Everdure RBES64, RBES65, RBES91, RBES92, RBES96 Installation, Operation & Maintenance Instructions Manual

DESIGNED TO PERFECTION

INSTALLATION, OPERATION

& MAINTENANCE INSTRUCTIONS

FOR EVERDURE RANGE HOOD

Models Included:

RBES63
RBES64
RBES65
RBES91
RBES92
RBES96

DESIGNED TO PERFECTION

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS FOR

EVERDURE RANGE HOOD RBES63, RBES64, RBES65, RBES91, RBES92, RBES96

CONTENTS

SECTION PAGE NO.

Important Safety Instructions……………… 3
Appliance Details ………………………… 4
General Information …………………….. 4
What Is Supplied ………….……………… 4
What May Be Needed For Installation … 4
Installation Instructions …………………… 4-7
Operating Instructions …………………… 7-8
Cleaning …………………………………… 9
Replacing The Bulbs ….………………….. 9-10
Troubleshooting …………………………… 10

It is important that you retain these instructions, proof of purchase as well as

other important documents about this product for future reference.

Due to continual product development, Everdure reserves the right to alter

specifications or appearances without notice.

Dispose of packaging responsibly – recycle where facilities are available.

2

DESIGNED TO PERFECTION

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT: Read the assembly instruction section and safety precautions of this booklet

carefully before removing the contents of this carton.

1. In certain circumstances electrical appliances may be a danger hazard.

2. This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience or knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety. Children should
be supervised to insure that they do not play with the appliance.

3. Do not check the status of the filters while the cooker hood is operating.

4. Do not touch the light bulbs after appliance use.

5. Do not disconnect the appliance with wet hands and do not disconnect the power cord with extreme

force.

6. Do not flambé underneath range hood.

7. Avoid free flame, as it may cause damage to the filters and be a fire hazard.

8. If frying food, ensure to check regularly to avoid the oil overheating and becoming a fire hazard.

9. Unplug the appliance before carrying out maintenance or replacing lamps.

10. If the power cord is damaged, it must be replaced by the manufacturer, an authorized service centre or

similarly qualified persons to avoid a hazard.

11. Indoor use only.

12. When the appliance is not in use and before cleaning, unplug the appliance from the outlet.

13. It is recommended to operate the range hood prior to cooking.

14. It is recommended to leave the range hood in operation for 15 minutes after cooking is terminated in

order to completely eliminate cooking vapours and odours.

15. Turn off the range hood when not in use.

16. Don’t use the range hood if it is damaged, especially the supply cord and the case.

17. Don’t immerse the range hood in liquid.

18. The exhaust air must not be discharged into a flue which is used for exhausting fumes from appliance

burning gas or other fuels (not applicable to appliances that only discharge the air back into the room).

19. Regulations concerning the discharge of air have to be fulfilled. There shall be adequate ventilation of

the room when the range hood is used at the same time as appliances burning gas of other fuels.

20. Clean the surface of the cooker hood regularly using cloth moistened with denatured alcohol of non

abrasive liquid detergent.

21. There is a fire risk if cleaning is not carried out in accordance with the instruction.

22. The 600mm units are intended for use above hobs with four elements and the 900mm units are

intended for use above hobs units with five elements.

23. If the instruction for the minimum distance between the supporting surface of the cooking vessels on the

hob and the lowest part of the range hood are specified by hob instructions, these instructions should be
taken into account.

24. CAUTION: Accessible parts may become hot when used with cooking appliances.

DO NOT OPERATE THIS APPLIANCE BEFORE READING THE

INSTRUCTION BOOKLET

3

DESIGNED TO PERFECTION

APPLIANCE DETAILS

Voltage & Frequency: 220-240V 50Hz

Lamp Max:

RBES63, RBES91, RBES92, RBES64:2x20W G4 halogen lamps

RBES65, RBES96: 2x40W E14 lamps

Rated Input Power: RBES63, RBES91, RBES92:230W RBES64:165W RBES65, RBES96:205W

GENERAL INFORMATION

Before installing and operating the range hood, carefully read the following important information regarding
installation safety and maintenance. Keep this information booklet accessible for further consultations.
The appliance has been designed to exhaust cooking fumes externally. Before installation, please ensure that
the following have been supplied and that the tools listed below are readily available.

WHAT IS SUPPLIED

Range hood (including one way valve for flue x 1) x 1.
Installation kit x 1 – RBES63, RBES65, RBES91 & RBES96: 8mm bolts x 10, 30mm screws x 2, 40mm screws x 7,
plastic plugs x 9.
Installation kit x 1 – RBES64: 8mm bolts x 8, 30mm screws x 2, 40mm screws x 7, plastic plugs x 9.
Installation kit x 1 – RBES92: 8mm bolts x 8, 25mm bolts (with nuts & washers) x 4, 30mm screws x 2, 40mm
screws x 7, plastic plugs x 9.
Mounting brackets x 3.
Instruction booklet x 1.

WHAT MAY BE NEEDED FOR INSTALLATION

Electric Drill Duct Tape
Tape Measure Jig Saw
Spirit Level Ladder
Screwdrivers Torch (If natural lighting is minimal)

INSTALLATION INSTRUCTIONS

Please ensure that before installing the range hood, all power is switched off.
Installation must be in accordance to the local electrical authority and codes.
This range hood must be earthed at all times for the operators’ safety.
The switched power outlet for the range hood should be positioned to enable the user to turn the power off,
to enable cleaning and any maintenance required.
The switched power outlet should be installed within 600mm from the rear of the unit.
Ensure that when installing the range hood, that it is protected from any possible damage from tools etc.
Ducting for this unit must be installed in accordance to the local authority.
Ensure that the fixings used for this range hood are suitable.
Check the area where the range hood is to be fitted, to ensure that it is structurally sound.
The Everdure RBES63, RBES64, RBES65, RBES91, RBES92 & RBES96 range hoods are intended to be installed
directly onto a wall.

4