera

HD Camera SD Camera

1

2

3

4

SD Camera SD Camera

HD Camera

HD Camera

Video Inputs

SD Camera

Monitor

CH 1 CH 2

CH 3

CH 4

HD Camera

HD Camera

SD Camera

1

2

3

4

SD Camera

SD Camera

HD Camera

HD Camera

Video Inputs

P/N: 4605PECA16B022A

The ECOR HD 16X1 DVR has 16 video inputs which are all compatible with both HD (EverFocus

eZ.HD series camera) and SD cameras*; however, the 16 video inputs are divided into 8 pairs

as the figure below. Therefore, when connecting HD and SD cameras to the DVR, you should

connect either type of the above cameras to the SAME pair video inputs.

* The eZ.HD series DVR doesn’t support HD-TVI / HD-CVI cameras.

Example

1. If you have two HD cameras and two SD cameras, you should connect the two HD

cameras to one pair of the video inputs and plug the two SD cameras to another pair of

the video inputs (see Figure 1).

2. If you connect an HD and a SD camera to the same pair of the video inputs, it will only

display HD camera live view on the screen. As for the SD camera channel, it will just pop

up status icons to indicate you that it’s not an eZ.HD (HD) camera so you need to re-plug

the SD camera to a new pair of video inputs or to the pair of video inputs with the other

SD camera already connected. (see Figure 2).

Figure 1 Figure 2

1