EverFocus EBA2580 User Manual
EBA2580 eZ.HD Series
5MP, IP66 IR Dome Camera
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: May, 2019
All the images including product pictures or screen shots in this document are for example
only. The images may vary depending on the product and software version. Information
contained in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw
Camera x 1
Screw & Screw Anchor x 4
98mm
/
3
.
86
"
120mm /
4.72"
60
.2
mm / 2
.37"
1. Introduction
EverFocus eZ.HD series cameras – EBA2580 deliver 5MP image quality. The
model is equipped with Sony STARVIS CMOS sensor and provides 2.8-12mm
lens with ICR. Featured with True Wide Dynamic Range (T-WDR), the camera
can provide clear images even under backlight circumstances where intensity
of illumination can vary excessively. The EBA2580 supports both NTSC and PAL
scanning systems and is IP66 certified.
1.1 Packing List
Mounting Sticker x 1
L-Type Wrench x 1
User Manual x 1
1.2 Features
Equipped with Sony STARVIS 5MP CMOS sensor
Varifocal 2.8-12mm with ICR to capture the desired field of view
Extended IR range of up to 30m / 98ft. with 24 LEDs (depends on scene
IR reflectivity)
T-WDR to improve the visibility under high contrast scene
The flexible angle viewing with its 3-Axis rotation design allows wall or
ceiling mounting
IP66-rated with metal housing
Supports UTC function: Control camera OSD settings from DVR end
1.3 Dimensions
1
2
E320
EB45
12VDC
Power Cable
Video Output Cable
(BNC,
75Ohm)
Outer Housing
Camera Base
Camera Body
1.4 Optional Accessory
BA-
Color / Material: White / Metal
Size (Φ x H): 138 x 54mm / 5.43” x 2.13”
Weight: 700g / 1.5lb
BA-
Color / Material: White / Metal
Size (W x D x H): 245 x 160 x 163mm / 9.65”x 6.3”x 6.42”
Weight: 2.1kg / 4.63lb
1.5 Cable Description
2. Installation
1. Stick the supplied Mounting Sticker to the surface to mark the 4 screw
positions. Drill four holes on the surface and insert the supplied 4 Screw
Anchors into the screw holes. If you want to run the cable through the
surface, drill a hole within the 4 screw area.
2. Unscrew the Outer Housing by twisting it counterclockwise and then
remove it from the Camera Base.
3. Screw the Camera Base to the surface with the supplied four Screws.
Loading...